Steel strips for springs, see 77.140.25
Filter :
| Standard and/or project(0) | Stage | TC |
|---|---|---|
|
Steel — Tensile testing of sheet and strip less than 3 mm and not less than 0,5 mm thick
|
95.99 | ISO/TC 164/SC 1 |
|
Simple bend testing of steel sheet and strip less than 3 mm thick
|
95.99 | ISO/TC 164/SC 2 |
|
Reverse bend testing of steel sheet and strip less than 3 mm thick
|
95.99 | ISO/TC 164/SC 2 |
|
Modified Erichsen cupping test for steel sheet and strip
|
95.99 | ISO/TC 164/SC 2 |
|
ISO metric series for basic thicknesses of sheet and diameters of wire
|
95.99 | ISO/TC 62 |
|
Structural steels
|
95.99 | ISO/TC 17/SC 3 |
|
Single cold-reduced tinplate and single cold-reduced blackplate — Part 1: Electrolytic and hot-dipped tinplate sheet and blackplate sheet
|
95.99 | ISO/TC 17 |
|
Single cold-reduced tinplate and single cold-reduced blackplate — Part 2: Electrolytic tinplate coil and blackplate coil for subsequent cutting into sheet form
|
95.99 | ISO/TC 17 |
|
Hot-rolled carbon steel sheet of commercial and drawing qualities
|
95.99 | ISO/TC 17/SC 12 |
|
Hot-rolled carbon steel sheet of commercial and drawing qualities
|
95.99 | ISO/TC 17/SC 12 |
|
Hot-rolled carbon steel sheet of commercial and drawing qualities
|
95.99 | ISO/TC 17/SC 12 |
|
Hot-rolled carbon steel sheet of commercial and drawing qualities
|
95.99 | ISO/TC 17/SC 12 |
|
Hot-rolled carbon steel sheet of commercial and drawing qualities
|
90.93 | ISO/TC 17/SC 12 |
|
Cold-reduced carbon steel sheet of commercial and drawing qualities
|
95.99 | ISO/TC 17/SC 12 |
|
Cold-reduced carbon steel sheet of commercial and drawing qualities
|
95.99 | ISO/TC 17/SC 12 |
|
Cold-reduced carbon steel sheet of commercial and drawing qualities
|
95.99 | ISO/TC 17/SC 12 |
|
Cold-reduced carbon steel sheet of commercial and drawing qualities
|
95.99 | ISO/TC 17/SC 12 |
|
Cold-reduced carbon steel sheet of commercial and drawing qualities
|
90.93 | ISO/TC 17/SC 12 |
|
Continuous hot-dip zinc-coated carbon steel sheet of commercial, lock-forming and drawing qualities
|
95.99 | ISO/TC 17/SC 12 |
|
Continuous hot-dip zinc-coated carbon steel sheet of commercial, lock-forming and drawing qualities
|
95.99 | ISO/TC 17/SC 12 |
|
Continuous hot-dip zinc-coated carbon steel sheet of commercial and drawing qualities
|
95.99 | ISO/TC 17/SC 12 |
|
Continuous hot-dip zinc-coated carbon steel sheet of commercial and drawing qualities
|
95.99 | ISO/TC 17/SC 12 |
|
Continuous hot-dip zinc-coated and zinc-iron alloy-coated carbon steel sheet of commercial and drawing qualities
|
90.92 | ISO/TC 17/SC 12 |
|
Continuous hot-dip zinc-coated and zinc-iron alloy-coated carbon steel sheet of commercial and drawing qualities
|
60.00 | ISO/TC 17/SC 12 |
|
Hot-rolled carbon steel sheet coils for the production of cold-reduced products
|
95.99 | ISO/TC 17/SC 12 |
|
Tinplate and blackplate — Minimum packaging requirements
|
95.99 | ISO/TC 17 |
|
High yield strength flat steel products — Part 1: General requirements
|
95.99 | ISO/TC 17/SC 3 |
|
High yield strength flat steel products — Part 1: General requirements
|
95.99 | ISO/TC 17/SC 3 |
|
High yield strength flat steel products — Part 1: General requirements — Amendment 1
|
95.99 | ISO/TC 17/SC 3 |
|
High yield strength flat steel products — Part 2: Products supplied in the normalized or controlled rolled condition
|
95.99 | ISO/TC 17/SC 3 |
|
