Rubber hoses and hose assemblies — Part 1: On-shore oil suction and discharge — Specification

Rubber hoses and hose assemblies — Part 2: Ship/dockside discharge — Specification

Rubber hoses for oil suction and discharge

Rubber hose and hose assemblies for oil suction and discharge service — Specification

Equipment for the petroleum and natural gas industries — Steel pipe flanges, nominal sizes 1/2 to 24 in — Metric dimensions

Buried unplasticized polyvinyl chloride (PVC) pipes for the supply of gaseous fuels — Metric series — Specification

Rubber hose for liquefied petroleum gases (LPG)

Rubber hoses and hose assemblies for liquefied petroleum gases (LPG) — Bulk transfer applications — Specification

Rubber hoses and hose assemblies for liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas up to 25 bar (2,5 MPa) — Specification

Rubber hoses and hose assemblies for liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas up to 2,5 MPa (25 bar) — Specification

Rubber hose for fuel truck delivery

Rubber hoses for bulk fuel truck delivery — Specification

Rubber hoses and hose assemblies for bulk fuel delivery by truck — Specification

Rubber hoses and hose assemblies for bulk fuel delivery by truck — Specification

Rubber hoses and hose assemblies for bulk fuel delivery by truck — Specification

Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 1: Pipes of requirement class A

Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 2: Pipes of requirements class B

Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 3: Pipes of requirement class C

Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 3: Pipes of requirement class C — Technical Corrigendum 1

Oil and natural gas industries — Steel line pipe

Petroleum and natural gas industries — Steel pipe for pipeline transportation systems

Petroleum and natural gas industries — Steel pipe for pipeline transportation systems

Petroleum and natural gas industries — Steel pipe for pipeline transportation systems — Amendment 1

Petroleum and natural gas industries — Steel pipe for pipeline transportation systems

Oil and gas industries including lower carbon energy — Full ring ovalization test method for the evaluation of the cracking resistance of steel line pipe in sour service

Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) — Part 1: General

Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 1: General

Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 1: General

Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) — Part 2: Pipes

Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 2: Pipes

Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 2: Pipes

Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 3: Fittings

Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 3: Fittings

Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 3: Fittings

Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 4: Valves

Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 4: Valves

Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) — Part 5: Fitness for purpose of the system

Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 5: Fitness for purpose of the system

Buried polyethylene (PE) pipes for the supply of gaseous fuels — Metric series — Specification

Buried polyethylene (PE) pipes for the supply of gaseous fuels — Metric series — Specifications

Buried polyethylene (PE) pipes for the supply of gaseous fuels — Metric series — Specifications — Technical Corrigendum 1

Buried polyethylene (PE) pipes for the supply of gaseous fuels — Metric series — Specifications

Loading and unloading of liquefied natural gas (LNG) tank wagons and containers

Rubber hoses — Measured fuel dispensing — Part 1: Conventional petroleum based fuels — Specification

Rubber hoses and hose assemblies for measured fuel dispensing — Specification

Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems — Specification

Oil and gas industries including lower carbon energy — Pipeline transportation systems — Terms and definitions

Rubber seals — Joint rings used for gas supply pipes and fittings — Specification for material

Rubber seals — Joint rings used for petroleum product supply pipes and fittings — Specification for material

Plastics hoses for suction and low-pressure discharge — Petroleum liquids — Specification

Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids — Specification

Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids — Specification

Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels — Part 1: Pipes for a maximum operating pressure of 1 bar (100 kPa)

Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels — Part 2: Fittings for a maximum operating pressure of 200 mbar (20 kPa)

Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels — Part 3: Fittings and saddles for a maximum operating pressure of 1 bar (100 kPa)

Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels — Part 4: Code of practice for design, handling and installation

Buried, high-impact poly(vinyl chloride) (PVC-HI) pipes for the supply of gaseous fuels — Specification

Buried, high-impact poly(vinyl chloride) (PVC-HI) pipes for the supply of gaseous fuels — Specifications

Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels — Metric series — Specifications — Part 1: Fittings for socket fusion using heated tools

Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels — Metric series — Specifications — Part 1: Fittings for socket fusion using heated tools — Technical Corrigendum 1

Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels — Metric series — Specifications — Part 2: Spigot fittings for butt fusion, for socket fusion using heated tools and for use with electrofusion fittings

Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels — Metric series — Specifications — Part 2: Spigot fittings for butt fusion, for socket fusion using heated tools and for use with electrofusion fittings — Technical Corrigendum 1

Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels — Metric series — Specifications — Part 2: Spigot fittings for butt fusion, for socket fusion using heated tools and for use with electrofusion fittings — Technical Corrigendum 2

Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels — Metric series — Specifications — Part 3: Electrofusion fittings

Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels — Metric series — Specifications — Part 3: Electrofusion fittings — Technical Corrigendum 1

Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels — Metric series — Specifications — Part 3: Electrofusion fittings — Technical Corrigendum 2

Road vehicles — Nozzle spouts for unleaded gasoline

Road vehicles — Nozzle spouts for leaded gasoline and diesel fuel

Petroleum and natural gas industries — Flexible pipe systems for subsea and marine riser applications

Gas cylinders — Refillable welded steel cylinders for liquefied petroleum gas (LPG) — Periodic inspection and testing

Determination of the thermal stability of polyethylene (PE) for use in gas pipes and fittings

Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels — Part 1: Metal fittings for pipes of nominal outside diameter less than or equal to 63 mm

Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels — Part 2: Metal fittings for pipes of nominal outside diameter greater than 63 mm

Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels — Part 3: Thermoplastics fittings for pipes of nominal outside diameter less than or equal to 63 mm

Polyethylene pipes and fittings for the supply of gaseous fuels — Code of practice for design, handling and installation

Polyethylene pipes and fittings for the supply of gaseous fuels — Code of practice for design, handling and installation

Polyethylene (PE) valves for gas distribution systems

Plastics piping systems for renovation of underground gas supply networks — Part 1: General

Plastics piping systems for renovation of underground gas supply networks — Part 1: General

Plastics piping systems for renovation of underground gas supply networks — Part 2: Lining with continuous pipes

Plastics piping systems for renovation of underground gas supply networks — Part 3: Lining with close-fit pipes

Plastics piping systems for renovation of underground gas supply networks — Part 3: Lining with close-fit pipes

Piping systems for rehabilitation of underground gas supply networks — Part 1: Polyethylene (PE) material

Crude petroleum and petroleum products — Bulk cargo transfer — Guidelines for achieving the fullness of pipelines

Rubber hoses and hose assemblies for dispensing liquefied petroleum gases (LPGs) — Specification

Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 1: Butt fusion

Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 1: Butt fusion

Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 1: Butt fusion

Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 1: Butt fusion

Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 2: Electrofusion

Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 2: Electrofusion

Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 2: Electrofusion — Amendment 1

Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 2: Electrofusion

Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 3: Operator's badge

Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 3: Operator's badge

Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 3: Operator's badge

Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 4: Traceability coding

Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 5: Two-dimensional data coding of components and data exchange format for PE piping systems

Petroleum, petrochemical and natural gas industries — Reliability modelling and calculation of safety systems

Petroleum and natural gas industries — Mechanical integrity and sizing of actuators and mounting kits for pipeline valves

Oil and gas industries including lower carbon energy — Pipeline transportation systems — Recommended practice for pipeline life extension

Petroleum and natural gas industries — Pipeline transportation systems — Recommended practice for pipeline life extension

Qualification of casing connections for thermal wells

Qualification of casing connections for thermal wells

Liquefied natural gas (LNG) — Tanks for on-board storage as a fuel for automotive vehicles

Petroleum and natural gas industries — Pipeline transportation systems

Petroleum and natural gas industries — Pipeline transportation systems

Petroleum and natural gas industries — Pipeline transportation systems

Petroleum and natural gas industries — Pipeline transportation systems — Amendment 1: Complementary requirements for the transportation of fluids containing carbon dioxide or hydrogen

Petroleum and natural gas industries — Procedures for testing casing and tubing connections

Petroleum and natural gas industries — Procedures for testing casing and tubing connections

Petroleum and natural gas industries — Pipeline transportation systems — Welding of pipelines

Petroleum and natural gas industries — Pipeline transportation systems — Welding of pipelines — Technical Corrigendum 1

Petroleum and natural gas industries — Pipeline transportation systems — Welding of pipelines

Petroleum and natural gas industries — Collection and exchange of reliability and maintenance data for equipment

Petroleum, petrochemical and natural gas industries — Collection and exchange of reliability and maintenance data for equipment

Petroleum, petrochemical and natural gas industries — Collection and exchange of reliability and maintenance data for equipment

Petroleum and natural gas industries — Pipeline transportation systems — Pipeline valves

Petroleum and natural gas industries — Pipeline transportation systems — Pipeline valves

Petroleum and natural gas industries — Pipeline transportation systems — Pipeline valves — Technical Corrigendum 1

Oil and gas industries including lower carbon energy — Pipeline transportation systems — Pipeline valves

Plastics pipes and fittings — Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels — Metric series — Specifications — Part 1: Pipes

