Brinell hardness test for steel

Rockwell hardness test (B and C scales) for steel

Vickers hardness test for steel (Load 5 to 100 kgf)

Steel — Tensile testing

Steel — Charpy impact test (U-notch)

Izod impact test for steel

Bend test for steel

Steel — Tensile testing of sheet and strip less than 3 mm and not less than 0,5 mm thick

Simple bend testing of steel sheet and strip less than 3 mm thick

Reverse bend testing of steel sheet and strip less than 3 mm thick

Steel — Tensile testing of wire

Steel — Simple torsion testing of wire

Steel — Reverse bend testing of wire

Wrapping test for steel wire

Metallic materials — Verification of Vickers hardness testing machines — Part 2: Less than HV 0,2

Metallic materials — Hardness test — Verification of Vickers hardness testing machines HV 0,2 to HV 100

Verification of Vickers hardness testing machines

Load calibration of testing machines for tensile testing of steel

Metallic materials — Charpy pendulum impact test — Part 1: Test method

Metallic materials — Charpy pendulum impact test — Part 1: Test method

Metallic materials — Charpy pendulum impact test — Part 1: Test method

Metallic materials — Charpy pendulum impact test — Part 2: Verification of test machines

Metallic materials — Charpy pendulum impact test — Part 2: Verification of testing machines

Metallic materials — Charpy pendulum impact test — Part 2: Verification of testing machines

Metallic materials — Charpy pendulum impact test — Part 3: Preparation and characterization of Charpy V reference test pieces for verification of test machines

Metallic materials — Charpy pendulum impact test — Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines

Metallic materials — Charpy pendulum impact test — Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines

Steel — Charpy impact test (V-notch)

Modified Erichsen cupping test for steel sheet and strip

Metallic materials — Hardness test — Verification of Brinell hardness testing machines

Flanging test on steel tubes

Drift expanding test on steel tubes

Bend test on steel tubes

Brinell hardness test for grey cast iron

Tensile testing of light metals and their alloys

Brinell hardness test for light metals and their alloys

Wickers hardness test for light metals and their alloys

Drift expanding test on copper and copper alloy tubes

Flattening test on steel tubes

Interrupted creep testing of steel at elevated temperatures (load and temperature interrupted)

Metallic materials — Uninterrupted uniaxial creep testing in tension — Method of test

Non-interrupted creep testing of steel at elevated temperatures

Metallic materials — Uniaxial creep testing in tension — Method of test

Metallic materials — Uniaxial creep testing in tension — Method of test

Metallic materials — Uniaxial creep testing in tension — Method of test

Determination of proof stress and proving test for steel at elevated temperature

Creep stress rupture testing of steel at elevated temperatures

General principles for fatigue testing of metals

Ring expanding test on steel tubes

Steel — Tensile testing of tubes

Metallic materials — Calibration of force-proving instruments used for the verification of uniaxial testing machines

Calibration of elastic proving devices

Metallic materials — Calibration of force-proving instruments used for the verification of uniaxial testing machines

Metallic materials — Calibration of force-proving instruments used for the verification of uniaxial testing machines

Metallic materials — Calibration of force-proving instruments used for the verification of uniaxial testing machines

Selection and preparation of samples and test pieces of wrought steels — Part 1: Samples and test pieces for mechanical test

Wrought steel — Selection and preparation of samples and test pieces

Steel and steel products — Location and preparation of samples and test pieces for mechanical testing

Steel and steel products — Location and preparation of samples and test pieces for mechanical testing — Technical Corrigendum 1

Steel and steel products — Location and preparation of samples and test pieces for mechanical testing

Steel and steel products — Location and preparation of samples and test pieces for mechanical testing

Steel and steel products — Location and preparation of samples and test pieces for mechanical testing — Amendment 1

Wrapping test for copper and copper alloy wire

Bend test for copper and copper alloys

Vickers hardness test for copper and copper alloys (Test loads from 2.5 to 50 kgf)