High yield strength flat steel products — Part 2: Products supplied in the normalized or controlled rolled condition
|
95.99 | ISO/TC 17/SC 3 |
|
High yield strength flat steel products — Part 2: Products supplied in the normalized or controlled rolled condition — Amendment 1
|
95.99 | ISO/TC 17/SC 3 |
|
High yield strength flat steel products — Part 3: Products supplied in the heat- treated (quenched + tempered) condition
|
95.99 | ISO/TC 17/SC 3 |
|
High yield strength flat steel products — Part 3: Products supplied in the heat-treated (quenched + tempered) condition
|
95.99 | ISO/TC 17/SC 3 |
|
High yield strength flat steel products — Part 3: Products supplied in the heat-treated (quenched + tempered) condition — Amendment 1
|
95.99 | ISO/TC 17/SC 3 |
|
Cold-reduced carbon steel strip with a carbon content over 0,25 %
|
95.99 | ISO/TC 17/SC 12 |
|
Cold-reduced carbon steel strip with a carbon content over 0,25 %
|
95.99 | ISO/TC 17/SC 12 |
|
Cold-reduced carbon steel strip with a mass fraction of carbon over 0,25 %
|
95.99 | ISO/TC 17/SC 12 |
|
Steel strip, cold-reduced with a mass fraction of carbon over 0,25 %
|
90.93 | ISO/TC 17/SC 12 |
|
Double cold-reduced electrolytic tinplate — Part 1: Sheet
|
95.99 | ISO/TC 17 |
|
Double cold-reduced electrolytic tinplate — Part 2: Coil for subsequent cutting into sheets
|
95.99 | ISO/TC 17 |
|
Hot-rolled steel sheet of structural quality
|
95.99 | ISO/TC 17/SC 12 |
|
Hot-rolled steel sheet of structural quality
|
95.99 | ISO/TC 17/SC 12 |
|
Hot-rolled steel sheet of structural quality
|
95.99 | ISO/TC 17/SC 12 |
|
Hot-rolled steel sheet of structural quality
|
95.99 | ISO/TC 17/SC 12 |
|
Hot-rolled steel sheet of structural quality
|
95.99 | ISO/TC 17/SC 12 |
|
Hot-rolled steel sheet of structural quality
|
90.93 | ISO/TC 17/SC 12 |
|
Hot rolled steel sheet of high yield stress structural quality
|
95.99 | ISO/TC 17/SC 12 |
|
Hot-rolled steel sheet of high yield stress structural quality
|
95.99 | ISO/TC 17/SC 12 |
|
Hot-rolled steel sheet of high yield stress structural quality
|
95.99 | ISO/TC 17/SC 12 |
|
Hot-rolled steel sheet of high yield stress structural quality
|
95.99 | ISO/TC 17/SC 12 |
|
Hot-rolled steel sheet of high yield stress structural quality
|
90.20 | ISO/TC 17/SC 12 |
|
Cold-reduced steel sheet of structural quality
|
95.99 | ISO/TC 17/SC 12 |
|
Cold-reduced steel sheet of structural quality
|
95.99 | ISO/TC 17/SC 12 |
|
Cold-reduced steel sheet of structural quality
|
95.99 | ISO/TC 17/SC 12 |
|
Cold-reduced carbon steel sheet of structural quality
|
95.99 | ISO/TC 17/SC 12 |
|
Cold-reduced carbon steel sheet of structural quality
|
90.92 | ISO/TC 17/SC 12 |
|
Cold-reduced carbon steel sheet of structural quality
|
60.00 | ISO/TC 17/SC 12 |
|
Continuous hot-dip zinc-coated carbon steel sheet of structural quality
|
95.99 | ISO/TC 17/SC 12 |
|
Continuous hot-dip zinc-coated carbon steel sheet of structural quality
|
95.99 | ISO/TC 17/SC 12 |
|
Continuous hot-dip zinc-coated carbon steel sheet of structural quality
|
95.99 | ISO/TC 17/SC 12 |
|
Continuous hot-dip zinc-coated carbon steel sheet of structural quality
|
95.99 | ISO/TC 17/SC 12 |
|
Continuous hot-dip zinc-coated carbon steel sheet of structural quality
|
95.99 | ISO/TC 17/SC 12 |
|
Continuous hot-dip zinc-coated and zinc-iron alloy-coated carbon steel sheet of structural quality
|
95.99 | ISO/TC 17/SC 12 |
|
Steel sheet, zinc‐coated and zinc‐iron alloy‐coated by the continuous hot‐dip process, of structural quality
