Filtrar :
Norma o proyecto | Etapa | TC |
---|---|---|
Plastics — Determination of water absorption
|
95.99 | ISO/TC 61/SC 6 |
Plastics — Determination of water absorption
|
95.99 | ISO/TC 61/SC 6 |
Plastics — Determination of water absorption
|
90.93 | ISO/TC 61/SC 6 |
Plastics — Determination of temperature of deflection under load — Part 1: General test method
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Determination of temperature of deflection under load — Part 1: General test method
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Determination of temperature of deflection under load — Part 1: General test method
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Determination of temperature of deflection under load — Part 1: General test method
|
60.60 | ISO/TC 61/SC 2 |
Plastics and ebonite — Determination of temperature of deflection under load
|
95.99 | ISO/TC 61 |
Withdrawal of ISO/R 117-1959
|
95.99 | ISO/TC 61 |
Withdrawal of ISO 118-1976
|
95.99 | ISO/TC 61 |
Plastics — Determination of bulk factor of moulding materials
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of bulk factor of moulding materials
|
60.60 | ISO/TC 61/SC 5 |
Withdrawal of ISO/R 173-1961
|
95.99 | ISO/TC 61 |
Plastics — Determination of the effects of liquid chemicals, including water
|
95.99 | ISO/TC 61/SC 6 |
Plastics — Methods of test for the determination of the effects of immersion in liquid chemicals
|
95.99 | ISO/TC 61/SC 6 |
Plastics — Methods of test for the determination of the effects of immersion in liquid chemicals
|
90.93 | ISO/TC 61/SC 6 |
Plastics — Determination of loss of plasticizers — Activated carbon method
|
95.99 | ISO/TC 61/SC 6 |
Plastics — Determination of loss of plasticizers — Activated carbon method
|
90.93 | ISO/TC 61/SC 6 |
Plastics — Determination of migration of plasticizers
|
95.99 | ISO/TC 61 |
Plastics — Determination of migration of plasticizers
|
95.99 | ISO/TC 61/SC 6 |
Plastics — Determination of migration of plasticizers
|
90.93 | ISO/TC 61/SC 6 |
Plastics — Determination of flexural properties of rigid plastics
|
95.99 | ISO/TC 61 |
Plastics — Determination of flexural properties
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Determination of flexural properties
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Determination of flexural properties — Amendment 1: Precision statement
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Determination of flexural properties
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Determination of flexural properties — Amendment 1
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Determination of flexural properties
|
90.60 | ISO/TC 61/SC 2 |
Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test — Amendment 1
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test
|
60.60 | ISO/TC 61/SC 2 |
Plastics — Determination of Charpy impact properties — Part 2: Instrumented impact test
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Determination of Charpy impact properties — Part 2: Instrumented impact test — Amendment 1: Precision data
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Determination of Charpy impact properties — Part 2: Instrumented impact test — Technical Corrigendum 1
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Determination of Charpy impact properties — Part 2: Instrumented impact test
|
60.60 | ISO/TC 61/SC 2 |
Plastics — Determination of Charpy impact strength of rigid materials
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Determination of Charpy impact strength
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Determination of Charpy impact strength — Technical Corrigendum 1
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Determination of Izod impact strength of rigid materials
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Determination of Izod impact strength
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Determination of Izod impact strength — Technical Corrigendum 1
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Determination of Izod impact strength
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Determination of Izod impact strength — Amendment 1
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Determination of Izod impact strength — Amendment 2: Precision data
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Determination of Izod impact strength
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Determination of Izod impact strength
|
60.60 | ISO/TC 61/SC 2 |
Plastics — Determination of flammability characteristics of rigid plastics in the form of small specimens in contact with an incandescent rod
|
95.99 | ISO/TC 61/SC 4 |
Plastics — Qualitative evaluation of the bleeding of colorants
|
95.99 | ISO/TC 61/SC 9 |
Plastics — List of equivalent terms
|
95.99 | ISO/TC 61 |
Plastics — List of equivalent terms — Addendum 1
|
95.99 | ISO/TC 61/SC 1 |
Plastics — List of equivalent terms — Addendum 2
|
95.99 | ISO/TC 61/SC 1 |
Plastics — List of equivalent terms — Addendum 4
|
95.99 | ISO/TC 61 |
Plastics — List of equivalent terms — Addendum 5
|
95.99 | ISO/TC 61/SC 1 |
Plastics — Standard atmospheres for conditioning and testing
|
95.99 | ISO/TC 61/SC 6 |
Plastics — Standard atmospheres for conditioning and testing
|
95.99 | ISO/TC 61/SC 6 |
Plastics — Standard atmospheres for conditioning and testing — Technical Corrigendum 1
|
95.99 | ISO/TC 61/SC 6 |
Plastics — Standard atmospheres for conditioning and testing
|
95.99 | ISO/TC 61/SC 6 |
Plastics — Standard atmospheres for conditioning and testing
|
90.93 | ISO/TC 61/SC 6 |
Withdrawal of ISO/R 292-1967
|
95.99 | ISO/TC 61 |
Plastics — Determination of stiffness in torsion of flexible materials — Part 1: General method
|
90.93 | ISO/TC 61/SC 2 |
Plastics — Determination of stiffness in torsion as a function of temperature
|
95.99 | ISO/TC 61/SC 2 |
Withdrawal of ISO/R 462-1965
|
95.99 | ISO/TC 61 |
Plastics — Vocabulary
|
95.99 | ISO/TC 61/SC 1 |
Plastics — Vocabulary — Addendum 1
|
95.99 | ISO/TC 61/SC 1 |
Plastics — Vocabulary — Addendum 2
|
95.99 | ISO/TC 61/SC 1 |
Plastics — Vocabulary — Addendum 3
|
95.99 | ISO/TC 61/SC 1 |
Plastics — Vocabulary
|
95.99 | ISO/TC 61/SC 1 |
Plastics — Vocabulary — Amendment 1: Terms relating to individual macromolecules, their assemblies, dilute polymer solutions and crystalline polymers
|
95.99 | ISO/TC 61/SC 1 |
Plastics — Vocabulary — Amendment 3: General terms and terms relating to degradable plastics
|
95.99 | ISO/TC 61/SC 1 |
Plastics — Vocabulary — Amendment 4: Basic terms in polymer science
|
95.99 | ISO/TC 61/SC 1 |
Plastics — Vocabulary — Amendment 5: Terms relating to carbon fibre
|
95.99 | ISO/TC 61/SC 1 |
Plastics — Vocabulary
|
95.99 | ISO/TC 61/SC 1 |
Plastics — Vocabulary
|
90.93 | ISO/TC 61/SC 1 |
Plastics — Vocabulary — Amendment 1: Additional items
|
60.60 | ISO/TC 61/SC 1 |
Plastics — Determination of the refractive index of transparent plastics
|
95.99 | ISO/TC 61 |
Plastics — Determination of refractive index
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of refractive index
|
60.60 | ISO/TC 61/SC 5 |
Plastics — Determination of tensile properties — Part 1: General principles
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Determination of tensile properties — Part 1: General principles — Amendment 1: Details of extensometer
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Determination of tensile properties — Part 1: General principles — Technical Corrigendum 1
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Determination of tensile properties — Part 1: General principles
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Determination of tensile properties — Part 1: General principles
|
90.20 | ISO/TC 61/SC 2 |
Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics — Technical Corrigendum 1
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
|
90.92 | ISO/TC 61/SC 2 |
Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
|
40.20 | ISO/TC 61/SC 2 |
Plastics — Determination of tensile properties
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Testing with the torsion pendulum
|
95.99 | ISO/TC 61 |
Withdrawal of ISO/R 600-1967
|
95.99 | ISO/TC 61 |
Plastics — Determination of compressive properties
|
95.99 | ISO/TC 61 |
Plastics — Determination of compressive properties
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Determination of compressive properties
|
90.93 | ISO/TC 61/SC 2 |
Plastics — Determination of behaviour under the action of fungi and bacteria — Evaluation by visual examination or measurement of change in mass or physical properties
|
95.99 | ISO/TC 61/SC 6 |
Plastics — Evaluation of the action of microorganisms
|
95.99 | ISO/TC 61/SC 6 |
Plastics — Evaluation of the action of microorganisms
|
90.93 | ISO/TC 61/SC 6 |
Plastics — Determination of indentation hardness by means of a durometer (Shore hardness)
|
95.99 | ISO/TC 61 |
Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness)
|
95.99 | ISO/TC 61/SC 2 |
Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness)
|
90.60 | ISO/TC 61/SC 2 |
Withdrawal of ISO/R 869-1968
|
95.99 | ISO/TC 61 |
Withdrawal of ISO/R 870-1968
|
95.99 | ISO/TC 61 |
Plastics — Determination of temperature of evolution of flammable gases (decomposition temperature) from a small sample of pulverized material