Plastics pipes and fittings — Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels — Metric series — Specifications — Part 2: Fittings for heat-fusion jointing

Plastics pipes and fittings — Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels — Metric series — Specifications — Part 3: Fittings for mechanical jointing (including PE-X/metal transitions)

Plastics pipes and fittings — Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels — Metric series — Specifications — Part 3: Fittings for mechanical jointing (including PE-X/metal transitions)

Plastics pipes and fittings — Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels — Metric series — Specifications — Part 4: System design and installation guidelines

Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 1: Vocabulary, symbols, applications and materials

Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 1: Vocabulary, symbols, applications and materials

Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 2: Qualification and manufacture

Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 2: Qualification and manufacture — Technical Corrigendum 1

Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 2: Qualification and manufacture

Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 3: System design

Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 3: System design — Technical Corrigendum 1

Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 3: System design

Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 4: Fabrication, installation and operation

Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 4: Fabrication, installation and operation — Technical Corrigendum 1

Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 4: Fabrication, installation and operation

Petroleum and natural gas industries — Pipeline transportation systems — Subsea pipeline valves

Petroleum and natural gas industries — Pipeline transportation systems — Subsea pipeline valves

Oil and gas industries including lower carbon energy — Pipeline transportation systems — Subsea pipeline valves

Petroleum and natural gas industries — Cathodic protection of pipeline transportation systems — Part 1: On-land pipelines

Petroleum, petrochemical and natural gas industries — Cathodic protection of pipeline systems — Part 1: On-land pipelines

Oil and gas industries including lower carbon energy — Cathodic protection of pipeline transportation systems — Part 1: On-land pipelines

Petroleum and natural gas industries — Cathodic protection of pipeline transportation systems — Part 2: Offshore pipelines

Petroleum, petrochemical and natural gas industries — Cathodic protection of pipeline transportation systems — Part 2: Offshore pipelines

Oil and gas industries including lower carbon energy — Cathodic protection of pipeline transportation systems — Part 2: Offshore pipelines

Petroleum and natural gas industries — Induction bends, fittings and flanges for pipeline transportation systems — Part 1: Induction bends

Petroleum and natural gas industries — Induction bends, fittings and flanges for pipeline transportation systems — Part 1: Induction bends

Petroleum and natural gas industries — Induction bends, fittings and flanges for pipeline transportation systems — Part 1: Induction bends

Oil and gas industries including lower carbon energy — Factory bends, fittings and flanges for pipeline transportation systems — Part 1: Induction bends

Petroleum and natural gas industries — Induction bends, fittings and flanges for pipeline transportation systems — Part 2: Fittings

Petroleum and natural gas industries — Factory bends, fittings and flanges for pipeline transportation systems — Part 2: Fittings

Petroleum and natural gas industries — Induction bends, fittings and flanges for pipeline transportation systems — Part 3: Flanges

Petroleum and natural gas industries — Factory bends, fittings and flanges for pipeline transportation systems — Part 3: Flanges

Petroleum and natural gas industries — Factory bends, fittings and flanges for pipeline transportation systems — Part 4: Factory cold bends

Petroleum and natural gas industries — Piping

Road vehicles — Blended fuels refuelling connector

Road vehicles — Blended fuels refuelling connector — Amendment 1

Petroleum and natural gas industries — Pipeline transportation systems — Design, construction and maintenance of steel cased pipelines

Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 1: General

Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 1: General — Amendment 1

Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 1: General

Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 1: General

Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 2: Pipes

Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 2: Pipes — Amendment 1

Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 2: Pipes

Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 2: Pipes

Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 3: Fittings

Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 3: Fittings — Amendment 1

Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 3: Fittings

Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 3: Fittings

Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 4: Valves

Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 4: Valves

Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 4: Valves

Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 5: Fitness for purpose of the system

Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 5: Fitness for purpose of the system

Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 6: Code of practice for design, handling and installation

Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 6: Code of practice for design, handling and installation

Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 7: Assessment of conformity

Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 8: Training and assessment of fusion operators

Petroleum and natural gas industries — Pipeline transportation systems — Reliability-based limit state methods

Natural gas fuelling stations — CNG stations for fuelling vehicles

Natural gas fuelling stations — CNG stations for fuelling vehicles

Natural gas fuelling stations — LNG stations for fuelling vehicles

Natural gas fuelling stations — LNG stations for fuelling vehicles

Petroleum, petrochemical and natural gas industries — Internal coating and lining of steel storage tanks

Oil and gas industries including lower carbon energy — Internal coating and lining of steel storage tanks

Petroleum and natural gas industries — Guidelines for the marine interfaces of hybrid LNG terminals