|
60.60 | ISO/TC 17/SC 12 |
|
Continuous hot-dip terne (lead alloy) coated cold reduced carbon steel sheet of commercial and drawing qualities
|
95.99 | ISO/TC 17/SC 12 |
|
Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of commercial and drawing qualities
|
95.99 | ISO/TC 17/SC 12 |
|
Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of commercial drawing and structural qualities
|
95.99 | ISO/TC 17/SC 12 |
|
Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of commercial, drawing and structural qualities
|
95.99 | ISO/TC 17/SC 12 |
|
Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of commercial, drawing and structural qualities
|
95.99 | ISO/TC 17/SC 12 |
|
Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of commercial, drawing and structural qualities
|
95.99 | ISO/TC 17/SC 12 |
|
Continuous hot-dip aluminium-silicon-coated cold-reduced carbon steel sheet of commercial and drawing qualities
|
95.99 | ISO/TC 17/SC 12 |
|
Continuous hot-dip aluminium/silicon-coated cold-reduced carbon steel sheet of commercial and drawing qualities
|
95.99 | ISO/TC 17/SC 12 |
|
Continuous hot-dip aluminium-silicon-coated cold-reduced carbon steel sheet of commercial and drawing qualities
|
95.99 | ISO/TC 17/SC 12 |
|
Continuous hot-dip aluminium-silicon-coated cold-reduced carbon steel sheet of commercial and drawing qualities
|
95.99 | ISO/TC 17/SC 12 |
|
Steel sheet, aluminium-silicon alloy-coated by the continuous hot-dip process, of commercial and drawing qualities
|
90.93 | ISO/TC 17/SC 12 |
|
Cold-reduced carbon steel sheet for vitreous enamelling
|
95.99 | ISO/TC 17/SC 12 |
|
Cold-reduced carbon steel sheet for vitreous enamelling
|
95.99 | ISO/TC 17/SC 12 |
|
Cold-reduced carbon steel sheet for vitreous enamelling
|
95.99 | ISO/TC 17/SC 12 |
|
Cold-reduced carbon steel sheet for vitreous enamelling
|
95.99 | ISO/TC 17/SC 12 |
|
Cold-reduced carbon steel sheet for vitreous enamelling
|
90.93 | ISO/TC 17/SC 12 |
|
Hot-rolled and cold-reduced electrolytic zinc-coated carbon steel sheet of commercial and drawing qualities
|
95.99 | ISO/TC 17/SC 12 |
|
Hot-rolled and cold-reduced electrolytic zinc-coated carbon steel sheet of commercial and drawing qualities
|
95.99 | ISO/TC 17/SC 12 |
|
Hot-rolled and cold-reduced electrolytic zinc-coated carbon steel sheet of commercial and drawing qualities
|
95.99 | ISO/TC 17/SC 12 |
|
Hot-rolled and cold-reduced electrolytic zinc-coated carbon steel sheet of commercial and drawing qualities
|
90.92 | ISO/TC 17/SC 12 |
|
Hot-rolled and cold-reduced electrolytic zinc-coated carbon steel sheet of commercial and drawing qualities
|
50.20 | ISO/TC 17/SC 12 |
|
Continuous electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing qualities
|
95.99 | ISO/TC 17/SC 12 |
|
Continuous electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing qualities
|
95.99 | ISO/TC 17/SC 12 |
|
Continuous electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing qualities
|
95.99 | ISO/TC 17/SC 12 |
|
Continuous electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing qualities
|
95.99 | ISO/TC 17/SC 12 |
|
Electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing qualities
|
90.93 | ISO/TC 17/SC 12 |
|
Hot-rolled steel sheet of higher yield strength with improved formability
|
95.99 | ISO/TC 17/SC 12 |
|
Hot-rolled steel sheet of higher yield strength with improved formability
|
95.99 | ISO/TC 17/SC 12 |
|