Tensile testing of copper and copper alloys

Tensile testing of copper and copper alloy tubes of circular section

Tensile testing of copper and copper alloy wire

Brinell hardness test for copper and copper alloys

Metallic materials — Hardness test — Tables of Vickers hardness values for use in tests made on flat surfaces — Part 1: HV 5 to HV 100

Metallic materials — Hardness test — Tables of Vickers hardness values for use in tests made on flat surfaces — Part 2: HV 0,2 to less than HV 5

Tables of Vickers hardness values (HV) for metallic materials

Metallic materials — Hardness test — Tables of Brinell hardness values for use in tests made on flat surfaces

Verification of pendulum impact testing machines for testing steels

Metallic materials — Calibration of standardized blocks to be used for Vickers hardness testing machines — Part 2: Less than HV 0,2

Metallic materials — Hardness test — Calibration of standardized blocks to be used for Vickers hardness testing machines HV 0,2 to HV 100

Calibration of standardized blocks to be used for Vickers hardness testing machines

Metallic materials — Hardness test — Calibration of standardized blocks to be used for Rockwell hardness testing machines (scales A - B - C - D - E - F - G - H - K)

Calibration of standardized blocks to be used for Rockwell B and C scale hardness testing machines

Metallic materials — Hardness test — Verification of Rockwell hardness testing machines (scales A - B - C - D - E - F - G - H - K)

Verification of Rockwell B and C scale hardness testing machines

Metallic materials — Hardness test — Calibration of standardized blocks to be used for Brinell hardness testing machines

Metallic materials — Tensile testing at elevated temperature

Mechanical testing of steel at elevated temperatures — Determination of lower yield stress and proof stress and proving test

Metallic materials — Tensile testing at elevated temperature

Grey cast iron — Beam unnotched impact test

Tensile testing of light metal and light metal alloy tubes

Drift expanding test on light metal and light metal alloy tubes

Simple bend test for light metal and light metal alloy sheet and strip of thickness between 0,2 mm (0.008 in) and 7 mm (0.25 in)

Flattening test on aluminium and aluminium alloy tubes

Tensile test for light metal and light metal alloy wires

Simple torsion test for aluminium and aluminium alloy wire

Wrapping test for aluminium and aluminium alloy wire

Metallic materials — Hardness test — Rockwell superficial test (scales 15N, 30N, 45N, 15T, 30T and 45T)

Rockwell superficial hardness test (N and T scales) for steel

Metallic materials — Hardness test — Verification of Rockwell superficial hardness testing machines (scales 15N, 30N, 45N, 15T, 30T and 45T)

Verification of Rockwell superficial N and T scale hardness testing machines

Metals — Axial load fatigue testing

Metallic materials — Fatigue testing — Axial force-controlled method

Metallic materials — Fatigue testing — Axial force-controlled method

Metals — Rotating bar bending fatigue testing

Metallic materials — Rotating bar bending fatigue testing

Metallic materials — Rotating bar bending fatigue testing

Steel — Torsional stress fatigue testing

Metallic materials — Torque-controlled fatigue testing

Metallic materials — Torque-controlled fatigue testing

Calibration of standardized blocks to be used for Rockwell superficial N and T scale hardness testing machines

Copper and copper alloy rolled flat products (thickness less than 2,5 mm (0.1 in)) — Tensile test

Copper and copper alloy tubes of circular section — Flattening test

Aluminium and aluminium alloys — Shear test for rivet wire and rivets

Wrought aluminium, magnesium and their alloys — Selection of specimens and test pieces for mechanical testing

Steel — Conversion of elongation values — Part 1: Carbon and low alloy steels

Steel — Conversion of elongation values — Part 1: Carbon and low alloy steels

Steel — Conversion of elongation values — Part 1: Carbon and low-alloy steels

Steel — Conversion of elongation values — Part 2: Austenitic steels

Steel — Conversion of elongation values — Part 2: Austenitic steels

Tensile testing systems — Determination of K-value

Copper and copper alloys — Reverse bend testing of wire

Copper and copper alloys — Simple torsion testing of wire

Copper and copper alloys — Rockwell superficial hardness test (N and T scales)

Copper and copper alloys — Rockwell hardness test (B, F and G scales)