|
95.99 | ISO/TC 61/SC 4 |
Plastics — Determination of ignition temperature using a hot-air furnace
|
95.99 | ISO/TC 61/SC 4 |
Plastics — Determination of ignition temperature using a hot-air furnace
|
95.99 | ISO/TC 61/SC 4 |
Plastics — Determination of ignition temperature using a hot-air furnace
|
60.60 | ISO/TC 61/SC 4 |
Plastics — Methods of exposure to solar radiation — Part 1: General guidance
|
90.92 | ISO/TC 61/SC 6 |
Plastics — Methods of exposure to solar radiation — Part 1: General guidance
|
40.60 | ISO/TC 61/SC 6 |
Plastics — Methods of exposure to solar radiation — Part 2: Direct weathering and exposure behind window glass
|
90.92 | ISO/TC 61/SC 6 |
Plastics — Methods of exposure to solar radiation — Part 2: Direct weathering and exposure behind window glass
|
40.60 | ISO/TC 61/SC 6 |
Plastics — Methods of exposure to solar radiation — Part 3: Intensified weathering using concentrated solar radiation
|
95.99 | ISO/TC 61/SC 6 |
Plastics — Methods of exposure to solar radiation — Part 3: Intensified weathering using concentrated solar radiation
|
90.92 | ISO/TC 61/SC 6 |
Plastics — Methods of exposure to direct weathering, to weathering using glass-filtered daylight, and to intensified weathering by daylight using Fresnel mirrors
|
95.99 | ISO/TC 61/SC 6 |
Withdrawal of ISO/R 878-1968
|
95.99 | ISO/TC 61 |
Withdrawal of ISO/R 879-1968
|
95.99 | ISO/TC 61 |
Plastics — Determination of creep behaviour — Part 1: Tensile creep
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Determination of creep behaviour — Part 1: Tensile creep
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Determination of creep behaviour — Part 1: Tensile creep — Amendment 1
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Determination of creep behaviour — Part 1: Tensile creep
|
90.93 | ISO/TC 61/SC 2 |
Plastics — Determination of creep behaviour — Part 2: Flexural creep by three-point loading
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Determination of creep behaviour — Part 2: Flexural creep by three-point loading
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Determination of creep behaviour — Part 2: Flexural creep by three-point loading — Amendment 1
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Determination of creep behaviour — Part 2: Flexural creep by three-point loading
|
60.60 | ISO/TC 61/SC 2 |
Withdrawal of ISO/R 922-1969
|
95.99 | ISO/TC 61 |
Plastics — Determination of the brittleness temperature by impact
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Determination of the brittleness temperature by impact
|
90.93 | ISO/TC 61/SC 2 |
Plastics — Symbols — Part 1: Basic polymers and their special characteristics
|
95.99 | ISO/TC 61/SC 1 |
Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics
|
95.99 | ISO/TC 61/SC 1 |
Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics
|
95.99 | ISO/TC 61/SC 1 |
Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics
|
90.93 | ISO/TC 61/SC 1 |
Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics — Amendment 1: New symbol ST for syndiotactic
|
60.60 | ISO/TC 61/SC 1 |
Plastics — Symbols — Part 2: Fillers and reinforcing materials
|
95.99 | ISO/TC 61/SC 1 |
Plastics — Symbols and abbreviated terms — Part 2: Fillers and reinforcing materials
|
95.99 | ISO/TC 61/SC 1 |
Plastics — Symbols and abbreviated terms — Part 2: Fillers and reinforcing materials
|
90.93 | ISO/TC 61/SC 1 |
Plastics — Symbols and abbreviated terms — Part 3: Plasticizers
|
95.99 | ISO/TC 61/SC 1 |
Plastics — Symbols and abbreviated terms — Part 3: Plasticizers
|
90.93 | ISO/TC 61/SC 1 |
Plastics — Symbols and abbreviated terms — Part 4: Flame retardants
|
95.99 | ISO/TC 61/SC 1 |
Plastics — Symbols and abbreviated terms — Part 4: Flame retardants — Amendment 1: Code numbers
|
95.99 | ISO/TC 61/SC 1 |
Plastics — Symbols and abbreviated terms — Part 4: Flame retardants
|
60.60 | ISO/TC 61/SC 1 |
Plastics — Symbols
|
95.99 | ISO/TC 61 |
Plastics — Determination of the melt flow rate of thermoplastics
|
95.99 | ISO/TC 61 |
Plastics — Determination of behaviour in a ventilated tubular oven
|
95.99 | ISO/TC 61 |
Plastics — Aqueous dispersions of polymers and copolymers — Freeze-thaw cycle stability test
|
95.99 | ISO/TC 61 |
Plastics/rubber — Polymer dispersions and synthetic rubber latices — Freeze-thaw cycle stability test
|
90.60 | ISO/TC 61/SC 9 |
Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pyknometer method and titration method
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pyknometer method and titration method
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pycnometer method and titration method
|
90.92 | ISO/TC 61/SC 5 |
Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pycnometer method and titration method
|
40.60 | ISO/TC 61/SC 5 |
Plastics — Methods for determining the density of non-cellular plastics — Part 2: Density gradient column method
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Methods for determining the density of non-cellular plastics — Part 2: Density gradient column method
|
90.60 | ISO/TC 61/SC 5 |
Plastics — Methods for determining the density of non-cellular plastics — Part 3: Gas pyknometer method
|
90.93 | ISO/TC 61/SC 5 |
Plastics — Methods for determining the density and relative density of non-cellular plastics
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Methods for determining the density and relative density (specific gravity) of plastics excluding cellular plastics
|
95.99 | ISO/TC 61 |
Withdrawal of ISO/R 1195-1970
|
95.99 | ISO/TC 61 |
Plastics — Determination of flammability characteristics of plastics in the form of small specimens in contact with a small flame
|
95.99 | ISO/TC 61/SC 4 |
Plastics — Determination of the burning behaviour of horizontal and vertical specimens in contact with a small-flame ignition source
|
95.99 | ISO/TC 61/SC 4 |
Plastics — Determination of viscosity number of methyl methacrylate polymers and copolymers in dilute solution
|
95.99 | ISO/TC 61 |
Plastics — Determination of flammability and burning rate of plastics in the form of film
|
95.99 | ISO/TC 61 |
Plastics/rubber — Polymer dispersions and rubber latices (natural and synthetic) — Determination of surface tension by the ring method
|
95.99 | ISO/TC 45/SC 2 |
Plastics/rubber — Polymer dispersions and rubber latices (natural and synthetic) — Determination of surface tension by the ring method
|
95.99 | ISO/TC 45/SC 3 |
Plastics/rubber — Polymer dispersions and rubber latices (natural and synthetic) — Determination of surface tension
|
60.60 | ISO/TC 45/SC 3 |
Plastics — Aqueous dispersions of polymers and copolymers — Determination of residue at 105 degrees C
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Polymer dispersions — Determination of non-volatile matter (residue) at specified temperatures
|
95.99 | ISO/TC 61/SC 9 |
Withdrawal of ISO/R 1627-1970
|
95.99 | ISO/TC 61 |
Guidelines for the standardization of methods for the determination of viscosity number and limiting viscosity number of polymers in dilute solution — Part 1: General conditions
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 1: General principles
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 1: General principles
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 1: General principles — Amendment 1
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 1: General principles
|
90.92 | ISO/TC 61/SC 5 |
Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 1: General principles
|
50.20 | ISO/TC 61/SC 5 |
Plastics — Directives for the standardization of methods for the determination of the dilute solution viscosity of polymers
|
95.99 | ISO/TC 61 |
Plastics — Liquid resins — Determination of density by the pyknometer method
|
95.99 | ISO/TC 61 |
Plastics — Liquid resins — Determination of density by the pyknometer method
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Liquid resins — Determination of density by the pycnometer method
|
60.60 | ISO/TC 61/SC 5 |
Plastics — Determination of hardness — Part 1: Ball indentation method
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Determination of hardness — Part 1: Ball indentation method
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Determination of hardness — Part 1: Ball indentation method
|
90.93 | ISO/TC 61/SC 2 |
Plastics — Determination of hardness by the ball indentation method — Part 2: Rockwell hardness
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Determination of hardness — Part 2: Rockwell hardness
|
90.93 | ISO/TC 61/SC 2 |
Plastics and ebonite — Determination of hardness by the ball indentation method
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Polymer dispersions — Determination of white point temperature and minimum film-forming temperature
|
90.93 | ISO/TC 61/SC 9 |
Resins in the liquid state or as emulsions or dispersions — Determination of Brookfield RV viscosity
|
95.99 | ISO/TC 61 |
Plastics — Resins in the liquid state or as emulsions or dispersions — Determination of apparent viscosity by the Brookfield Test method
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Resins in the liquid state or as emulsions or dispersions — Determination of apparent viscosity using a single cylinder type rotational viscometer method
|
