Filtrar :
Norma o proyecto | Etapa | TC |
---|---|---|
Road vehicles — Passenger car wheels — Test method
|
95.99 | ISO/TC 22 |
Passenger car road wheels — Test methods
|
95.99 | ISO/TC 22 |
Road vehicles — Passenger car wheels for road use — Test methods
|
95.99 | ISO/TC 22/SC 33 |
Road vehicles — Passenger car wheels for road use — Test methods
|
90.93 | ISO/TC 22/SC 33 |
Road vehicles — Trucks — Wheels/rims — Test methods
|
95.99 | ISO/TC 22 |
Commercial vehicles — Wheels/rims — Test methods
|
95.99 | ISO/TC 22 |
Road vehicles — Wheels/rims for commercial vehicles — Test methods
|
95.99 | ISO/TC 22/SC 33 |
Road vehicles — Wheels/rims for commercial vehicles — Test methods
|
95.99 | ISO/TC 22/SC 33 |
Road vehicles — Wheels/rims for commercial vehicles — Test methods
|
60.60 | ISO/TC 22/SC 33 |
Wheels/rims — Nomenclature, designation, marking, and units of measurement
|
95.99 | ISO/TC 22 |
Wheels and rims for pneumatic tyres — Vocabulary, designation and marking
|
95.99 | ISO/TC 22 |
Wheels and rims for pneumatic tyres — Vocabulary, designation and marking
|
95.99 | ISO/TC 22/SC 33 |
Wheels and rims for pneumatic tyres — Vocabulary, designation and marking
|
60.60 | ISO/TC 22/SC 33 |
Passenger car tyres and rims — Part 2: Rims
|
95.99 | ISO/TC 31/SC 3 |
Passenger car tyres and rims — Part 2: Rims
|
95.99 | ISO/TC 31/SC 3 |
Passenger car tyres and rims — Part 2: Rims
|
95.99 | ISO/TC 31/SC 3 |
Passenger car tyres and rims — Part 2: Rims
|
95.99 | ISO/TC 31/SC 3 |
Passenger car tyres and rims — Part 2: Rims
|
95.99 | ISO/TC 31/SC 3 |
Passenger car tyres and rims — Part 2: Rims
|
60.60 | ISO/TC 31/SC 3 |
Road vehicles — Wheels for commercial vehicles — Dimensional characteristics of attachment on hub
|
95.99 | ISO/TC 22 |
Commercial vehicles — Wheel hub attachment dimensions
|
95.99 | ISO/TC 22 |
Commercial vehicles — Wheel hub attachment dimensions
|
95.99 | ISO/TC 22 |
Commercial vehicles — Wheel-hub attachment dimensions
|
95.99 | ISO/TC 22/SC 33 |
Commercial vehicles — Wheel-hub attachment dimensions
|
60.60 | ISO/TC 22/SC 33 |
Truck and bus tyres and rims (metric series) — Part 2: Rims
|
95.99 | ISO/TC 31/SC 4 |
Truck and bus tyres and rims (metric series) — Part 2: Rims
|
95.99 | ISO/TC 31/SC 4 |
Truck and bus tyres and rims (metric series) — Part 2: Rims
|
95.99 | ISO/TC 31/SC 4 |
Truck and bus tyres and rims (metric series) — Part 2: Rims
|
95.99 | ISO/TC 31/SC 4 |
Truck and bus tyres and rims (metric series) — Part 2: Rims
|
60.60 | ISO/TC 31/SC 4 |
Road vehicles — Wheels — Impact test procedure
|
95.99 | ISO/TC 22 |
Road vehicles — Wheels — Impact test procedure — Technical Corrigendum 1
|
95.99 | ISO/TC 22 |
Passenger cars — Light alloy wheels — Impact test
|
95.99 | ISO/TC 22 |
Road vehicles — Light alloy wheels — Impact test
|
95.99 | ISO/TC 22/SC 33 |
Road vehicles — Light alloy wheels — Lateral impact test
|
60.60 | ISO/TC 22/SC 33 |
Commercial road vehicles — Flat attachment wheel fixing nuts
|
90.60 | ISO/TC 22/SC 33 |
Commercial vehicles and buses — Gearbox flanges — Type A
|
90.93 | ISO/TC 22/SC 40 |
Commercial vehicles and buses — Gearbox flanges — Type S
|
90.93 | ISO/TC 22/SC 40 |
Clutch housings for reciprocating internal combustion engines — Nominal dimensions and tolerances
|
90.93 | ISO/TC 22/SC 40 |
Road vehicles — Commercial vehicles — Couplings between power take-offs (PTO) and ancillary driven units
|
90.93 | ISO/TC 22/SC 40 |
Road vehicles — Commercial vehicles — Clearance envelope for power take-offs (PTO)
|
95.99 | ISO/TC 22 |
Commercial road vehicles — Connections for rear-mounted power take-offs (PTO)
|
90.93 | ISO/TC 22/SC 40 |
Commercial road vehicles — Steering ball joints
|
90.93 | ISO/TC 22/SC 40 |
Commercial road vehicles — Side openings for truck power take-offs
|
90.93 | ISO/TC 22/SC 40 |
Road Vehicles – Control type and layout of transmission gear shifters and drive mode selectors
|
30.99 | ISO/TC 22/SC 39 |
Commercial vehicles and buses — Cross-tooth gearbox flanges, type T
|
95.99 | ISO/TC 22 |
Commercial vehicles and buses — Cross-tooth gearbox flanges, type T
|
90.93 | ISO/TC 22/SC 40 |
Commercial road vehicles — Flat attachment fixing nuts — Test methods
|
95.99 | ISO/TC 22 |
Road vehicles — Flat attachment fixing nuts for commercial vehicles — Test methods
|
95.99 | ISO/TC 22 |
Road vehicles — Flat attachment fixing nuts for commercial vehicles — Test methods
|
90.93 | ISO/TC 22/SC 33 |
Rubber hoses and hose assemblies for automobile power-steering systems — Specification
|
95.99 | ISO/TC 45/SC 1 |
Rubber hoses and hose assemblies for automobile power-steering systems — Specification
|
90.93 | ISO/TC 45/SC 1 |
Road vehicles — Gearshift patterns — Manual transmissions with power-assisted gearchange and automatic transmissions with manual-gearshift mode
|
95.99 | ISO/TC 22 |
Commercial vehicles and buses — Cross-tooth propeller shaft flanges, type T
|
90.93 | ISO/TC 22/SC 40 |
Passenger vehicle wheels — Clip balance weight and rim flange nomenclature, test procedures and performance requirements
|
95.99 | ISO/TC 22/SC 33 |
Passenger car and light truck vehicle wheels — Clip and adhesive balance weight and rim flange nomenclature, test procedures and performance requirements
|
60.60 | ISO/TC 22/SC 33 |
Road vehicles — Wheels and rims — Use, general maintenance and safety requirements and out-of-service conditions
|
95.99 | ISO/TC 22/SC 33 |
Road vehicles — Wheels and rims — Use, general maintenance and safety requirements and out-of-service conditions
|
60.60 | ISO/TC 22/SC 33 |
Road vehicles — Wheels — Nut seat strength tests
|
90.60 | ISO/TC 22/SC 33 |
Road vehicles — Wheels — Measurement of radial and lateral run-out
|
90.93 | ISO/TC 22/SC 33 |
No se ha encontrado ningún registro que coincida. Pruebe a cambiar los ajustes de filtro.