Sintered metal bushes — Determination of radial crushing strength

Sintered metal bushes — Determination of radial crushing strength

Sintered metal bushings — Determination of radial crushing strength

Sintered metal materials (excluding hardmetal) — Tensile test pieces

Sintered metal materials (excluding hardmetal) — Tensile test pieces

Sintered metal materials, excluding hardmetals — Tensile test pieces

Sintered metal materials, excluding hardmetals — Tensile test pieces

Sintered metal materials, excluding hardmetals — Tensile test pieces

Sintered metal materials, excluding hardmetals — Tensile test pieces

Sintered metal materials and hardmetals — Determination of Young's modulus

Sintered metal materials and hardmetals — Determination of Young modulus

Sintered metal materials, excluding hardmetals — Determination of transverse rupture strength

Sintered metal materials, excluding hardmetals — Determination of transverse rupture strength

Sintered metal materials, excluding hardmetals — Determination of transverse rupture strength — Amendment 1: Precision statement

Sintered metal materials, excluding hardmetals — Determination of transverse rupture strength

Hardmetals — Determination of transverse rupture strength

Hardmetals — Determination of transverse rupture strength

Hardmetals — Rockwell hardness test (scale A) — Part 1: Test method

Hardmetals — Rockwell hardness test (scale A) — Part 2: Preparation and calibration of standard test blocks

Hardmetals — Rockwell hardness test (Scale A)

Steel — Designation of test piece axes

Metallic materials — Designation of test specimen axes in relation to product texture

Metallic materials — Designation of test specimen axes in relation to product texture

Hardmetals — Vickers hardness test

Sintered metal materials, excluding hardmetals — Fatigue test pieces

Sintered metal materials, excluding hardmetals — Fatigue test pieces

Sintered metal materials, excluding hardmetals — Fatigue test pieces

Metallic powders — Determination of green strength by transverse rupture of rectangular compacts

Metallic powders — Determination of green strength by transverse rupture of rectangular compacts

Metallic powders — Determination of green strength by transverse rupture of rectangular compacts

Sintered metal materials, excluding hardmetals — Determination of apparent hardness — Part 1: Materials of essentially uniform section hardness

Sintered metal materials, excluding hardmetals — Determination of apparent hardness — Part 1: Materials of essentially uniform section hardness

Sintered metal materials, excluding hardmetals — Determination of apparent hardness — Part 2: Case-hardened ferrous materials, surface enriched by carbon or carbon and nitrogen

Sintered metal materials, excluding hardmetals — Determination of apparent hardness and microhardness

Sintered metal materials, excluding hardmetals — Determination of apparent hardness and microhardness

Hardmetals — Compression test

Hardmetals — Compression test

Sintered ferrous materials, carburized or carbonitrided — Determination and verification of effective case depth by the Vickers microhardness testing method

Sintered ferrous materials, carburized or carbonitrided — Determination and verification of case-hardening depth by a micro-hardness test

Metallic materials — Knoop hardness test — Part 1: Test method

Metallic materials — Knoop hardness test — Part 1: Test method

Metallic materials — Knoop hardness test — Part 1: Test method

Metallic materials — Knoop hardness test — Part 2: Verification and calibration of testing machines

Metallic materials — Knoop hardness test — Part 2: Verification and calibration of testing machines

Metallic materials — Knoop hardness test — Part 3: Calibration of reference blocks

Metallic materials — Knoop hardness test — Part 3: Calibration of reference blocks

Metallic materials — Knoop hardness test — Part 4: Table of hardness values

Metallic materials — Knoop hardness test — Part 4: Table of hardness values

Metallic materials — Hardness test — Knoop test

Metallic materials — Hardness test — Verification of Knoop hardness testing machines

Metallic materials — Hardness test — Calibration of standardized blocks to be used for Knoop hardness testing machines

Wrought copper and copper alloy products — Selection and preparation of specimens and test pieces for mechanical testing

Steel — Hardness conversions

Metallic materials — Dynamic force calibration for uniaxial fatigue testing — Part 1: Testing systems