90.93 | ISO/TC 61/SC 5 |
Plastics — Determination of time-temperature limits after exposure to prolonged action of heat
|
95.99 | ISO/TC 61 |
Plastics — Determination of time-temperature limits after prolonged exposure to heat
|
90.93 | ISO/TC 61/SC 6 |
Plastics — Preparation of test specimens by machining
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Preparation of test specimens by machining — Technical Corrigendum 1
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Preparation of test specimens by machining
|
90.60 | ISO/TC 61/SC 9 |
Plastics — Determination of melting temperature of semi-crystalline polymers — Optical method
|
95.99 | ISO/TC 61 |
Plastics — Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods — Technical Corrigendum 1
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods
|
60.60 | ISO/TC 61/SC 5 |
Plastics — Preparation and use of multipurpose test specimens
|
95.99 | ISO/TC 61 |
Plastics — Multipurpose test specimens
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Multipurpose test specimens
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Multipurpose test specimens
|
90.93 | ISO/TC 61/SC 2 |
Rheology — Part 1: Vocabulary and symbols for rotational and oscillatory rheometry
|
60.60 | ISO/TC 35/SC 9 |
Rheology — Part 2: General principles of rotational and oscillatory rheometry
|
60.60 | ISO/TC 35/SC 9 |
Plastics — Polymers/resins in the liquid state or as emulsions or dispersions — Determination of viscosity using a rotational viscometer with defined shear rate
|
95.99 | ISO/TC 35/SC 9 |
Paints, varnishes and plastics — Determination of non-volatile-matter content
|
95.99 | ISO/TC 35 |
Paints, varnishes and plastics — Determination of non-volatile-matter content
|
95.99 | ISO/TC 35 |
Paints, varnishes and plastics — Determination of non-volatile-matter content
|
90.60 | ISO/TC 35/SC 9 |
Plastics — Determination of ash — Part 1: General methods
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of ash — Part 1: General methods
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of ash — Part 1: General methods
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of ash — Part 1: General methods
|
90.60 | ISO/TC 61/SC 5 |
Withdrawal of ISO 3451-1976
|
95.99 | ISO/TC 61 |
Withdrawal of ISR/TR 3717-1975
|
95.99 | ISO/TC 61 |
Withdrawal of ISO/TR 3718-1975
|
95.99 | ISO/TC 61 |
Plastics — Measurement of resistivity of conductive plastics
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Measurement of resistivity of conductive plastics
|
60.60 | ISO/TC 61/SC 5 |
Plastics — Determination of modulus of elasticity by alternating flexure
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Polymer dispersions — Determination of sieve residue (gross particle and coagulum content)
|
90.92 | ISO/TC 61/SC 9 |
Plastics — Polymer dispersions — Determination of sieve residue (gross particle and coagulum content)
|
30.60 | ISO/TC 61/SC 9 |
Plastics — Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or artificial light
|
95.99 | ISO/TC 61/SC 6 |
Plastics — Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or laboratory light sources
|
95.99 | ISO/TC 61/SC 6 |
Plastics — Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or laboratory light sources
|
95.99 | ISO/TC 61/SC 6 |
Plastics — Determination of changes in colour and variations in properties after exposure to glass-filtered solar radiation, natural weathering or laboratory radiation sources
|
90.92 | ISO/TC 61/SC 6 |
Plastics — Determination of changes in colour and variations in properties after exposure to glass-filtered solar radiation, natural weathering or laboratory radiation sources
|
40.60 | ISO/TC 61/SC 6 |
Plastics — Determination of burning behaviour by oxygen index — Part 1: Guidance
|
95.99 | ISO/TC 61/SC 4 |
Plastics — Determination of burning behaviour by oxygen index — Part 1: General requirements
|
90.93 | ISO/TC 61/SC 4 |
Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test
|
95.99 | ISO/TC 61/SC 4 |
Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test — Amendment 1
|
95.99 | ISO/TC 61/SC 4 |
Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test
|
90.93 | ISO/TC 61/SC 4 |
Plastics — Determination of burning behaviour by oxygen index — Part 3: Elevated-temperature test
|
95.99 | ISO/TC 61/SC 4 |
Plastics — Determination of burning behaviour by oxygen index — Part 3: Elevated-temperature test
|
90.93 | ISO/TC 61/SC 4 |
Plastics — Determination of burning behaviour by oxygen index — Part 4: High gas velocity test
|
60.60 | ISO/TC 61/SC 4 |
Plastics — Determination of flammability by oxygen index
|
95.99 | ISO/TC 61/SC 4 |
Plastics — Determination of resistance to environmental stress cracking (ESC) — Bent strip method
|
95.99 | ISO/TC 61/SC 6 |
Plastics — Determination of environmental stress cracking (ESC) — Ball or pin impression method
|
95.99 | ISO/TC 61 |
Plastics — Determination of environmental stress cracking (ESC) — Ball or pin impression method
|
95.99 | ISO/TC 61/SC 6 |
Plastics — Methods of exposure to natural weathering
|
95.99 | ISO/TC 61/SC 6 |
Plastics — Determination of the effects of exposure to damp heat, water spray and salt mist
|
95.99 | ISO/TC 61/SC 6 |
Plastics — Determination of the effects of exposure to damp heat, water spray and salt mist
|
95.99 | ISO/TC 61/SC 6 |
Plastics — Determination of the effects of exposure to damp heat, water spray and salt mist
|
95.99 | ISO/TC 61/SC 6 |
Plastics — Determination of the effects of exposure to damp heat, water spray and salt mist
|
90.93 | ISO/TC 61/SC 6 |
Chemically-induced ultra-weak photon emission (UPE) — Measurement as an analysis method of degradation of polymeric material
|
60.60 | ISO/TC 61/SC 6 |
Plastics — Method of exposure to electrodeless plasma radiation sources
|
60.60 | ISO/TC 61/SC 6 |
Measurement method of anti-biofilm activity on plastic and other non-porous surfaces
|
60.60 | ISO/TC 61/SC 6 |
Plastics — Methods of exposure to laboratory light sources — Part 1: General guidance
|
95.99 | ISO/TC 61/SC 6 |
Plastics — Methods of exposure to laboratory light sources — Part 1: General guidance
|
95.99 | ISO/TC 61/SC 6 |
Plastics — Methods of exposure to laboratory light sources — Part 1: General guidance
|
95.99 | ISO/TC 61/SC 6 |
Plastics — Methods of exposure to laboratory light sources — Part 1: General guidance and requirements
|
60.60 | ISO/TC 61/SC 6 |
Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc sources
|
95.99 | ISO/TC 61/SC 6 |
Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps
|
95.99 | ISO/TC 61/SC 6 |
Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps — Amendment 1
|
95.99 | ISO/TC 61/SC 6 |
Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps
|
90.93 | ISO/TC 61/SC 6 |
Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps — Amendment 1: Classification of daylight filters
|
60.60 | ISO/TC 61/SC 6 |
Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps
|
95.99 | ISO/TC 61/SC 6 |
Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps
|
95.99 | ISO/TC 61/SC 6 |
Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps
|
95.99 | ISO/TC 61/SC 6 |
Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps
|
95.99 | ISO/TC 61/SC 6 |
Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps
|
60.60 | ISO/TC 61/SC 6 |
Plastics — Methods of exposure to laboratory light sources — Part 4: Open-flame carbon-arc lamps
|
95.99 | ISO/TC 61/SC 6 |
Plastics — Methods of exposure to laboratory light sources — Part 4: Open-flame carbon-arc lamps
|
95.99 | ISO/TC 61/SC 6 |
Plastics — Methods of exposure to laboratory light sources — Part 4: Open-flame carbon-arc lamps — Technical Corrigendum 1
|
95.99 | ISO/TC 61/SC 6 |
Plastics — Methods of exposure to laboratory light sources — Part 4: Open-flame carbon-arc lamps
|
90.92 | ISO/TC 61/SC 6 |
Plastics — Methods of exposure to laboratory light sources — Part 4: Open-flame carbon-arc lamps
|
50.20 | ISO/TC 61/SC 6 |
Plastics — Ion exchange resin — Part 1: Determination of exchange capacity of acrylic anion exchange resins
|
60.60 | ISO/TC 61/SC 5 |
Plastics — Ion exchange resin — Part 2: Determination of water content of anion exchange resins in hydroxide form by centrifugation
|
60.60 | ISO/TC 61/SC 5 |
Plastics — Ion exchange resin — Part 3: Determination of exchange capacity of anion exchange resins in hydroxide form
|
60.60 | ISO/TC 61/SC 5 |
Plastics — Ion exchange resin — Part 4: Determination of particle size by laser diffraction method
|
40.20 | ISO/TC 61/SC 5 |
Plastics — Determination of specific aerobic biodegradation rate of solid plastic materials and disappearance time (DT50) under mesophilic laboratory test conditions
|
60.60 | ISO/TC 61/SC 14 |
Specifications for use of poly(lactic acid) based filament in additive manufacturing applications
|
60.60 | ISO/TC 61/SC 14 |
Plastics — Ecotoxicity testing scheme for soluble decomposition intermediates from biodegradable plastic materials and products used in the marine environment — Test methods and requirements
|
60.60 | ISO/TC 61/SC 14 |
Plastics — Smoke generation — Part 1: Guidance on optical-density testing
|
95.99 | ISO/TC 61/SC 4 |
Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test
|
95.99 | ISO/TC 61/SC 4 |
Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test — Technical Corrigendum 1
|
95.99 | ISO/TC 61/SC 4 |
Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test
|
95.99 | ISO/TC 61/SC 4 |
Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test
|
95.99 | ISO/TC 61/SC 4 |
Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test
|
90.92 | ISO/TC 61/SC 4 |
Plastics — Smoke generation — Part 3: Determination of optical density by a dynamic-flow method
|
95.99 | ISO/TC 61/SC 4 |
Plastics — Smoke generation — Determination of optical density by a single-chamber test
|
40.20 | ISO/TC 61/SC 4 |
Testing and characterization of mechanically recycled polypropylene (PP) and polyethylene (PE) for intended use in different plastics processing techniques
|
60.60 | ISO/TC 61/SC 14 |
Plastics — Test method of exposure to white LED lamps
|
60.60 | ISO/TC 61/SC 6 |
Rubber and plastics — Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
|
95.99 | ISO/TC 45/SC 2 |
Rubber and plastics — Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
|
95.99 | ISO/TC 45/SC 2 |
Rubber and plastics — Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
|
90.93 | ISO/TC 45/SC 2 |
Plastics — Determination of pourability
|
60.60 | ISO/TC 61/SC 5 |
Plastics — Determination of environmental stress cracking (ESC) — Constant tensile stress method
|
95.99 | ISO/TC 61 |
Plastics — Determination of environmental stress cracking (ESC) — Constant-tensile-stress method
|
95.99 | ISO/TC 61/SC 6 |
Plastics — Determination of matter extractable by organic solvents (conventional methods)
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of matter extractable by organic solvents (conventional methods)
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of matter extractable by organic solvents (conventional methods)
|
90.92 | ISO/TC 61/SC 5 |
Plastics — Determination of matter extractable by organic solvents (conventional methods)
|
40.60 | ISO/TC 61/SC 5 |
Plastics — Friction and wear by sliding — Identification of test parameters
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Friction and wear by sliding — Identification of test parameters
|
90.93 | ISO/TC 61/SC 2 |
Plastics — Determination of multiaxial impact behaviour of rigid plastics — Part 1: Falling dart method
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Determination of puncture impact behaviour of rigid plastics — Part 1: Non-instrumented impact testing
|
90.93 | ISO/TC 61/SC 2 |
Plastics — Determination of multiaxial impact behaviour of rigid plastics — Part 2: Instrumented puncture test
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Determination of puncture impact behaviour of rigid plastics — Part 2: Instrumented impact testing
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Determination of puncture impact behaviour of rigid plastics — Part 2: Instrumented impact testing
|
60.60 | ISO/TC 61/SC 2 |
Plastics — Determination of dynamic mechanical properties — Part 1: General principles
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Determination of dynamic mechanical properties — Part 1: General principles — Technical Corrigendum 1
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Determination of dynamic mechanical properties — Part 1: General principles
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Determination of dynamic mechanical properties — Part 1: General principles
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of dynamic mechanical properties — Part 1: General principles
|
90.93 | ISO/TC 61/SC 5 |
Plastics — Determination of dynamic mechanical properties — Part 2: Torsion-pendulum method
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Determination of dynamic mechanical properties — Part 2: Torsion-pendulum method — Technical Corrigendum 1
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Determination of dynamic mechanical properties — Part 2: Torsion-pendulum method
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of dynamic mechanical properties — Part 2: Torsion-pendulum method
|
90.93 | ISO/TC 61/SC 5 |
Plastics — Determination of dynamic mechanical properties — Part 3: Flexural vibration — Resonance-curve method
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of dynamic mechanical properties — Part 3: Flexural vibration — Resonance-curve method — Technical Corrigendum 1
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of dynamic mechanical properties — Part 3: Flexural vibration — Resonance-curve method
|
60.60 | ISO/TC 61/SC 5 |
Plastics — Determination of dynamic mechanical properties — Part 4: Tensile vibration — Non-resonance method
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Determination of dynamic mechanical properties — Part 4: Tensile vibration — Non-resonance method
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of dynamic mechanical properties — Part 4: Tensile vibration — Non-resonance method
|
90.93 | ISO/TC 61/SC 5 |
Plastics — Determination of dynamic mechanical properties — Part 5: Flexural vibration — Non-resonance method
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of dynamic mechanical properties — Part 5: Flexural vibration — Non-resonance method — Amendment 1
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Determination of dynamic mechanical properties — Part 5: Flexural vibration — Non-resonance method
|
90.93 | ISO/TC 61/SC 5 |
Plastics — Determination of dynamic mechanical properties — Part 6: Shear vibration — Non-resonance method
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of dynamic mechanical properties — Part 6: Shear vibration — Non-resonance method — Amendment 1
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Determination of dynamic mechanical properties — Part 6: Shear vibration — Non-resonance method
|
90.93 | ISO/TC 61/SC 5 |
Plastics — Determination of dynamic mechanical properties — Part 7: Torsional vibration — Non-resonance method
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of dynamic mechanical properties — Part 7: Torsional vibration — Non-resonance method — Amendment 1
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Determination of dynamic mechanical properties — Part 7: Torsional vibration — Non-resonance method
|
90.93 | ISO/TC 61/SC 5 |
Plastics — Determination of dynamic mechanical properties — Part 8: Longitudinal and shear vibration — Wave-propagation method
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of dynamic mechanical properties — Part 8: Longitudinal and shear vibration — Wave-propagation method
|
90.93 | ISO/TC 61/SC 5 |
Plastics — Determination of dynamic mechanical properties — Part 9: Tensile vibration — Sonic-pulse propagation method
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of dynamic mechanical properties — Part 9: Tensile vibration — Sonic-pulse propagation method — Amendment 1: Precision
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Determination of dynamic mechanical properties — Part 9: Tensile vibration — Sonic-pulse propagation method
|
90.93 | ISO/TC 61/SC 5 |
Plastics — Determination of dynamic mechanical properties — Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Determination of dynamic mechanical properties — Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Determination of dynamic mechanical properties — Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer
|
90.92 | ISO/TC 61/SC 5 |
Plastics — Determination of dynamic mechanical properties — Part 10: Complex shear viscosity using a parallel-plate and a cone-and-plate oscillatory rheometer
|
40.60 | ISO/TC 61/SC 5 |
Plastics — Determination of dynamic mechanical properties — Part 11: Glass transition temperature
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of dynamic mechanical properties — Part 11: Glass transition temperature
|
90.93 | ISO/TC 61/SC 5 |
Plastics — Determination of dynamic mechanical properties — Part 12: Compressive vibration — Non-resonance method
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of dynamic mechanical properties — Part 12: Compressive vibration — Non-resonance method
|
60.60 | ISO/TC 61/SC 5 |
Plastics — Plastics identification using Raman spectrometric methods
|
60.60 | ISO/TC 61/SC 5 |
Plastics — Thermogravimetry of polymers — Temperature scanning method
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of tensile-impact strength
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Determination of tensile-impact strength — Technical Corrigendum 1
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Determination of tensile-impact strength
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Determination of tensile-impact strength
|
60.60 | ISO/TC 61/SC 2 |
Plastics — Determination of permanganate absorption number of caprolactam — Spectrometric method
|
90.93 | ISO/TC 61/SC 5 |
Plastics — Polymer dispersions — Determination of density
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Determination of resistance to wear by abrasive wheels
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Determination of resistance to wear by abrasive wheels
|
90.93 | ISO/TC 61/SC 2 |
Plastics — Instrumental determination of radiant exposure in weathering tests — General guidance and basic test method
|
95.99 | ISO/TC 61/SC 6 |
Plastics — Instrumental determination of radiant exposure in weathering tests — General guidance and basic test method
|
95.99 | ISO/TC 61/SC 6 |
