Filtrar :
Norma o proyecto | Etapa | TC |
---|---|---|
Rotating tools with parallel shanks — Diameters of shanks and sizes of driving squares
|
90.60 | ISO/TC 29/SC 9 |
Application of carbides for machining by chip removal — Designation of the main groups of chip removal and groups of application
|
95.99 | ISO/TC 29/SC 9 |
Application of hard cutting materials for machining by chip removal — Designation of the main groups of chip removal and groups of application
|
95.99 | ISO/TC 29/SC 9 |
Application of hard cutting materials for machining by chip removal — Designation of the main groups of chip removal and groups of application — Technical Corrigendum 1
|
95.99 | ISO/TC 29/SC 9 |
Classification and application of hard cutting materials for metal removal with defined cutting edges — Designation of the main groups and groups of application
|
95.99 | ISO/TC 29/SC 9 |
Classification and application of hard cutting materials for metal removal with defined cutting edges — Designation of the main groups and groups of application
|
90.60 | ISO/TC 29/SC 9 |
Withdrawal of ISO/R 524-1966
|
95.99 | ISO/TC 29 |
Short machine taps and hand taps — Amendment 1
|
95.99 | ISO/TC 29 |
Indexable (throwaway) carbide inserts without fixation hole — Dimensions
|
95.99 | ISO/TC 29 |
Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole — Dimensions
|
95.99 | ISO/TC 29/SC 9 |
Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole — Dimensions
|
90.60 | ISO/TC 29/SC 9 |
Indexable inserts for cutting tools — Designation
|
95.99 | ISO/TC 29/SC 9 |
Indexable inserts for cutting tools — Designation
|
95.99 | ISO/TC 29/SC 9 |
Indexable inserts for cutting tools — Designation — Amendment 1: Tolerance on d and m of V-shape inserts
|
95.99 | ISO/TC 29/SC 9 |
Indexable inserts for cutting tools — Designation
|
95.99 | ISO/TC 29/SC 9 |
Indexable inserts for cutting tools — Designation — Technical Corrigendum 1
|
95.99 | ISO/TC 29/SC 9 |
Indexable inserts for cutting tools — Designation
|
95.99 | ISO/TC 29/SC 9 |
Indexable inserts for cutting tools — Designation
|
90.93 | ISO/TC 29/SC 9 |
Tool shanks and equipment with 7/24 tapers — Collar dimensions
|
95.99 | ISO/TC 29 |
Basic quantities in cutting and grinding — Part 1: Geometry of the active part of cutting tools — General terms, reference systems, tool and working angles, chip breakers
|
90.93 | ISO/TC 29 |
Basic quantities in cutting and grinding — Part 1: Geometry of the active part of cutting tools — General terms, reference systems, tool and working angles, chip breakers — Amendment 1
|
60.60 | ISO/TC 29 |
Basic quantities in cutting and grinding — Part 2: Geometry of the active part of cutting tools — General conversion formulae to relate tool and working angles
|
90.93 | ISO/TC 29 |
Basic quantities in cutting and grinding — Part 3: Geometric and kinematic quantities in cutting
|
90.93 | ISO/TC 29 |
Basic quantities in cutting and grinding — Part 4: Forces, energy, power
|
90.93 | ISO/TC 29 |
Basic quantities in cutting and grinding — Part 5: Basic terminology for grinding processes using grinding wheels
|
90.93 | ISO/TC 29 |
Single point cutting tools — Corner radii
|
95.99 | ISO/TC 29/SC 9 |
Single point cutting tools — Corner radii
|
90.93 | ISO/TC 29/SC 9 |
Indexable (throwaway) carbide inserts with cylindrical fixation hole — Dimensions
|
95.99 | ISO/TC 29 |
Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole — Dimensions
|
95.99 | ISO/TC 29/SC 9 |
Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole — Dimensions
|
95.99 | ISO/TC 29/SC 9 |
Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole — Dimensions
|
95.99 | ISO/TC 29/SC 9 |
Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole — Dimensions
|
90.93 | ISO/TC 29/SC 9 |
Indexable (throwaway) carbide inserts for milling cutters — Dimensions — Part 1: Square inserts
|
95.99 | ISO/TC 29 |
Indexable (throwaway) hardmetal inserts for milling cutters — Dimensions — Part 2: Triangular inserts
|
95.99 | ISO/TC 29 |
Indexable hardmetal (carbide) inserts with wiper edges, without fixing hole — Dimensions
|
95.99 | ISO/TC 29/SC 9 |
Indexable hardmetal (carbide) inserts with wiper edges, without fixing hole — Dimensions
|
90.60 | ISO/TC 29/SC 9 |
Parallel shank tools — Driving tenons and sockets — Dimensions
|
95.99 | ISO/TC 29/SC 9 |
Tool holders with rectangular shank for indexable inserts — Part 1: General survey, correlation and determination of dimensions
|
95.99 | ISO/TC 29/SC 9 |
Tool holders with rectangular shank for indexable inserts — Part 1: General survey, correlation and determination of dimensions
|
90.93 | ISO/TC 29/SC 9 |
Tool holders with rectangular shank for indexable inserts — Part 2: Style A
|
95.99 | ISO/TC 29/SC 9 |