Metallic materials — Dynamic force calibration for uniaxial fatigue testing — Part 2: Dynamic calibration device (DCD) instrumentation

Axial load fatigue testing machines — Dynamic force calibration — Strain gauge technique

Sintered metal materials, excluding hardmetals — Unnotched impact test piece

Sintered metal materials, excluding hardmetals — Unnotched impact test piece

Sintered metal materials, excluding hardmetals — Unnotched impact test piece

Metallic materials — Brinell hardness test — Part 1: Test method

Metallic materials — Brinell hardness test — Part 1: Test method

Metallic materials — Brinell hardness test — Part 1: Test method

Metallic materials — Brinell hardness test — Part 1: Test method

Metallic materials — Brinell hardness test — Part 2: Verification and calibration of testing machines

Metallic materials — Brinell hardness test — Part 2: Verification and calibration of testing machines

Metallic materials — Brinell hardness test — Part 2: Verification and calibration of testing machines

Metallic materials — Brinell hardness test — Part 2: Verification and calibration of testing machines

Metallic materials — Brinell hardness test — Part 2: Verification and calibration of testing machines

Metallic materials — Brinell hardness test — Part 3: Calibration of reference blocks

Metallic materials — Brinell hardness test — Part 3: Calibration of reference blocks

Metallic materials — Brinell hardness test — Part 3: Calibration of reference blocks

Metallic materials — Brinell hardness test — Part 3: Calibration of reference blocks

Metallic materials — Brinell hardness test — Part 4: Table of hardness values

Metallic materials — Brinell hardness test — Part 4: Table of hardness values

Metallic materials — Hardness test — Brinell test

Metallic materials — Hardness test — Vickers test — Part 1: HV 5 to HV 100

Metallic materials — Vickers hardness test — Part 1: Test method

Metallic materials — Vickers hardness test — Part 1: Test method

Metallic materials — Vickers hardness test — Part 1: Test method

Metallic materials — Vickers hardness test — Part 1: Test method

Metallic materials — Hardness test — Vickers test — Part 2: HV 0,2 to less than HV 5

Metallic materials — Vickers hardness test — Part 2: Verification of testing machines

Metallic materials — Vickers hardness test — Part 2: Verification and calibration of testing machines

Metallic materials — Vickers hardness test — Part 2: Verification and calibration of testing machines

Metallic materials — Hardness test — Vickers test — Part 3: Less than HV 0,2

Metallic materials — Vickers hardness test — Part 3: Calibration of reference blocks

Metallic materials — Vickers hardness test — Part 3: Calibration of reference blocks

Metallic materials — Vickers hardness test — Part 3: Calibration of reference blocks

Metallic materials — Vickers hardness test — Part 4: Tables of hardness values

Metallic materials — Vickers hardness test — Part 4: Tables of hardness values

Metallic materials — Rockwell hardness test — Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T)

Metallic materials — Rockwell hardness test — Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T)

Metallic materials — Rockwell hardness test — Part 1: Test method

Metallic materials — Rockwell hardness test — Part 1: Test method

Metallic materials — Rockwell hardness test — Part 1: Test method

Metallic materials — Rockwell hardness test — Part 2: Verification and calibration of testing machines (scales A, B, C, D, E, F, G, H, K, N, T)

Metallic materials — Rockwell hardness test — Part 2: Verification and calibration of testing machines (scales A, B, C, D, E, F, G, H, K, N, T)

Metallic materials — Rockwell hardness test — Part 2: Verification and calibration of testing machines and indenters

Metallic materials — Rockwell hardness test — Part 2: Verification and calibration of testing machines and indenters

Metallic materials — Rockwell hardness test — Part 3: Calibration of reference blocks (scales A, B, C, D, E, F, G, H, K, N, T)

Metallic materials — Rockwell hardness test — Part 3: Calibration of reference blocks (scales A, B, C, D, E, F, G, H, K, N, T)

Metallic materials — Rockwell hardness test — Part 3: Calibration of reference blocks

Metallic materials — Rockwell hardness test — Part 3: Calibration of reference blocks

Metallic materials — Hardness test — Rockwell test (scales A - B - C - D - E - F - G - H - K)