Hot-rolled steel sheet of higher yield strength with improved formability
|
95.99 | ISO/TC 17/SC 12 |
|
Hot-rolled steel sheet of higher yield strength with improved formability
|
95.99 | ISO/TC 17/SC 12 |
|
Hot-rolled steel sheet of higher yield strength with improved formability
|
90.93 | ISO/TC 17/SC 12 |
|
Continuously hot-rolled steel sheet of structural quality with improved atmospheric corrosion resistance
|
95.99 | ISO/TC 17/SC 12 |
|
Continuously hot-rolled steel sheet of structural quality with improved atmospheric corrosion resistance
|
95.99 | ISO/TC 17/SC 12 |
|
Continuously hot-rolled steel sheet of structural quality with improved atmospheric corrosion resistance
|
95.99 | ISO/TC 17/SC 12 |
|
Continuously hot-rolled steel sheet of structural quality with improved atmospheric corrosion resistance
|
95.99 | ISO/TC 17/SC 12 |
|
Steel sheet, hot-rolled, of structural quality with improved atmospheric corrosion resistance
|
90.93 | ISO/TC 17/SC 12 |
|
Cold-reduced carbon steel sheet to hardness requirements
|
95.99 | ISO/TC 17/SC 12 |
|
Cold-reduced carbon steel sheet according to hardness requirements
|
95.99 | ISO/TC 17/SC 12 |
|
Cold-reduced carbon steel sheet according to hardness requirements
|
95.99 | ISO/TC 17/SC 12 |
|
Cold-reduced carbon steel sheet according to hardness requirements
|
90.60 | ISO/TC 17/SC 12 |
|
Hot-rolled steel strip of structural quality
|
95.99 | ISO/TC 17/SC 12 |
|
Hot-rolled steel strip of structural quality
|
95.99 | ISO/TC 17/SC 12 |
|
Hot-rolled steel strip of structural quality
|
95.99 | ISO/TC 17/SC 12 |
|
Hot-rolled steel strip of structural quality
|
95.99 | ISO/TC 17/SC 12 |
|
Hot-rolled steel strip of structural quality
|
90.93 | ISO/TC 17/SC 12 |
|
Hot-rolled carbon steel strip of commercial and drawing qualities
|
95.99 | ISO/TC 17/SC 12 |
|
Hot-rolled carbon steel strip of commercial and drawing qualities
|
95.99 | ISO/TC 17/SC 12 |
|
Hot-rolled carbon steel strip of commercial and drawing qualities
|
95.99 | ISO/TC 17/SC 12 |
|
High yield strength steel plates and wide flats for cold forming — Part 1: Delivery conditions for thermomechanically-rolled steels
|
95.99 | ISO/TC 17/SC 3 |
|
High yield strength steel plates and wide flats for cold forming — Part 2: Delivery condition for normalized, normalized rolled and as-rolled steels
|
95.99 | ISO/TC 17/SC 3 |
|
High yield strength flat steel products for cold forming
|
95.99 | ISO/TC 17/SC 3 |
|
High yield strength steel plates and wide flats for cold forming — Delivery conditions
|
90.60 | ISO/TC 17/SC 3 |
|
Cold-reduced carbon steel strip with a maximum carbon content of 0,25 %
|
95.99 | ISO/TC 17/SC 12 |
|
Cold-reduced carbon steel strip with a maximum carbon content of 0,25 %
|
95.99 | ISO/TC 17/SC 12 |
|
Cold-reduced carbon steel strip with a maximum carbon content of 0,25 %
|
95.99 | ISO/TC 17/SC 12 |
|
Cold-reduced carbon steel strip with a maximum carbon content of 0,25 %
|
90.93 | ISO/TC 17/SC 12 |
|
Hot-rolled structural steel plates — Tolerances on dimensions and shape
|
95.99 | ISO/TC 17/SC 3 |
|
Hot-rolled structural steel plates — Tolerances on dimensions and shape
|
95.99 | ISO/TC 17/SC 3 |
|
Hot-rolled steel plates — Tolerances on dimensions and shape
|
90.93 | ISO/TC 17/SC 3 |
|
Steel plate with specified through-thickness characteristics
|
95.99 | ISO/TC 17/SC 3 |
|
Through-thickness characteristics for steel products
|
90.60 | ISO/TC 17/SC 3 |
|