Tool holders with rectangular shank for indexable inserts — Part 2: Style A
|
90.93 | ISO/TC 29/SC 9 |
Tool holders with rectangular shank for indexable inserts — Part 3: Style B
|
95.99 | ISO/TC 29/SC 9 |
Tool holders with rectangular shank for indexable inserts — Part 3: Style B
|
90.93 | ISO/TC 29/SC 9 |
Tool holders with rectangular shank for indexable inserts — Part 4: Style D
|
95.99 | ISO/TC 29/SC 9 |
Tool holders with rectangular shank for indexable inserts — Part 4: Style D
|
90.93 | ISO/TC 29/SC 9 |
Tool holders with rectangular shank for indexable inserts — Part 5: Style F
|
95.99 | ISO/TC 29/SC 9 |
Tool holders with rectangular shank for indexable inserts — Part 5: Style F
|
90.93 | ISO/TC 29/SC 9 |
Tool holders with rectangular shank for indexable inserts — Part 6: Style G
|
95.99 | ISO/TC 29/SC 9 |
Tool holders with rectangular shank for indexable inserts — Part 6: Style G
|
90.93 | ISO/TC 29/SC 9 |
Tool holders with rectangular shank for indexable inserts — Part 7: Style J
|
95.99 | ISO/TC 29/SC 9 |
Tool holders with rectangular shank for indexable inserts — Part 7: Style J
|
90.93 | ISO/TC 29/SC 9 |
Tool holders with rectangular shank for indexable inserts — Part 8: Style K
|
95.99 | ISO/TC 29/SC 9 |
Tool holders with rectangular shank for indexable inserts — Part 8: Style K
|
90.93 | ISO/TC 29/SC 9 |
Tool holders with rectangular shank for indexable inserts — Part 9: Style L
|
95.99 | ISO/TC 29/SC 9 |
Tool holders with rectangular shank for indexable inserts — Part 9: Style L
|
90.93 | ISO/TC 29/SC 9 |
Tool holders with rectangular shank for indexable inserts — Part 10: Style N
|
95.99 | ISO/TC 29/SC 9 |
Tool holders with rectangular shank for indexable inserts — Part 10: Style N
|
90.93 | ISO/TC 29/SC 9 |
Tool holders with rectangular shank for indexable inserts — Part 11: Style R
|
95.99 | ISO/TC 29/SC 9 |
Tool holders with rectangular shank for indexable inserts — Part 11: Style R
|
90.93 | ISO/TC 29/SC 9 |
Tool holders with rectangular shank for indexable inserts — Part 12: Style S
|
95.99 | ISO/TC 29/SC 9 |
Tool holders with rectangular shank for indexable inserts — Part 12: Style S
|
90.93 | ISO/TC 29/SC 9 |
Tool holders with rectangular shank for indexable inserts — Part 13: Style T
|
95.99 | ISO/TC 29/SC 9 |
Tool holders with rectangular shank for indexable inserts — Part 13: Style T
|
90.93 | ISO/TC 29/SC 9 |
Tool holders with rectangular shank for indexable inserts — Part 14: Style H
|
95.99 | ISO/TC 29/SC 9 |
Tool holders with rectangular shank for indexable inserts — Part 14: Style H
|
90.93 | ISO/TC 29/SC 9 |
Tool holders with rectangular shank for indexable inserts — Part 15: Style V
|
95.99 | ISO/TC 29/SC 9 |
Tool holders with rectangular shank for indexable inserts — Part 15: Style V
|
90.93 | ISO/TC 29/SC 9 |
Cartridges, type A, for indexable inserts — Part 1: General survey, correlation and determination of dimensions
|
90.60 | ISO/TC 29/SC 9 |
Cartridges, type A, for indexable inserts — Part 2: Style F
|
90.60 | ISO/TC 29/SC 9 |
Cartridges, type A, for indexable inserts — Part 3: Style G
|
90.60 | ISO/TC 29/SC 9 |
Cartridges, type A, for indexable inserts — Part 4: Style J
|
90.60 | ISO/TC 29/SC 9 |
Cartridges, type A, for indexable inserts — Part 5: Style K
|
90.60 | ISO/TC 29/SC 9 |
Cartridges, type A, for indexable inserts — Part 6: Style L
|
90.60 | ISO/TC 29/SC 9 |
Cartridges, type A, for indexable inserts — Part 7: Style R
|
90.60 | ISO/TC 29/SC 9 |
Cartridges, type A, for indexable inserts — Part 8: Style S
|
90.60 | ISO/TC 29/SC 9 |
Cartridges, type A, for indexable inserts — Part 9: Style T
|
90.60 | ISO/TC 29/SC 9 |
Cartridges, type A, for indexable inserts — Part 10: Style U
|
90.60 | ISO/TC 29/SC 9 |
Cartridges, type A, for indexable inserts — Part 11: Style W
|
90.60 | ISO/TC 29/SC 9 |
Cartridges, type A, for indexable inserts — Part 12: Style Y
|
90.60 | ISO/TC 29/SC 9 |
Cartridges, type A, for indexable inserts — Dimensions
|
95.99 | ISO/TC 29 |
Cartridges, type A, for indexable inserts — Dimensions — Addendum 1
|
95.99 | ISO/TC 29/SC 9 |
Cartridges, type A, for indexable inserts — Dimensions
|
95.99 | ISO/TC 29/SC 9 |
Indexable hardmetal (carbide) inserts with rounded corners, with partly cylindrical fixing hole — Part 1: Dimensions of inserts with 7 degrees normal clearance
|
95.99 | ISO/TC 29/SC 9 |
Indexable inserts for cutting tools — Hardmetal (carbide) inserts with rounded corners, with partly cylindrical fixing hole — Part 2: Dimensions of inserts with 11 degrees normal clearance
|
95.99 | ISO/TC 29/SC 9 |
Indexable inserts for cutting tools — Hardmetal (carbide) inserts with rounded corners, with partly cylindrical fixing hole — Part 3: V-shape inserts
|
95.99 | ISO/TC 29/SC 9 |
Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole — Dimensions
|
95.99 | ISO/TC 29/SC 9 |
Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole — Dimensions
|
90.60 | ISO/TC 29/SC 9 |
Indexable inserts for cutting tools — Ceramic inserts with rounded corners — Part 1: Dimensions of inserts without fixing hole
|
95.99 | ISO/TC 29/SC 9 |
Indexable inserts for cutting tools — Ceramic inserts with rounded corners — Part 1: Dimensions of inserts without fixing hole
|
90.20 | ISO/TC 29/SC 9 |
Indexable inserts for cutting tools — Ceramic inserts with rounded corners — Part 2: Dimensions of inserts with cylindrical fixing hole
|
95.99 | ISO/TC 29/SC 9 |
Indexable inserts for cutting tools — Ceramic inserts with rounded corners — Part 2: Dimensions of inserts with cylindrical fixing hole
|
90.93 | ISO/TC 29/SC 9 |
Dimensions of accessories for cutter arbors with parallel key and tenon drive
|
90.93 | ISO/TC 29/SC 9 |
Classification and designation of approximate chip control zones for indexable inserts with chipbreakers
|
90.93 | ISO/TC 29/SC 9 |
Cutting tools — Designation of high-speed steel groups
|
95.99 | ISO/TC 29/SC 9 |
Cutting tools — Designation of high-speed steel groups
|
90.93 | ISO/TC 29/SC 9 |
Applicability of hard cutting materials for machining by chip removal — Information additional to ISO 513 designation
|
95.99 | ISO/TC 29/SC 9 |
Cutting tool data representation and exchange — Part 1: Overview, fundamental principles and general information model
|
90.93 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 1: Overview, fundamental principles and general information model — Amendment 1
|
60.60 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 1: Overview, fundamental principles and general information model — Technical Corrigendum 1
|
60.60 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 1: Overview, fundamental principles and general information model — Technical Corrigendum 2
|
60.60 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 2: Reference dictionary for the cutting items
|
95.99 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 2: Reference dictionary for the cutting items — Technical Corrigendum 1
|
95.99 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 2: Reference dictionary for the cutting items
|
95.99 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 2: Reference dictionary for the cutting items
|
90.20 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 3: Reference dictionary for tool items
|
95.99 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 3: Reference dictionary for tool items — Technical Corrigendum 1
|
95.99 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 3: Reference dictionary for tool items
|
95.99 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 3: Reference dictionary for tool items
|
90.20 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 4: Reference dictionary for adaptive items
|
95.99 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 4: Reference dictionary for adaptive items — Technical Corrigendum 1
|
95.99 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 4: Reference dictionary for adaptive items
|
95.99 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 4: Reference dictionary for adaptive items
|
90.20 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 5: Reference dictionary for assembly items
|
95.99 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 5: Reference dictionary for assembly items — Technical Corrigendum 1
|
95.99 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 5: Reference dictionary for assembly items
|
90.93 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 50: Reference dictionary for reference systems and common concepts
|
95.99 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 50: Reference dictionary for reference systems and common concepts — Technical Corrigendum 1
|
95.99 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 50: Reference dictionary for reference systems and common concepts
|
90.93 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 60: Reference dictionary for connection systems
|
95.99 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 60: Reference dictionary for connection systems — Technical Corrigendum 1
|
95.99 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 60: Reference dictionary for connection systems
|
90.60 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 70: Graphical data layout — Layer setting for tool layout
|
90.93 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 71: Graphical data layout — Creation of documents for standardized data exchange: Graphical product information
|