Plastics — Instrumental determination of radiant exposure in weathering tests — General guidance and basic test method
|
90.93 | ISO/TC 61/SC 6 |
Plastics — Determination of burning behaviour of flexible vertical specimens in contact with a small-flame ignition source
|
95.99 | ISO/TC 61/SC 4 |
Plastics — Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source
|
95.99 | ISO/TC 61/SC 4 |
Plastics — Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source — Amendment 1: Specimens
|
95.99 | ISO/TC 61/SC 4 |
Plastics — Determination of burning behaviour of thin flexible vertical specimens in contact with a small flame ignition source
|
60.60 | ISO/TC 61/SC 4 |
Plastics — Fire tests — Standard ignition sources
|
95.99 | ISO/TC 61/SC 4 |
Plastics — Fire tests — Standard ignition sources
|
95.99 | ISO/TC 61/SC 4 |
Plastics — Fire tests — Standard ignition sources — Technical Corrigendum 1
|
95.99 | ISO/TC 61 |
Plastics — Fire tests — Standard ignition sources
|
95.99 | ISO/TC 61/SC 4 |
Plastics — Fire tests — Standard ignition sources
|
95.99 | ISO/TC 61/SC 4 |
Plastics — Fire tests — Standard ignition sources
|
60.60 | ISO/TC 61/SC 4 |
Plastics — Methods for the preparation of samples for biodegradation testing of plastic materials
|
90.93 | ISO/TC 61/SC 14 |
Plastics — Acquisition and presentation of comparable single-point data
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Determination of the combustibility of specimens using a 125 mm flame source
|
95.99 | ISO/TC 61/SC 4 |
Plastics — Survey of ignition sources used for national and international fire tests
|
95.99 | ISO/TC 61/SC 4 |
Plastics — Methodology for assessing polymer photoageing by FTIR and UV/visible spectroscopy
|
90.93 | ISO/TC 61/SC 6 |
Plastics — Guidance for the use of standard fire tests
|
95.99 | ISO/TC 61/SC 4 |
Plastics — Burning behaviour — Guidance for development and use of fire tests
|
95.99 | ISO/TC 61/SC 4 |
Plastics — Burning behaviour — Guidance for development and use of fire tests — Technical Corrigendum 1
|
95.99 | ISO/TC 61/SC 4 |
Plastics — Guidance for the use of standard fire tests
|
90.92 | ISO/TC 61/SC 4 |
Plastics — Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
|
90.93 | ISO/TC 61/SC 5 |
Plastics — Differential scanning calorimetry (DSC) — Part 1: General principles
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Differential scanning calorimetry (DSC) — Part 1: General principles
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Differential scanning calorimetry (DSC) — Part 1: General principles
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Differential scanning calorimetry (DSC) — Part 1: General principles
|
60.60 | ISO/TC 61/SC 5 |
Plastics — Differential scanning calorimetry (DSC) — Part 2: Determination of glass transition temperature
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Differential scanning calorimetry (DSC) — Part 2: Determination of glass transition temperature and glass transition step height
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Differential scanning calorimetry (DSC) — Part 2: Determination of glass transition temperature and step height
|
60.60 | ISO/TC 61/SC 5 |
Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization — Amendment 1
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization
|
90.92 | ISO/TC 61/SC 5 |
Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization
|
40.60 | ISO/TC 61/SC 5 |
Plastics — Differential scanning calorimetry (DSC) — Part 4: Determination of specific heat capacity
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Differential scanning calorimetry (DSC) — Part 4: Determination of specific heat capacity
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Differential scanning calorimetry (DSC) — Part 4: Determination of specific heat capacity
|
60.60 | ISO/TC 61/SC 5 |
Plastics — Differential scanning calorimetry (DSC) — Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Differential scanning calorimetry (DSC) — Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
|
90.92 | ISO/TC 61/SC 5 |
Plastics — Differential scanning calorimetry (DSC) — Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
|
40.60 | ISO/TC 61/SC 5 |
Plastics — Differential scanning calorimetry (DSC) — Part 6: Determination of oxidation induction time
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Differential scanning calorimetry (DSC) — Part 6: Determination of oxidation induction time — Amendment 1
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Differential scanning calorimetry (DSC) — Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Differential scanning calorimetry (DSC) — Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
|
90.92 | ISO/TC 61/SC 5 |
Plastics — Differential scanning calorimetry (DSC) — Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
|
40.60 | ISO/TC 61/SC 5 |
Plastics — Differential scanning calorimetry (DSC) — Part 7: Determination of crystallization kinetics
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Differential scanning calorimetry (DSC) — Part 7: Determination of crystallization kinetics
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Differential scanning calorimetry (DSC) — Part 7: Determination of crystallization kinetics
|
60.60 | ISO/TC 61/SC 5 |
Plastics — Differential scanning calorimetry (DSC) — Part 8: Determination of thermal conductivity
|
60.60 | ISO/TC 61/SC 5 |
Plastics — Thermogravimetry (TG) of polymers — Part 1: General principles
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Thermogravimetry (TG) of polymers — Part 1: General principles
|
60.60 | ISO/TC 61/SC 5 |
Plastics — Thermogravimetry (TG) of polymers — Part 2: Determination of activation energy
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Thermogravimetry (TG) of polymers — Part 2: Determination of activation energy
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Thermogravimetry (TG) of polymers — Part 2: Determination of activation energy
|
60.60 | ISO/TC 61/SC 5 |
Plastics — Thermogravimetry (TG) of polymers — Part 3: Determination of the activation energy using the Ozawa-Friedman plot and analysis of the reaction kinetics
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Thermogravimetry (TG) of polymers — Part 3: Determination of the activation energy using the Ozawa-Friedman plot and analysis of the reaction kinetics
|
60.60 | ISO/TC 61/SC 5 |
Plastics — Thermogravimetry (TG) of polymers — General principles
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Thermomechanical analysis (TMA) — Part 1: General principles
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Thermomechanical analysis (TMA) — Part 1: General principles
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Thermomechanical analysis (TMA) — Part 1: General principles
|
60.60 | ISO/TC 61/SC 5 |
Plastics — Thermomechanical analysis (TMA) — Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Thermomechanical analysis (TMA) — Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature
|
60.60 | ISO/TC 61/SC 5 |
Plastics — Thermomechanical analysis (TMA) — Part 3: Determination of penetration temperature
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Thermomechanical analysis (TMA) — Part 3: Determination of penetration temperature
|
90.60 | ISO/TC 61/SC 5 |
Plastics — Acquisition and presentation of comparable multipoint data — Part 1: Mechanical properties
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Acquisition and presentation of comparable multipoint data — Part 1: Mechanical properties
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Acquisition and presentation of comparable multipoint data — Part 1: Mechanical properties
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Acquisition and presentation of comparable multipoint data — Part 1: Mechanical properties
|
60.60 | ISO/TC 61/SC 2 |
Plastics — Acquisition and presentation of comparable multipoint data — Part 2: Thermal and processing properties
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Acquisition and presentation of comparable multipoint data — Part 2: Thermal and processing properties
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Acquisition and presentation of comparable multipoint data — Part 2: Thermal and processing properties
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Acquisition and presentation of comparable multipoint data — Part 2: Thermal and processing properties
|
60.60 | ISO/TC 61/SC 2 |
Plastics — Acquisition and presentation of comparable multipoint data — Part 3: Environmental influences on properties
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Acquisition and presentation of comparable multipoint data — Part 3: Environmental influences on properties
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Acquisition and presentation of comparable multipoint data — Part 3: Environmental influences on properties
|
60.60 | ISO/TC 61/SC 2 |
Plastics — Determination of the fluidity of plastics using capillary and slit-die rheometers
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of the fluidity of plastics using capillary and slit-die rheometers
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of the fluidity of plastics using capillary and slit-die rheometers
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of the fluidity of plastics using capillary and slit-die rheometers