Steel — Surface finish of hot-rolled plates and wide flats — Delivery requirements
|
95.99 | ISO/TC 17/SC 3 |
|
Steel — Surface finish of hot-rolled plates and wide flats — Delivery requirements
|
60.60 | ISO/TC 17/SC 3 |
|
Single cold-reduced electrolytic chromium/ chromium oxide-coated steel — Part 1: Sheets
|
95.99 | ISO/TC 17 |
|
Double cold-reduced electrolytic chromium/ chromium oxide-coated steel — Part 1: Sheets
|
95.99 | ISO/TC 17 |
|
Steel sheet, zinc-aluminium-magnesium alloy-coated by the continuous hot-dip process, of commercial, drawing and structural qualities
|
60.60 | ISO/TC 17/SC 12 |
|
Hot-rolled structural steel wide flats — Tolerances on dimensions and shape
|
90.93 | ISO/TC 17/SC 3 |
|
Steel plates and strips for pressure purposes — Technical delivery conditions — Part 1: General requirements
|
95.99 | ISO/TC 17/SC 10 |
|
Steel flat products for pressure purposes — Technical delivery conditions — Part 1: General requirements
|
95.99 | ISO/TC 17/SC 10 |
|
Steel flat products for pressure purposes — Technical delivery conditions — Part 1: General requirements
|
95.99 | ISO/TC 17/SC 10 |
|
Steel flat products for pressure purposes — Technical delivery conditions — Part 1: General requirements
|
90.92 | ISO/TC 17/SC 10 |
|
Steel plates and strips for pressure purposes — Technical delivery conditions — Part 2: Unalloyed and low-alloyed steels with specified room temperature and elevated temperature properties
|
95.99 | ISO/TC 17/SC 10 |
|
Steel flat products for pressure purposes — Technical delivery conditions — Part 2: Non-alloy and alloy steels with specified elevated temperature properties
|
95.99 | ISO/TC 17/SC 10 |
|
Steel flat products for pressure purposes — Technical delivery conditions — Part 2: Non-alloy and alloy steels with specified elevated temperature properties
|
95.99 | ISO/TC 17/SC 10 |
|
Steel flat products for pressure purposes — Technical delivery conditions — Part 2: Non-alloy and alloy steels with specified elevated temperature properties
|
90.92 | ISO/TC 17/SC 10 |
|
Steel plates and strips for pressure purposes — Technical delivery conditions — Part 3: Nickel-alloyed steels with specified low temperature properties
|
95.99 | ISO/TC 17/SC 10 |
|
Steel flat products for pressure purposes — Technical delivery conditions — Part 3: Weldable fine grain steels, normalized
|
95.99 | ISO/TC 17/SC 10 |
|
Steel flat products for pressure purposes — Technical delivery conditions — Part 3: Weldable fine grain steels, normalized
|
95.99 | ISO/TC 17/SC 10 |
|
Steel flat products for pressure purposes — Technical delivery conditions — Part 3: Weldable fine grain steels, normalized
|
90.60 | ISO/TC 17/SC 10 |
|
Steel plates and strips for pressure purposes — Technical delivery conditions — Part 4: Weldable fine grain steels with high proof stress supplied in the normalized or quenched and tempered condition
|
95.99 | ISO/TC 17/SC 10 |
|
Steel flat products for pressure purposes — Technical delivery conditions — Part 4: Nickel-alloy steels with specified low temperature properties
|
95.99 | ISO/TC 17/SC 10 |
|
Steel flat products for pressure purposes — Technical delivery conditions — Part 4: Nickel-alloy steels with specified low temperature properties
|
95.99 | ISO/TC 17/SC 10 |
|
Steel flat products for pressure purposes — Technical delivery conditions — Part 4: Nickel-alloy steels with specified low temperature properties
|
90.92 | ISO/TC 17/SC 10 |
|