Metallic materials — Tensile testing — Part 1: Method of test at room temperature

Metallic materials — Tensile testing — Part 1: Method of test at room temperature

Metallic materials — Tensile testing — Part 1: Method of test at room temperature

Metallic materials — Tensile testing — Part 2: Method of test at elevated temperature

Metallic materials — Tensile testing — Part 2: Method of test at elevated temperature

Metallic materials — Tensile testing — Part 3: Method of test at low temperature

Metallic materials — Tensile testing — Part 4: Method of test in liquid helium

Metallic materials — Tensile testing — Part 5: Specification for testing miniaturised test pieces

Metallic materials — Tensile testing

Metallic materials — Tensile testing at ambient temperature

Metallic materials — Tensile testing — Method for evaluating the susceptibility of materials to the effects of high-pressure gas within hollow test pieces

Metallic materials — Bend test

Metallic materials — Bend test

Metallic materials — Bend test

Metallic materials — Bend test

Metallic materials — Verification of static uniaxial testing machines — Part 1: Tensile testing machines

Metallic materials — Verification of static uniaxial testing machines — Part 1: Tension/compression testing machines — Verification and calibration of the force-measuring system

Metallic materials — Verification of static uniaxial testing machines — Part 1: Tension/compression testing machines — Verification and calibration of the force-measuring system

Metallic materials — Verification of static uniaxial testing machines — Part 1: Tension/compression testing machines — Verification and calibration of the force-measuring system — Technical Corrigendum 1

Metallic materials — Calibration and verification of static uniaxial testing machines — Part 1: Tension/compression testing machines — Calibration and verification of the force-measuring system

Metallic materials — Calibration and verification of static uniaxial testing machines — Part 1: Tension/compression testing machines — Calibration and verification of the force-measuring system

Metallic materials — Verification of static uniaxial testing machines — Part 2: Tension creep testing machines — Verification of the applied load

Metallic materials — Verification of static uniaxial testing machines — Part 2: Tension creep testing machines — Verification of the applied force

Metallic materials — Sheet and strip 3 mm thick or less — Reverse bend test

Metallic materials — Wire — Simple torsion test

Metallic materials — Wire — Simple torsion test

Metallic materials — Wire — Simple torsion test

Metallic materials — Wire — Reverse bend test

Metallic materials — Wire — Reverse bend test

Metallic materials — Wire — Wrapping test

Metallic materials — Wire — Wrapping test

Metallic materials — Sheet and strip — Modified Erichsen cupping test

Metallic materials — Tube (in full section) — Bend test

Metallic materials — Tube (in full section) — Bend test

Metallic materials — Tube — Flattening test

Metallic materials — Tube — Flattening test

Metallic materials — Tube — Flattening test

Metallic materials — Tube — Drift-expanding test

Metallic materials — Tube — Drift-expanding test

Metallic materials — Tube — Flanging test

Metallic materials — Tube — Flanging test

Metallic materials — Tube — Flanging test

Metallic materials — Tube — Ring-expanding test

Metallic materials — Tube — Ring-expanding test

Metallic materials — Tube — Ring-expanding test

Metallic materials — Tube — Ring tensile test

Metallic materials — Tube — Ring tensile test

Metallic materials — Tube — Ring tensile test

Metallic materials — Verification of extensometers used in uniaxial testing

Metallic materials — Calibration of extensometers used in uniaxial testing

Metallic materials — Calibration of extensometers used in uniaxial testing — Technical Corrigendum 1

Metallic materials — Calibration of extensometer systems used in uniaxial testing

Metallic materials — Calibration of extensometer systems used in uniaxial testing — Technical Corrigendum 1

Metallic materials — Wire — Reverse torsion test

Metallic materials — Wire — Reverse torsion test

Metallic materials — Wire — Reverse torsion test

Steel — Conversion of hardness values to tensile strength values

Metallic materials — Sheet and strip — Determination of plastic strain ratio

Metallic materials — Sheet and strip — Determination of plastic strain ratio

Metallic materials — Sheet and strip — Determination of plastic strain ratio

Metallic materials — Hardness testing — Tables of Knoop hardness values for use in tests made on flat surfaces