|
60.60 | ISO/TC 61/SC 5 |
Plastics — Generic identification and marking of plastic products
|
95.99 | ISO/TC 61/SC 1 |
Plastics — Generic identification and marking of plastics products
|
95.99 | ISO/TC 61/SC 1 |
Plastics — Generic identification and marking of plastics products
|
90.93 | ISO/TC 61/SC 1 |
Plastics — Smoke generation — Determination of the corrosivity of fire effluents — Part 1: Guidance
|
95.99 | ISO/TC 61/SC 4 |
Plastics — Smoke generation — Determination of the corrosivity of fire effluents — Part 1: General concepts and applicability
|
90.20 | ISO/TC 61/SC 4 |
Plastics — Smoke generation — Determination of the corrosivity of fire effluents — Part 2: Static method
|
95.99 | ISO/TC 61/SC 4 |
Plastics — Smoke generation — Determination of the corrosivity of fire effluents — Part 3: Dynamic decomposition method using a travelling furnace
|
95.99 | ISO/TC 61/SC 4 |
Plastics — Smoke generation — Determination of the corrosivity of fire effluents — Part 4: Dynamic decomposition method using a conical radiant heater
|
90.60 | ISO/TC 61/SC 4 |
Plastics/rubber — Polymer dispersions and rubber latices (natural and synthetic) — Definitions and review of test methods
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Determination of viscosity using a falling-ball viscometer — Part 1: Inclined-tube method
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of viscosity using a falling-ball viscometer — Part 1: Inclined-tube method
|
90.93 | ISO/TC 61/SC 5 |
Plastics — Vertical flame spread determination for film and sheet
|
95.99 | ISO/TC 61/SC 4 |
Plastics — Vertical flame spread determination for film and sheet
|
90.93 | ISO/TC 61/SC 4 |
Plastics — Determination of the total luminous transmittance of transparent materials — Part 1: Single-beam instrument
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of the total luminous transmittance of transparent materials — Part 1: Single-beam instrument
|
90.93 | ISO/TC 61/SC 5 |
Plastics — Determination of the total luminous transmittance of transparent materials — Part 2: Double-beam instrument
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of the total luminous transmittance of transparent materials — Part 2: Double-beam instrument
|
60.60 | ISO/TC 61/SC 5 |
Plastics — Determination of fracture toughness (GIC and KIC) — Linear elastic fracture mechanics (LEFM) approach
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Determination of fracture toughness (GIC and KIC) — Linear elastic fracture mechanics (LEFM) approach — Amendment 1: Guidelines for the testing of injection-moulded plastics containing discontinuous reinforcing fibres
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Determination of fracture toughness (GIC and KIC) — Linear elastic fracture mechanics (LEFM) approach
|
90.60 | ISO/TC 61/SC 2 |
Plastics/rubber — Polymer dispersions and rubber latices (natural and synthetic) — Determination of residual monomers and other organic components by capillary-column gas chromatography — Part 1: Direct liquid injection method
|
95.99 | ISO/TC 61/SC 9 |
Plastics/rubber — Determination of residual monomers and other organic components by capillary-column gas chromatography — Part 1: Direct liquid injection method
|
60.60 | ISO/TC 61/SC 9 |
Plastics/rubber — Polymer dispersions and rubber latices (natural and synthetic) — Determination of residual monomers and other organic components by capillary-column gas chromatography — Part 2: Headspace method
|
90.92 | ISO/TC 61/SC 9 |
Plastics/rubber — Polymer dispersions and rubber latices (natural and synthetic) — Determination of residual monomers and other organic components by capillary-column gas chromatography — Part 2: Headspace method
|
30.60 | ISO/TC 61/SC 9 |
Plastics — Simple heat release test using a conical radiant heater and a thermopile detector
|
95.99 | ISO/TC 61/SC 4 |
Plastics — Simple heat release test using a conical radiant heater and a thermopile detector
|
95.99 | ISO/TC 61/SC 4 |
Plastics — Simple heat release test using a conical radiant heater and a thermopile detector
|
60.60 | ISO/TC 61/SC 4 |
Plastics — Determination of the ultimate anaerobic biodegradation of plastic materials in controlled slurry digestion systems — Method by measurement of biogas production
|
95.99 | ISO/TC 61/SC 14 |
Plastics — Determination of the ultimate anaerobic biodegradation of plastic materials in controlled slurry digestion systems — Method by measurement of biogas production
|
90.60 | ISO/TC 61/SC 14 |
Plastics — Determination of haze for transparent materials
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of haze for transparent materials — Technical Corrigendum 1
|
60.60 | ISO/TC 61/SC 5 |
Plastics — Determination of haze for transparent materials
|
60.60 | ISO/TC 61/SC 5 |
Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium — Method by measuring the oxygen demand in a closed respirometer
|
95.99 | ISO/TC 61/SC 14 |
Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium — Method by measuring the oxygen demand in a closed respirometer — Technical Corrigendum 1
|
95.99 | ISO/TC 61/SC 5 |
Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium — Method by measuring the oxygen demand in a closed respirometer
|
90.60 | ISO/TC 61/SC 14 |
Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium — Method by analysis of evolved carbon dioxide
|
95.99 | ISO/TC 61/SC 14 |
Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium — Method by analysis of evolved carbon dioxide — Technical Corrigendum 1
|
95.99 | ISO/TC 61/SC 14 |
Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium — Method by analysis of evolved carbon dioxide
|
95.99 | ISO/TC 61/SC 14 |
Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium — Method by analysis of evolved carbon dioxide
|
60.60 | ISO/TC 61/SC 14 |
Plastics — Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system — Method by measurement of biogas production
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system — Method by measurement of biogas production — Technical Corrigendum 1
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system — Method by measurement of biogas production
|
90.93 | ISO/TC 61/SC 14 |
Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions — Method by analysis of evolved carbon dioxide — Part 1: General method
|
95.99 | ISO/TC 61/SC 5 |
Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions — Method by analysis of evolved carbon dioxide — Part 1: General method — Technical Corrigendum 1
|
95.99 | ISO/TC 61/SC 5 |
Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions — Method by analysis of evolved carbon dioxide — Part 1: General method
|
90.93 | ISO/TC 61/SC 14 |
Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions — Method by analysis of evolved carbon dioxide — Part 2: Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test
|
95.99 | ISO/TC 61/SC 14 |
Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions — Method by analysis of evolved carbon dioxide — Part 2: Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test — Technical Corrigendum 1
|
95.99 | ISO/TC 61/SC 14 |
Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions — Method by analysis of evolved carbon dioxide — Part 2: Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test
|
90.92 | ISO/TC 61/SC 14 |
Determination of the ultimate aerobic biodegradability and disintegration of plastic materials under controlled composting conditions — Method by analysis of evolved carbon dioxide
|
95.99 | ISO/TC 61/SC 5 |
Determination of the ultimate aerobic biodegradability and disintegration of plastic materials under controlled composting conditions — Method by analysis of evolved carbon dioxide — Amendment 1: Use of activated vermiculite instead of mature compost
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of caprolactam and its cyclic and linear oligomers by HPLC
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of caprolactam and its cyclic and linear oligomers by HPLC
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of caprolactam and its cyclic and linear oligomers by HPLC
|
90.93 | ISO/TC 61/SC 5 |
Plastics — Guidelines for the recovery and recycling of plastics waste — Part 1: General principles
|
30.60 | ISO/TC 61/SC 14 |
Plastics — Guidelines for the recovery and recycling of plastics waste — Part 5: Organic/biological recycling
|
40.20 | ISO/TC 61/SC 14 |
Plastics — Guidelines for the recovery and recycling of plastics waste
|
95.99 | ISO/TC 61 |
Plastics — Guidelines for the recovery and recycling of plastics waste
|
90.92 | ISO/TC 61/SC 14 |
Plastics — Methods for marine exposure
|
95.99 | ISO/TC 61/SC 6 |
Plastics — Methods for marine exposure
|
90.93 | ISO/TC 61/SC 6 |
Plastics — Determination of water content
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of water content
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of water content
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of water content
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of water content
|
90.60 | ISO/TC 61/SC 5 |
Plastics — Development and use of intermediate-scale fire tests for plastics products — Part 1: General guidance
|
95.99 | ISO/TC 61/SC 4 |