Steel plates and strips for pressure purposes — Technical delivery conditions — Part 5: Austenitic steels
|
95.99 | ISO/TC 17/SC 10 |
|
Steel flat products for pressure purposes — Technical delivery conditions — Part 5: Weldable fine grain steels, thermomechanically rolled
|
95.99 | ISO/TC 17/SC 10 |
|
Steel flat products for pressure purposes — Technical delivery conditions — Part 5: Weldable fine grain steels, thermomechanically rolled
|
95.99 | ISO/TC 17/SC 10 |
|
Steel flat products for pressure purposes — Technical delivery conditions — Part 5: Weldable fine grain steels, thermomechanically rolled
|
90.60 | ISO/TC 17/SC 10 |
|
Steel flat products for pressure purposes — Technical delivery conditions — Part 6: Weldable fine grain steels, quenched and tempered
|
95.99 | ISO/TC 17/SC 10 |
|
Steel flat products for pressure purposes — Technical delivery conditions — Part 6: Weldable fine grain steels, quenched and tempered
|
95.99 | ISO/TC 17/SC 10 |
|
Steel flat products for pressure purposes — Technical delivery conditions — Part 6: Weldable fine grain steels, quenched and tempered
|
90.60 | ISO/TC 17/SC 10 |
|
Steel flat products for pressure purposes — Technical delivery conditions — Part 7: Stainless steels
|
95.99 | ISO/TC 17/SC 10 |
|
Steel flat products for pressure purposes — Technical delivery conditions — Part 7: Stainless steels
|
95.99 | ISO/TC 17/SC 10 |
|
Steel flat products for pressure purposes — Technical delivery conditions — Part 7: Stainless steels
|
90.92 | ISO/TC 17/SC 10 |
|
Continuous hot-dip aluminium/zinc-coated steel sheet of commercial, lock-forming and structural qualities
|
95.99 | ISO/TC 17/SC 12 |
|
Continuous hot-dip aluminium/zinc-coated steel sheet of commercial, drawing and structural qualities
|
95.99 | ISO/TC 17/SC 12 |
|
Continuous hot-dip aluminium/zinc-coated steel sheet of commercial, drawing and structural qualities
|
95.99 | ISO/TC 17/SC 12 |
|
Continuous hot-dip 55 % aluminium/zinc alloy-coated steel sheet of commercial, drawing and structural qualities
|
95.99 | ISO/TC 17/SC 12 |
|
Steel sheet, 55 % aluminium-zinc alloy-coated by the continuous hot-dip process, of commercial, drawing and structural qualities
|
90.93 | ISO/TC 17/SC 12 |
|
Continuously hot-rolled stainless steel — Tolerances on dimensions and form — Part 1: Narrow strip and cut lengths
|
90.93 | ISO/TC 17/SC 4 |
|
Continuously hot-rolled stainless steel — Tolerances on dimensions and form — Part 2: Wide strip and sheet/plate
|
90.93 | ISO/TC 17/SC 4 |
|
Hot-rolled stainless steel wide strip and sheet — Tolerances on dimensions and form
|
95.99 | ISO/TC 17/SC 4 |
|
Continuously hot-rolled stainless steel strip, plate/sheet and cut lengths — Tolerances on dimensions and form
|
95.99 | ISO/TC 17/SC 4 |
|
Continuously cold-rolled stainless steel — Tolerances on dimensions and form — Part 1: Narrow strip and cut lengths
|
90.93 | ISO/TC 17/SC 4 |
|
Continuously cold-rolled stainless steel — Tolerances on dimensions and form — Part 2: Wide strip and plate/sheet
|
90.93 | ISO/TC 17/SC 4 |
|
Cold-rolled stainless steel wide strip and sheet — Tolerances on dimensions and form
|
95.99 | ISO/TC 17/SC 4 |
|
Continuously cold-rolled stainless steel narrow strip, wide strip, plate/sheet and cut lengths — Tolerances on dimensions and form
|
95.99 | ISO/TC 17/SC 4 |
|
Hot-rolled stainless steel narrow strip — Tolerances on dimensions and form
|
95.99 | ISO/TC 17/SC 4 |
|
Cold-rolled stainless steel narrow strip — Tolerances on dimensions and form