Metal ball valves for petroleum, petrochemical and allied industries

Metal ball valves for petroleum, petrochemical and allied industries

Plastics piping systems — Mechanical fittings for pressure piping systems — Specifications

Plastics piping systems — Mechanical fittings for pressure piping systems — Specifications — Amendment 1

Plastics piping systems — Mechanical fittings for pressure piping systems — Specifications

Plastics piping systems — Multilayer piping systems for outdoor gas installations — Specifications for systems

Plastics piping systems — Multilayer piping systems for outdoor gas installations — Specifications for systems

Plastics pipes and fittings — Reinforced thermoplastics pipe systems for the supply of gaseous fuels for pressures up to 4 MPa (40 bar)

Guidelines for systems and installations for supply of LNG as fuel to ships

Guidelines for safety and risk assessment of LNG fuel bunkering operations

Petroleum, petrochemical and natural gas industries — Qualification testing and acceptance criteria for protective coating systems under insulation

Petroleum and natural gas industry — Pipeline transportation systems — Pipeline integrity management specification — Part 1: Full-life cycle integrity management for onshore pipeline

Petroleum and natural gas industry — Pipeline transportation systems — Pipeline integrity management specification — Part 2: Full-life cycle integrity management for offshore pipeline

Determination of the resistance to cryogenic spillage of insulation materials — Part 1: Liquid phase

Determination of the resistance to cryogenic spill of insulation materials — Part 2: Vapour exposure

Determination of the resistance to cryogenic spillage of insulation materials — Part 3: Jet release

Installation and equipment for liquefied natural gas — Design of floating LNG installations — Part 1: General requirements

Installation and equipment for liquefied natural gas — Design of floating LNG installations — Part 2: Specific FSRU issues

Oil and gas industries including lower carbon energy — Guidelines for green manufacturing and lower carbon emission of oil and gas-field equipment and materials

Petroleum, petrochemical and natural gas industries — Production assurance and reliability management

Petroleum, petrochemical and natural gas industries — Production assurance and reliability management

Plastics pipes and fittings — Butt fusion jointing procedures for polyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems

Plastics pipes and fittings — Butt fusion jointing procedures for polyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems

Plastics pipes and fittings — Butt fusion jointing procedures for polyethylene (PE) piping systems

Plastics pipes and fittings — Butt fusion jointing procedures for polyethylene (PE) piping systems — Amendment 1

Petroleum and natural gas industries — Pipeline transportation systems — Test procedures for mechanical connectors

Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 1: Polyolefin coatings (3-layer PE and 3-layer PP)

Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 1: Polyolefin coatings (3-layer PE and 3-layer PP)

Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 2: Fusion-bonded epoxy coatings

Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 2: Fusion-bonded epoxy coatings — Technical Corrigendum 1

Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 2: Single layer fusion-bonded epoxy coatings

Oil and gas industries including lower carbon energy — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 2: Single layer fusion-bonded epoxy coatings

Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings

Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings — Amendment 1

Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings

Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings — Amendment 1: Introduction of mesh-backed coating systems

Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 4: Polyethylene coatings (2-layer PE)

Oil and gas industries including lower carbon energy — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 4: Polyethylene coatings (2-layer PE)

Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 5: External concrete coatings

Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 5: External concrete coatings

Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 11: Coatings for in-field application, coating repairs and rehabilitation

Petroleum, petrochemical and natural gas industries — Prevention of corrosion on pipeline systems influenced by stray currents

Oil and gas industries including lower carbon energy — Pipeline transportation systems — Onshore and offshore pipelines pig traps design requirements

Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) — Polyamide (PA) — Part 1: General

Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) — Polyamide (PA) — Part 2: Pipes

Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) — Polyamide (PA) — Part 3: Fittings

Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) — Polyamide (PA) — Part 5: Fitness for purpose of the system

Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) — Polyamide (PA) — Part 6: Code of practice for design, handling and installation

Petroleum and natural gas industry — Pipeline transportation systems — Pipeline integrity assessment specification

Gas cylinders — Transportable refillable welded steel cylinders for liquefied petroleum gas (LPG) — Design and construction

Petroleum and natural gas industries — Corrosion resistant alloy clad bends and fittings for pipeline transportation system — Part 1: Clad bends

Petroleum and natural gas industries — Corrosion resistant alloy clad bends and fittings for pipeline transportation system — Part 2: Clad fittings

Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas — Specification

Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas — Specification

Petroleum and natural gas industries — Installation and equipment for liquefied natural gas — Ship-to-shore interface and port operations