Norme internationale
ISO 8518:2022
Air des lieux de travail — Dosage du plomb particulaire et des composés particulaires du plomb — Méthode par spectrométrie d'absorption atomique dans la flamme et méthode par spectrométrie d'absorption avec atomisation électrothermique
Numéro de référence
ISO 8518:2022
Edition 3
2022-10
Norme internationale
Prévisualiser
ISO 8518:2022
78373
Indisponible en français
Publiée (Edition 3, 2022)

ISO 8518:2022

ISO 8518:2022
78373
Langue
Format
CHF 151
Convertir les francs suisses (CHF) dans une autre devise

Résumé

This document specifies flame and electrothermal atomic absorption spectrometric methods for the determination of the time-weighted average mass concentration of particulate lead and lead compounds in workplace air.

These methods are typically applicable to personal sampling of the inhalable fraction of airborne particles, as defined in ISO 7708, and to static (area) sampling. It can be applied to other health-related fractions as required.

The sample dissolution procedure specifies hot plate or microwave assisted digestion, or ultrasonic extraction (see 11.2). The use of an alternative, more vigorous dissolution procedure is necessary when it is desired to extract lead from compounds present in the test atmosphere that are insoluble using the dissolution procedures described herein (see Clause 5).

The flame atomic absorption method is applicable to the determination of masses of approximately 1 µg to 200 µg of lead per sample, without dilution[1]. The electrothermal atomic absorption method is applicable to the determination of masses of approximately 0,01 µg to 0,5 µg of lead per sample, without dilution[1].

The ultrasonic extraction procedure has been validated for the determination of masses of approximately 20 µg to 100 µg of lead per sample, for laboratory-generated lead fume air filter samples[2].

The concentration range for lead in air for which this procedure is applicable is determined in part by the sampling procedure selected by the user (see 10.1).

Informations générales

  •  : Publiée
     : 2022-10
    : Norme internationale publiée [60.60]
  •  : 3
  • ISO/TC 146/SC 2
    13.040.30 
  • RSS mises à jour

Vous avez une question?

Consulter notre FAQ

Service à la clientèle
+41 22 749 08 88

Horaires d’ouverture:
De lundi à vendredi - 09:00-12:00, 14:00-17:00 (UTC+1)