|
95.99 | ISO/TC 17/SC 4 |
|
Textile machinery and accessories — Strip steel for dents of reeds — Part 1: Cold rolled strip steel
|
95.99 | ISO/TC 72/SC 3 |
|
Textile machinery and accessories — Strip steel for dents of reeds — Part 2: Hardened strip steel
|
95.99 | ISO/TC 72/SC 3 |
|
Textile machinery and accessories — Strip steel for dents of reeds
|
95.99 | ISO/TC 72/SC 3 |
|
Hot-rolled carbon steel sheet for machinery
|
95.99 | ISO/TC 17/SC 12 |
|
Hot-rolled carbon steel sheet as defined by chemical composition
|
95.99 | ISO/TC 17/SC 12 |
|
Hot-rolled carbon steel sheet as defined by chemical composition
|
95.99 | ISO/TC 17/SC 12 |
|
Hot-rolled carbon steel sheet as defined by chemical composition
|
90.93 | ISO/TC 17/SC 12 |
|
Hot-rolled longitudinally profiled steel plate
|
60.60 | ISO/TC 17/SC 3 |
|
Cold-reduced electrolytic tinplate
|
95.99 | ISO/TC 17/SC 9 |
|
Cold-reduced tinmill products — Electrolytic tinplate
|
90.92 | ISO/TC 17/SC 9 |
|
Cold-reduced tinmill products — Electrolytic tinplate
|
40.00 | ISO/TC 17/SC 9 |
|
Cold-reduced electrolytic chromium/chromium oxide-coated steel
|
95.99 | ISO/TC 17/SC 9 |
|
Cold-reduced tinmill products — Electrolytic chromium/chromium oxide-coated steel
|
90.92 | ISO/TC 17/SC 9 |
|
Cold-reduced tinmill products — Electrolytic chromium/chromium oxide-coated steel
|
40.00 | ISO/TC 17/SC 9 |
|
Cold-reduced blackplate in coil form for the production of tinplate or electrolytic chromium/chromium oxide-coated steel
|
95.99 | ISO/TC 17/SC 9 |
|
Cold-reduced tinmill products — Blackplate
|
90.92 | ISO/TC 17/SC 9 |
|
Cold-reduced tinmill products — Blackplate
|
40.20 | ISO/TC 17/SC 9 |
|
Cold-reduced steel sheet of higher yield strength with improved formability
|
95.99 | ISO/TC 17/SC 12 |
|
Cold-reduced steel sheet of higher yield strength with improved formability
|
95.99 | ISO/TC 17/SC 12 |
|
Cold-reduced steel sheet of higher yield strength with improved formability
|
95.99 | ISO/TC 17/SC 12 |
|
Steel sheet, cold-reduced, of higher yield strength with improved formability
|
90.93 | ISO/TC 17/SC 12 |
|
Hot-rolled steel sheet in coils of structural quality and heavy thickness
|
95.99 | ISO/TC 17/SC 12 |
|
Hot-rolled steel sheet in coils of structural quality and heavy thickness
|
95.99 | ISO/TC 17/SC 12 |
|
Hot-rolled steel sheet in coils of structural quality and heavy thickness
|
90.93 | ISO/TC 17/SC 12 |
|
Cold-reduced steel sheet of high tensile strength and low yield point with improved formability
|
95.99 | ISO/TC 17/SC 12 |
|
Cold-reduced steel sheet of high tensile strength and low yield point with improved formability
|
95.99 | ISO/TC 17/SC 12 |
|
Cold-reduced steel sheet of high tensile strength and low yield point with improved formability
|
90.93 | ISO/TC 17/SC 12 |
|
Continuous hot-dip zinc-5 %/aluminium alloy coated steel sheets and coils
|
95.99 | ISO/TC 17/SC 12 |
|
Continuous hot-dip zinc-5 % aluminium alloy coated steel sheet
|
95.99 | ISO/TC 17/SC 12 |
|
Continuous hot-dip zinc-5 % aluminium alloy coated steel sheet
|
95.99 | ISO/TC 17/SC 12 |
|
Steel sheet, zinc-5 % aluminium alloy-coated by the continuous hot-dip process, of commercial, drawing and structural qualities
|
90.93 | ISO/TC 17/SC 12 |
|
Hot-rolled twin-roll cast carbon steel sheet of commercial quality
|
95.99 | ISO/TC 17/SC 12 |
|
Hot-rolled twin-roll cast steel sheet of commercial quality
|
60.60 | ISO/TC 17/SC 12 |
|