90.93 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 72: Creation of documents for the standardized data exchange — Definition of properties for drawing header and their XML-data exchange
|
90.93 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 80: Creation and exchange of 3D models — Overview and principles
|
95.99 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 80: Creation and exchange of 3D models — Overview and principles
|
90.93 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 100: Definitions, principles and methods for reference dictionaries
|
95.99 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 100: Definitions, principles and methods for reference dictionaries
|
90.93 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 100: Definitions, principles and methods for reference dictionaries — Technical Corrigendum 1
|
60.60 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 150: Usage guidelines
|
90.93 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 201: Creation and exchange of 3D models — Regular inserts
|
90.60 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 202: Creation and exchange of 3D models — Irregular inserts
|
90.93 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 203: Creation and exchange of 3D models — Replaceable inserts for drilling
|
90.93 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 204: Creation and exchange of 3D models — Inserts for reaming
|
90.93 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 301: Concept for the design of 3D models based on properties according to ISO/TS 13399-3: Modelling of thread-cutting taps, thread-forming taps and thread-cutting dies
|
90.93 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 302: Concept for the design of 3D models based on properties according to ISO/TS 13399-3: Modelling of solid drills and countersinking tools
|
90.93 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 303: Creation and exchange of 3D models — Solid end mills
|
90.93 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 304: Creation and exchange of 3D models — Solid milling cutters with arbor hole
|
90.93 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 305: Creation and exchange of 3D models — Modular tooling systems with adjustable cartridges for boring
|
90.93 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 306: Creation and exchange of 3D models — Drills and countersinking tools for indexable inserts
|
90.20 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 307: Creation and exchange of 3D models — End mills for indexable inserts
|
90.93 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 308: Creation and exchange of 3D models — Milling cutters with arbor hole for indexable inserts
|
90.93 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 309: Creation and exchange of 3D models — Tool holders for indexable inserts
|
90.93 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 310: Creation and exchange of 3D models — Turning tools with carbide tips
|
90.93 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 311: Creation and exchange of 3D models — Solid reamers
|
90.93 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 312: Creation and exchange of 3D models — Reamers for indexable inserts
|
90.93 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 313: Creation and exchange of 3D models — Burrs
|
90.93 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 314: Creation and exchange of 3D models — Cartridges for indexable inserts
|
90.20 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 315: Creation and exchange of 3D models — Modelling of machine operated feed out tools
|
90.93 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 401: Creation and exchange of 3D models — Converting, extending and reducing adaptive items
|
90.93 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 403: Creation and exchange of 3D models — Modelling of driven tool units
|
90.93 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 405: Creation and exchange of 3D models — Collets
|
90.93 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 406: Creation and exchange of 3D models — Modelling of connection interface
|
90.93 | ISO/TC 29 |
Balancing of rotating tools and tool systems
|
90.93 | ISO/TC 29 |
Cubic boron nitride inserts, tipped or solid — Dimensions, types
|
95.99 | ISO/TC 29/SC 9 |
Cubic boron nitride inserts, tipped or solid — Dimensions, types
|
90.60 | ISO/TC 29/SC 9 |
Polycristalline diamond inserts, tipped — Dimensions, types
|
95.99 | ISO/TC 29/SC 9 |
Polycristalline diamond inserts, tipped — Dimensions, types
|
90.60 | ISO/TC 29/SC 9 |
CVD diamond tools — Categorization
|
90.60 | ISO/TC 29/SC 9 |
No se ha encontrado ningún registro que coincida. Pruebe a cambiar los ajustes de filtro.