Metallic materials — Sheet and strip — Determination of tensile strain hardening exponent

Metallic materials — Sheet and strip — Determination of tensile strain hardening exponent

Metallic materials — Sheet and strip — Determination of tensile strain hardening exponent

Metallic materials — Earing test

Metallic materials — Sheet and strip — Earing test

Metallic materials — Sheet and strip — Earing test

Metallic materials — Sheet and strip — Determination of forming-limit curves — Part 1: Measurement and application of forming-limit diagrams in the press shop

Metallic materials — Determination of forming-limit curves for sheet and strip — Part 1: Measurement and application of forming-limit diagrams in the press shop

Metallic materials — Sheet and strip — Determination of forming-limit curves — Part 2: Determination of forming-limit curves in the laboratory

Metallic materials — Determination of forming-limit curves for sheet and strip — Part 2: Determination of forming-limit curves in the laboratory

Metallic materials — Guidelines for the determination of forming-limit diagrams

Metallic materials — Fatigue testing — General principles

Metallic materials — Fatigue testing — Axial-strain-controlled method

Metallic materials — Fatigue testing — Axial-strain-controlled method

Metallic materials — Fatigue testing — Statistical planning and analysis of data

Metallic materials — Fatigue testing — Statistical planning and analysis of data

Metallic materials — Fatigue testing — Fatigue crack growth method

Metallic materials — Fatigue testing — Fatigue crack growth method

Metallic materials — Fatigue testing — Fatigue crack growth method

Metallic materials — Fatigue testing — Variable amplitude fatigue testing — Part 1: General principles, test method and reporting requirements

Metallic materials — Fatigue testing — Variable amplitude fatigue testing — Part 2: Cycle counting and related data reduction methods

Metallic materials — Fatigue testing — Strain-controlled thermomechanical fatigue testing method

Metallic materials — Principles and designs for multiaxial fatigue testing

Metallic materials — Unified method of test for the determination of quasistatic fracture toughness

Metallic materials — Unified method of test for the determination of quasistatic fracture toughness — Technical Corrigendum 1

Metallic materials — Unified method of test for the determination of quasistatic fracture toughness

Metallic materials — Unified method of test for the determination of quasistatic fracture toughness

Mechanical testing of metals — Symbols used with their definitions — Part 1: Symbols and definitions in published standards

Mechanical testing of metals — Symbols used with their definitions — Part 2: Recommendations for the development of symbols and definitions

Metallic materials — Determination of plane-strain fracture toughness

Metallic materials — Determination of plane-strain fracture toughness

Metallic materials — Determination of plane-strain fracture toughness

Mechanical testing of metals — Ductility testing — Compression test for porous and cellular metals

Sintered metal materials excluding hardmetals — Determination of compressive yield strength

Sintered metal materials excluding hardmetals — Determination of compressive yield strength

Steel — Charpy V-notch pendulum impact test — Instrumented test method

Steel — Charpy V-notch pendulum impact test — Instrumented test method — Amendment 1: Annex D — Instrumented Charpy V-notch pendulum impact test of sub-size test pieces

Metallic materials — Charpy V-notch pendulum impact test — Instrumented test method

Metallic materials — Charpy V-notch pendulum impact test — Instrumented test method

Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 1: Test method

Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 1: Test method

Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 1: Test method

Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 2: Verification and calibration of testing machines

Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 2: Verification and calibration of testing machines

Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 2: Verification and calibration of testing machines

Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 3: Calibration of reference blocks

Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 3: Calibration of reference blocks

Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 3: Calibration of reference blocks

Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 4: Test method for metallic and non-metallic coatings

Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 4: Test method for metallic and non-metallic coatings

Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 5: Linear elastic dynamic instrumented indentation testing (DIIT)

Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 6: Instrumented indentation test at elevated temperature

Metallic materials — Hardness test — Universal test

Metallic materials — Strain analysis report

Mechanical tests on metallic materials — Uncertainty in low-cycle fatigue

Measurement uncertainties in mechanical tests on metallic materials — The evaluation of uncertainties in tensile testing