Hot-rolled twin-roll cast steel sheet of structural quality and high strength steel
|
95.99 | ISO/TC 17/SC 12 |
|
Hot-rolled twin-roll cast steel sheet of structural quality and high strength steel
|
60.60 | ISO/TC 17/SC 12 |
|
Continuous hot-dip zinc-coated twin-roll cast steel sheet of commercial quality
|
95.99 | ISO/TC 17/SC 12 |
|
Continuous hot-dip zinc-coated twin-roll cast steel sheet of commercial quality
|
60.60 | ISO/TC 17/SC 12 |
|
Continuous hot-dip zinc-coated twin-roll cast steel sheet of structural quality and high strength steel
|
95.99 | ISO/TC 17/SC 12 |
|
Steel sheet, twin-roll cast, zinc-coated by the continuous hot-dip process, of structural quality and high strength
|
60.60 | ISO/TC 17/SC 12 |
|
Continuous mill flat rolled products — Guidelines for improved ordering communication
|
95.99 | ISO/TC 17/SC 12 |
|
Continuously hot-rolled steel sheet products — Dimensional and shape tolerances
|
95.99 | ISO/TC 17/SC 12 |
|
Continuously hot-rolled steel sheet products — Dimensional and shape tolerances
|
95.99 | ISO/TC 17/SC 12 |
|
Continuously hot-rolled steel sheet products — Dimensional and shape tolerances
|
95.99 | ISO/TC 17/SC 12 |
|
Hot-rolled steel sheet products — Dimensional and shape tolerances
|
90.93 | ISO/TC 17/SC 12 |
|
Continuously cold-rolled steel sheet products — Dimensional and shape tolerances
|
95.99 | ISO/TC 17/SC 12 |
|
Continuously cold-rolled steel sheet products — Dimensional and shape tolerances
|
95.99 | ISO/TC 17/SC 12 |
|
Continuously cold-rolled steel sheet products — Dimensional and shape tolerances
|
95.99 | ISO/TC 17/SC 12 |
|
Cold-rolled steel sheet products — Dimensional and shape tolerances
|
90.93 | ISO/TC 17/SC 12 |
|
Continuously hot-dipped coated steel sheet products — Dimensional and shape tolerances
|
95.99 | ISO/TC 17/SC 12 |
|
Continuously hot-dipped coated steel sheet products — Dimensional and shape tolerances
|
95.99 | ISO/TC 17/SC 12 |
|
Continuously hot-dipped coated steel sheet products — Dimensional and shape tolerances
|
95.99 | ISO/TC 17/SC 12 |
|
Continuously hot-dipped coated steel sheet products — Dimensional and shape tolerances
|
90.93 | ISO/TC 17/SC 12 |
|
Continuous hot-dip metallic-coated steel sheet for corrugated steel pipe
|
95.99 | ISO/TC 17/SC 12 |
|
Continuous hot-dip metallic-coated steel sheet for corrugated steel pipe
|
95.99 | ISO/TC 17/SC 12 |
|
Steel sheet, metallic-coated by the continuous hot-dip process for corrugated steel pipe
|
90.93 | ISO/TC 17/SC 12 |
|
Steel — Ultrasonic testing for steel flat products of thickness equal to or greater than 6 mm
|
95.99 | ISO/TC 17/SC 7 |
|
Steel — Ultrasonic testing of steel flat products of thickness equal to or greater than 6 mm
|
90.93 | ISO/TC 17/SC 7 |
|
Hot-rolled stainless steel plates — Tolerances on dimensions and shape
|
95.99 | ISO/TC 17/SC 4 |
|
Hot-rolled stainless steel plates — Tolerances on dimensions and shape
|
90.93 | ISO/TC 17/SC 4 |
|
Hot-rolled steel sheet in coils of higher yield strength with improved formability and heavy thickness for cold forming
|
95.99 | ISO/TC 17/SC 12 |
|
Hot-rolled steel sheet in coils of higher yield strength with improved formability and heavy thickness for cold forming
|
95.99 | ISO/TC 17/SC 12 |
|
Hot-rolled steel sheet in coils of higher yield strength with improved formability and heavy thickness for cold forming
|
90.92 | ISO/TC 17/SC 12 |
No matching records found. Please try changing the filter settings.