Plastics — Development and use of intermediate-scale fire tests for plastics products — Part 1: General guidance
|
90.93 | ISO/TC 61/SC 4 |
Plastics — Development and use of intermediate-scale fire tests for plastics products — Part 2: Use of intermediate-scale tests for semi-finished and finished products
|
95.99 | ISO/TC 61/SC 4 |
Plastics — Development and use of intermediate-scale fire tests for plastics products — Part 2: Use of intermediate-scale tests for semi-finished and finished products
|
60.60 | ISO/TC 61/SC 4 |
Plastics — Determination of tension-tension fatigue crack propagation — Linear elastic fracture mechanics (LEFM) approach
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Determination of tension-tension fatigue crack propagation — Linear elastic fracture mechanics (LEFM) approach
|
90.20 | ISO/TC 61/SC 2 |
Plastics — Determination of the ultimate anaerobic biodegradation and disintegration under high-solids anaerobic-digestion conditions — Method by analysis of released biogas
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of the ultimate anaerobic biodegradation and disintegration under high-solids anaerobic-digestion conditions — Method by analysis of released biogas — Technical Corrigendum 1
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of the ultimate anaerobic biodegradation under high-solids anaerobic-digestion conditions — Method by analysis of released biogas
|
90.60 | ISO/TC 61/SC 14 |
Plastics — Determination of linear dimensions of test specimens
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Determination of linear dimensions of test specimens — Technical Corrigendum 1
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Determination of linear dimensions of test specimens
|
90.93 | ISO/TC 61/SC 2 |
Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 1: General principles
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 1: General principles — Technical Corrigendum 1
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 1: General principles
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography — Part 1: General principles
|
90.93 | ISO/TC 61/SC 5 |
Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 2: Universal calibration method
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 2: Universal calibration method
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography — Part 2: Universal calibration method
|
90.93 | ISO/TC 61/SC 5 |
Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 3: Low-temperature method
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 3: Low-temperature method
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography — Part 3: Low-temperature method
|
90.93 | ISO/TC 61/SC 5 |
Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 4: High-temperature method
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 4: High-temperature method
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography — Part 4: High-temperature method
|
90.93 | ISO/TC 61/SC 5 |
Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 5: Method using light-scattering detection
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography — Part 5: Light-scattering method
|
90.93 | ISO/TC 61/SC 5 |
Plastics — Determination of xylene-soluble matter in polypropylene
|
95.99 | ISO/TC 61/SC 9 |
Plastics — Determination of xylene-soluble matter in polypropylene
|
60.60 | ISO/TC 61/SC 9 |
Plastics — Biobased content — Part 1: General principles
|
90.93 | ISO/TC 61/SC 14 |
Plastics — Biobased content — Part 2: Determination of biobased carbon content
|
95.99 | ISO/TC 61/SC 14 |
Plastics — Biobased content — Part 2: Determination of biobased carbon content
|
90.93 | ISO/TC 61/SC 14 |
Plastics — Biobased content — Part 3: Determination of biobased synthetic polymer content
|
90.93 | ISO/TC 61/SC 14 |
Plastics — Biobased content — Part 4: Determination of biobased mass content
|
95.99 | ISO/TC 61/SC 14 |
Plastics — Biobased content — Part 4: Determination of biobased mass content
|
60.60 | ISO/TC 61/SC 14 |
Plastics — Biobased content — Part 5: Declaration of biobased carbon content, biobased synthetic polymer content and biobased mass content
|
90.92 | ISO/TC 61/SC 14 |
Plastics — Marine biodegradation testing — Preparation of optimized intertidal seawater and sediment
|
50.20 | ISO/TC 61/SC 14 |
Plastics — Disintegration field test of plastics under water environmental conditions
|
40.60 | ISO/TC 61/SC 14 |
Plastics — Assessment of the effectiveness of fungistatic compounds in plastics formulations
|
95.99 | ISO/TC 61/SC 6 |
Plastics — Assessment of the effectiveness of fungistatic compounds in plastics formulations
|
90.93 | ISO/TC 61/SC 6 |
Plastics — Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test
|
95.99 | ISO/TC 61/SC 14 |
Plastics — Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test
|
95.99 | ISO/TC 61/SC 14 |
Plastics — Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test
|
60.60 | ISO/TC 61/SC 14 |
Specifications for compostable plastics
|
95.99 | ISO/TC 61/SC 5 |
Specifications for compostable plastics
|
95.99 | ISO/TC 61/SC 14 |
Plastics — Organic recycling — Specifications for compostable plastics
|
60.60 | ISO/TC 61/SC 14 |
Plastics — Determination of image clarity (degree of sharpness of reflected or transmitted image)
|
90.93 | ISO/TC 61/SC 5 |
Plastics — Determination of yellowness index and change in yellowness index
|
90.60 | ISO/TC 61/SC 5 |
Plastics — Determination of fracture toughness (GIC and KIC) at moderately high loading rates (1 m/s)
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Determination of fracture toughness (GIC and KIC) at moderately high loading rates (1 m/s)
|
90.60 | ISO/TC 61/SC 2 |
Plastics — Guide to the acquisition and presentation of design data
|
90.93 | ISO/TC 61/SC 2 |
Plastics — Environmental aspects — General guidelines for their inclusion in standards
|
95.99 | ISO/TC 61/SC 14 |
Plastics — Environmental aspects — General guidelines for their inclusion in standards
|
90.93 | ISO/TC 61/SC 14 |
Plastics — Quantitative evaluation of scratch-induced damage and scratch visibility
|
90.93 | ISO/TC 61/SC 2 |
Plastics — Determination of the ultimate aerobic biodegradability in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of the ultimate aerobic biodegradability of plastic materials in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved
|
95.99 | ISO/TC 61/SC 14 |
Plastics — Determination of the ultimate aerobic biodegradability of plastic materials in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved
|
90.60 | ISO/TC 61/SC 14 |
Plastics — Determination of specific volume as a function of temperature and pressure (pvT diagram) — Piston apparatus method
|
90.92 | ISO/TC 61/SC 5 |
Plastics — Determination of specific volume as a function of temperature and pressure, pvT diagram — Piston apparatus method
|
40.60 | ISO/TC 61/SC 5 |
Plastics — Standard table for reference global solar spectral irradiance at sea level — Horizontal, relative air mass 1
|
60.60 | ISO/TC 61/SC 6 |
Plastics — Parameters comparing the spectral irradiance of a laboratory light source for weathering applications to a reference solar spectral irradiance
|
95.99 | ISO/TC 61/SC 6 |
Plastics — Parameters comparing the spectral irradiance of a laboratory light source for weathering applications to a reference solar spectral irradiance
|
90.60 | ISO/TC 61/SC 6 |
Plastics — Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sandy sediment interface — Method by measuring the oxygen demand in closed respirometer
|
90.93 | ISO/TC 61/SC 14 |
Plastics — Determination of the aerobic biodegradation of plastic materials exposed to seawater using accelerated conditions in laboratory
|
30.60 | ISO/TC 61/SC 14 |
Plastics — Strain rate dependent tensile tests for thermoplastics at ambient temperature
|
40.20 | ISO/TC 61/SC 2 |
Plastics — Method of controlled acceleration of laboratory weathering by increased irradiance
|
90.93 | ISO/TC 61/SC 6 |
Plastics — Use of polyethylene reference specimens (PERS) for monitoring laboratory and outdoor weathering conditions
|
95.99 | ISO/TC 61/SC 6 |
Plastics — Use of polyethylene reference specimens (PERS) for monitoring laboratory and outdoor weathering conditions
|
90.92 | ISO/TC 61/SC 6 |
Plastics — Determination of scratch properties
|
90.92 | ISO/TC 61/SC 2 |
Plastics — Determination of scratch properties
|
40.60 | ISO/TC 61/SC 2 |
Plastics — Instrumented micro-indentation test for hardness measurement
|
90.93 | ISO/TC 61/SC 2 |
Plastics — Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface — Method by analysis of evolved carbon dioxide
|
95.99 | ISO/TC 61/SC 14 |
Plastics — Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface — Method by analysis of evolved carbon dioxide
|
60.60 | ISO/TC 61/SC 14 |
Plastics — Abrasion test method for artificial turfs using combined UV exposure and mechanical wear
|
60.60 | ISO/TC 61/SC 6 |
Plastics — Determination of average molecular mass and mixture ratio of poly(ethylene glycol) and its derivatives by MALDI-TOF-MS
|
90.93 | ISO/TC 61/SC 5 |
Plastics — Temperature modulated DSC — Part 1: General principles
|
90.93 | ISO/TC 61/SC 5 |
Plastics — Temperature modulated DSC — Part 2: Measurement of specific heat capacity cp
|
60.60 | ISO/TC 61/SC 5 |
Plastics — Temperature modulated DSC — Part 3: Separation of overlapping thermal transitions