Metallic materials — Tube ring hydraulic pressure test

Metallic materials — Tube ring hydraulic pressure test

Steel forgings — Testing frequency, sampling conditions and test methods for mechanical tests

Steel forgings — Testing frequency, sampling conditions and test methods for mechanical tests

Metallic materials — Tensile testing at low temperature

Metallic materials — Sheet and strip — Hole expanding test

Metallic materials — Method of hole expanding test

Metallic materials — Sheet and strip — Hole expanding test

Metallic materials — Sheet and strip — Hole expanding test

Metallic materials — Sheet and strip — Determination of biaxial stress-strain curve by means of bulge test with optical measuring systems

Metallic materials — Sheet and strip — Determination of biaxial stress-strain curve by means of bulge test with optical measuring systems

Metallic materials — Sheet and strip — Biaxial tensile testing method using a cruciform test piece

Metallic materials — Sheet and strip — Biaxial tensile testing method using a cruciform test piece

Metallic materials — Leeb hardness test — Part 1: Test method

Metallic materials — Leeb hardness test — Part 2: Verification and calibration of the testing devices

Metallic materials — Leeb hardness test — Part 3: Calibration of reference test blocks

Metallic materials — Ductility testing — High speed compression test for porous and cellular metals

Metallic materials — Ductility testing — High speed compression test for porous and cellular metals

Metallic materials — Conversion of hardness values

Metallic materials — Conversion of hardness values

Metallic materials — Torsion test at ambient temperature

Metallic materials — Torsion test at room temperature

Metallic materials — Instrumented indentation test for hardness and materials parameters — Evaluation of stress change using indentation force differences

Metallic materials — Tensile testing in liquid helium

Method for evaluation of tensile properties of metallic superplastic materials

Method for evaluation of tensile properties of metallic superplastic materials

Metallic materials — Steel — Method of test for the determination of brittle crack arrest toughness, Kca

Metallic materials — Steel — Method of test for the determination of brittle crack arrest temperature (CAT)

Metallic materials — Sheet and strip — Erichsen cupping test

Metallic materials — Sheet and strip — Erichsen cupping test

Temperature verification method applied to dynamic fatigue testing

Hardmetals — Knoop hardness test

Metallic materials — Fatigue testing — Axial plane bending method

Metallic materials — Method of test for the determination of resistance to stable crack extension using specimens of low constraint

Metallic materials — Method of test for the determination of resistance to stable crack extension using specimens of low constraint

Metallic materials – Fatigue testing – Force controlled thermo-mechanical fatigue testing method

Metallic materials – Fatigue testing – Force controlled thermo-mechanical fatigue testing method

Metallic materials — Mechanical testing — Vocabulary

Metallic materials — Mechanical testing — Vocabulary

Metallic materials — Verification of the alignment of fatigue testing machines

Metallic materials — High strain rate torsion test at room temperature

Metallic materials — Sheet and strip — Method for springback evaluation in stretch bending

Metallic materials — Sheet and strip — Method for springback evaluation in stretch bending

Mechanical testing of metals — Symbols and definitions in published standards

Metallic materials — Tensile testing at high strain rates — Part 1: Elastic-bar-type systems

Metallic materials — Tensile testing at high strain rates — Part 1: Elastic-bar-type systems

Metallic materials — Tensile testing at high strain rates — Part 1: Elastic-bar-type systems

Metallic materials — Tensile testing at high strain rates — Part 2: Servo-hydraulic and other test systems

Metallic materials — Measurement of fracture toughness at impact loading rates using precracked Charpy-type test pieces

Metallic materials — Method of constraint loss correction of CTOD fracture toughness for fracture assessment of steel components

Metallic materials — Method of constraint loss correction of CTOD fracture toughness for fracture assessment of steel components

Hardmetals — Palmqvist toughness test

Hardmetals — Palmqvist toughness test

Hardmetals — Abrasion tests for hardmetals

Hardmetals — Abrasion tests for hardmetals

Metallic materials — Measurement of mechanical properties by an instrumented indentation test — Indentation tensile properties