|
60.60 | ISO/TC 61/SC 5 |
Plastics — Guidance on fire characteristics and fire performance of PVC materials used in building applications
|
60.60 | ISO/TC 61/SC 4 |
Plastics — Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test
|
95.99 | ISO/TC 61/SC 14 |
Plastics — Determination of the degree of disintegration of plastic materials under composting conditions in a laboratory-scale test
|
60.60 | ISO/TC 61/SC 14 |
Plastics — Determination of abrasive wear by reciprocating linear sliding motion
|
60.60 | ISO/TC 61/SC 2 |
Plastics — Test specimens
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Test specimens
|
95.99 | ISO/TC 61/SC 2 |
Plastics — Test specimens
|
60.60 | ISO/TC 61/SC 2 |
Plastics — Determination of the transient extensional viscosity of polymer melts
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of the transient extensional viscosity of polymer melts
|
60.60 | ISO/TC 61/SC 5 |
Plastics — Reaction to fire — Test method for flame spread and combustion product release from vertically oriented specimens
|
90.93 | ISO/TC 61/SC 4 |
Plastics — Methods of exposure to determine the wavelength dependent degradation using spectrally dispersed radiation
|
90.93 | ISO/TC 61/SC 6 |
Plastics — Test method for exposing polyolefins outdoors combining natural weathering and artificial irradiation
|
90.93 | ISO/TC 61/SC 6 |
Plastics and ebonite — Verification of Shore durometers
|
90.93 | ISO/TC 61/SC 2 |
Measurement of antiviral activity on plastics and other non-porous surfaces
|
90.93 | ISO/TC 61/SC 6 |
Plastics — Environmental aspects — State of knowledge and methodologies
|
60.60 | ISO/TC 61/SC 14 |
Plastics — Determination of thermal conductivity and thermal diffusivity — Part 1: General principles
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of thermal conductivity and thermal diffusivity — Part 1: General principles
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of thermal conductivity and thermal diffusivity — Part 1: General principles
|
60.60 | ISO/TC 61/SC 5 |
Plastics — Determination of thermal conductivity and thermal diffusivity — Part 2: Transient plane heat source (hot disc) method
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of thermal conductivity and thermal diffusivity — Part 2: Transient plane heat source (hot disc) method
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of thermal conductivity and thermal diffusivity — Part 2: Transient plane heat source (hot disc) method
|
60.60 | ISO/TC 61/SC 5 |
Plastics — Determination of thermal conductivity and thermal diffusivity — Part 3: Temperature wave analysis method
|
90.93 | ISO/TC 61/SC 5 |
Plastics — Determination of thermal conductivity and thermal diffusivity — Part 4: Laser flash method
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of thermal conductivity and thermal diffusivity — Part 4: Laser flash method
|
95.99 | ISO/TC 61/SC 5 |
Plastics — Determination of thermal conductivity and thermal diffusivity — Part 4: Light flash method
|
60.60 | ISO/TC 61/SC 5 |
Plastics — Determination of thermal conductivity and thermal diffusivity — Part 5: Results of interlaboratory testing of poly(methyl methacrylate) samples
|
60.60 | ISO/TC 61/SC 5 |
Plastics — Determination of thermal conductivity and thermal diffusivity — Part 6: Comparative method for low thermal conductivities using a temperature-modulation technique
|
90.93 | ISO/TC 61/SC 5 |
Plastics — Determination of thermal conductivity and thermal diffusivity — Part 7: Transient measurement of thermal effusivity using a plane heat source
|
60.60 | ISO/TC 61/SC 5 |
Plastics — Determination of resistance to environmental stress cracking (ESC) — Part 1: General guidance
|
90.93 | ISO/TC 61/SC 6 |
Plastics — Determination of resistance to environmental stress cracking (ESC) — Part 2: Constant tensile load method
|
90.93 | ISO/TC 61/SC 6 |
Plastics — Determination of resistance to environmental stress cracking (ESC) — Part 3: Bent strip method
|
90.93 | ISO/TC 61/SC 6 |
Plastics — Determination of resistance to environmental stress cracking (ESC) — Part 4: Ball or pin impression method
|
90.93 | ISO/TC 61/SC 6 |
Plastics — Determination of resistance to environmental stress cracking (ESC) — Part 5: Constant tensile deformation method
|
90.93 | ISO/TC 61/SC 6 |
Plastics — Determination of resistance to environmental stress cracking (ESC) — Part 6: Slow strain rate method
|
90.93 | ISO/TC 61/SC 6 |
Plastics — Validation of force-time curves obtained from high-speed tensile tests
|
60.60 | ISO/TC 61/SC 2 |
Plastics — Measurement of antibacterial activity on plastics surfaces
|
95.99 | ISO/TC 61/SC 6 |
Measurement of antibacterial activity on plastics and other non-porous surfaces
|
90.93 | ISO/TC 61/SC 6 |
Plastics — Assessment of the intrinsic biodegradability of materials exposed to marine inocula under mesophilic aerobic laboratory conditions — Test methods and requirements
|
60.60 | ISO/TC 61/SC 14 |
Plastics — Determination of the aerobic biodegradation of non-floating materials exposed to marine sediment — Method by analysis of evolved carbon dioxide
|
90.60 | ISO/TC 61/SC 14 |
Plastics — Carbon and environmental footprint of biobased plastics — Part 1: General principles
|
60.60 | ISO/TC 61/SC 14 |
Plastics — Carbon and environmental footprint of biobased plastics — Part 2: Material carbon footprint, amount (mass) of CO2 removed from the air and incorporated into polymer molecule
|
60.60 | ISO/TC 61/SC 14 |
Plastics — Carbon and environmental footprint of biobased plastics — Part 3: Process carbon footprint, requirements and guidelines for quantification
|
60.60 | ISO/TC 61/SC 14 |
Plastics — Carbon and environmental footprint of biobased plastics — Part 4: Environmental (total) footprint (Life cycle assessment)
|
60.60 | ISO/TC 61/SC 14 |
Plastics — Determination of the degree of disintegration of plastic materials in marine habitats under real field conditions
|
60.60 | ISO/TC 61/SC 14 |
Plastics — Determination of fracture toughness of films and thin sheets — Essential work of fracture (EWF) method
|
60.60 | ISO/TC 61/SC 2 |
Plastics — Elasticity index — Determination of elastic property of melts
|
60.60 | ISO/TC 61/SC 5 |
Plastics — Determination of apparent activation energies of property changes in standard weathering test methods
|
60.60 | ISO/TC 61/SC 6 |
Plastics — Determination of spray water delivery during spray cycles when using a xenon arc weathering test apparatus
|
60.60 | ISO/TC 61/SC 6 |
Plastics — Test methods for determination of degradation rate and disintegration degree of plastic materials exposed to marine environmental matrices under laboratory conditions
|
60.60 | ISO/TC 61/SC 14 |
Plastics — Recycling and recovery — Necessity of standards
|
60.60 | ISO/TC 61/SC 14 |
Plastics — Microscale Combustion Calorimetry/Pyrolysis combustion flow calorimetry — Part 2: Fingerprinting of plastics
|
30.98 | ISO/TC 61/SC 4 |
Plastics — Intumescence properties of PVC materials and products — Test method for the measurement of expansion with the cone calorimeter
|
60.60 | ISO/TC 61/SC 4 |
Plastics — Application of spread of flame test to plastic pipes
|
60.60 | ISO/TC 61/SC 4 |
Plastics — Fast differential scanning calorimetry (FSC) — Chip calorimetry
|
60.60 | ISO/TC 61/SC 5 |
Plastics — Determination of the aerobic biodegradation of plastic materials exposed to seawater — Part 1: Method by analysis of evolved carbon dioxide
|
60.60 | ISO/TC 61/SC 14 |
Plastics — Determination of the aerobic biodegradation of plastic materials exposed to seawater — Part 2: Method by measuring the oxygen demand in closed respirometer
|
60.60 | ISO/TC 61/SC 14 |
Principles for the analysis of microplastics present in the environment
|
60.60 | ISO/TC 61/SC 14 |
Plastics — Production quality control — Statistical method for using single measurements
|
90.93 | ISO/TC 61/SC 5 |
Plastics — Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites
|
90.93 | ISO/TC 61/SC 4 |
Plastics — Determination of total luminous transmittance and reflectance
|
60.60 | ISO/TC 61/SC 5 |
Plastics — Determination of J-R curves — Fracture toughness
|
60.60 | ISO/TC 61/SC 2 |
Plastics — Determination of mode I plane-strain crack-arrest toughness
|
90.20 | ISO/TC 61/SC 2 |
Plastics — Artificial weathering including acidic deposition
|
90.93 | ISO/TC 61/SC 6 |
Plastics — Burning behaviour — Intermediate-scale fire-resistance testing of fibre-reinforced polymer composites
|
90.60 | ISO/TC 61/SC 4 |
Fire hazard testing — Part 11-10: Test flames — 50 W horizontal and vertical flame test methods
|
95.99 | ISO/TC 61/SC 4 |
Fire hazard testing — Part 11-20: Test flames — 500 W flame test methods
|
95.99 | ISO/TC 61/SC 4 |
Fire hazard testing — Part 11-10: Test flames — 50 W horizontal and vertical flame test methods — Amendment 1
|
95.99 | ISO/TC 61/SC 4 |
Fire hazard testing — Part 11-20: Test flames — 500 W flame test methods — Amendment 1
|
95.99 | ISO/TC 61/SC 4 |
Determination of certain substances in electrotechnical products — Part 11: Tris (2-chloroethyl) phosphate (TCEP) in plastics by gas chromatography-mass spectrometry (GC-MS) and liquid chromatography-mass spectrometry (LC-MS)
|
60.60 | ISO/TC 61/SC 5 |
No se ha encontrado ningún registro que coincida. Pruebe a cambiar los ajustes de filtro.