Filter :
Standard and/or project | Stage | TC |
---|---|---|
Pipes and fittings of plastics materials — Fittings for domestic and industrial waste pipes — Basic dimensions: Metric series — Part 1: Unplasticized poly(vinyl chloride) (PVC-U)
|
90.93 | ISO/TC 138/SC 1 |
Pipes and fittings of plastics materials — Socket fittings with spigot ends for domestic and industrial waste pipes — Basic dimensions : Metric series
|
95.99 | ISO/TC 138 |
Building and sanitary pipes in asbestos-cement
|
95.99 | ISO/TC 77 |
Asbestos-cement pipe fittings for building and sanitary purposes
|
95.99 | ISO/TC 77 |
Asbestos-cement pipe fittings for building and sanitary purposes
|
95.99 | ISO/TC 77 |
Welded or seamless steel tubes for water, sewage and gas
|
95.99 | ISO/TC 5 |
Steel tubes for water and sewage
|
95.99 | ISO/TC 5/SC 1 |
Asbestos-cement pipes, joints and fittings for sewerage and drainage
|
95.99 | ISO/TC 77 |
Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings for soil and waste discharge (low and high temperature) systems inside buildings — Specifications
|
95.99 | ISO/TC 138/SC 1 |
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings — Unplasticized poly(vinyl chloride) (PVC-U)
|
90.93 | ISO/TC 138/SC 1 |
Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials
|
95.99 | ISO/TC 45/SC 4 |
Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials
|
95.99 | ISO/TC 45/SC 4 |
Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials
|
95.99 | ISO/TC 45/SC 4 |
Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials
|
95.99 | ISO/TC 45/SC 4 |
Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials
|
60.60 | ISO/TC 45/SC 4 |
Plastics piping systems for non-pressure underground conveyance and storage of non-potable water — Arch-shaped, corrugated wall chambers made of PE or PP used for retention, detention, storage and transportation of storm water systems — Product specifications and performance criteria
|
60.60 | ISO/TC 138/SC 1 |
Cast iron drainage pipes and fittings — Spigot series
|
95.99 | ISO/TC 5/SC 2 |
Cast iron drainage pipes and fittings — Spigot series
|
90.60 | ISO/TC 5/SC 2 |
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings — Thermoplastics — Recommended practice for installation
|
90.93 | ISO/TC 138/SC 1 |
Above-ground drainage — Recommended practice and techniques for the installation of unplasticized polyvinyl chloride (PVC-U) sanitary pipework for above-ground systems inside buildings
|
95.99 | ISO/TC 138/SC 1 |
Recommended techniques for the installation of unplasticized poly(vinyl chloride) (PVC-U) buried drains and sewers
|
95.99 | ISO/TC 138/SC 1 |
Performance requirements for plastics pipes and fittings for use in underground drainage and sewage
|
95.99 | ISO/TC 138/SC 1 |
Ductile iron pipes and accessories for non-pressure pipe-lines
|
95.99 | ISO/TC 5/SC 2 |
Polypropylene (PP) pipes and fittings (jointed by means of elastomeric sealing rings) for soil and waste discharge (low and high temperature) systems inside buildings — Specifications
|
95.99 | ISO/TC 138/SC 1 |
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings — Polypropylene (PP)
|
90.20 | ISO/TC 138/SC 1 |
Chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings for soil and waste discharge (low and high temperature) systems inside buildings — Specifications
|
95.99 | ISO/TC 138/SC 1 |
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings — Chlorinated poly(vinyl chloride) (PVC-C)
|
90.93 | ISO/TC 138/SC 1 |
Acrylonitrile/butadiene/styrene (ABS) pipes and fittings for soil and waste discharge (low and high temperature) systems inside buildings — Specifications
|
95.99 | ISO/TC 138/SC 1 |
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings — Acrylonitrile-butadiene-styrene (ABS)
|
90.20 | ISO/TC 138/SC 1 |
Plastics pipes and fittings — Dimensions of sockets and spigots for discharge systems inside buildings — Part 1: Unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly (vinyl chloride) (PVC-C)
|
90.93 | ISO/TC 138/SC 1 |
Plastics pipes and fittings — Dimensions of sockets and spigots for discharge systems inside buildings — Part 2: Polyethylene (PE)
|
90.20 | ISO/TC 138/SC 1 |
Plastics pipes and fittings — Dimensions of sockets and spigots for discharge systems inside buildings — Part 3: Polypropylene (PP)
|
90.93 | ISO/TC 138/SC 1 |
Plastics pipes and fittings — Dimensions of sockets and spigots for discharge systems inside buildings — Part 4: Acrylonitrile/butadiene/styrene (ABS)
|
90.20 | ISO/TC 138/SC 1 |
High-density polyethylene (PE-HD) pipes and fittings for soil and waste discharge (low and high temperature) systems inside buildings — Specifications
|
95.99 | ISO/TC 138/SC 1 |
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings — Polyethylene (PE)
|
90.93 | ISO/TC 138/SC 1 |
High-density polyethylene (PE-HD) pipes and fittings for buried drainage and sewerage systems — Specifications
|
95.99 | ISO/TC 138/SC 1 |
Plastics piping systems for non-pressure underground drainage and sewerage — Polyethylene (PE)
|
90.93 | ISO/TC 138/SC 1 |
Polypropylene (PP) pipes and fittings for buried drainage and sewerage systems — Specifications
|
95.99 | ISO/TC 138/SC 1 |
Plastics piping systems for non-pressure underground drainage and sewerage — Polypropylene (PP)
|
90.93 | ISO/TC 138/SC 1 |
Plastics traps for discharge pipework systems inside buildings
|
90.93 | ISO/TC 138/SC 1 |
Plastics piping systems for pressure and non-pressure drainage and sewerage — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
|
95.99 | ISO/TC 138/SC 6 |
Plastics piping systems for pressure and non-pressure drainage and sewerage — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin — Amendment 1
|
95.99 | ISO/TC 138/SC 6 |
Plastics piping systems for pressure and non-pressure drainage and sewerage — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
|
95.99 | ISO/TC 138/SC 6 |
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 1: General
|
95.99 | ISO/TC 138/SC 8 |
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 1: General
|
90.92 | ISO/TC 138/SC 8 |
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 2: Lining with continuous pipes
|
90.92 | ISO/TC 138/SC 8 |
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 3: Lining with close-fit pipes
|
95.99 | ISO/TC 138/SC 8 |
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 3: Lining with close-fit pipes — Technical Corrigendum 1
|
95.99 | ISO/TC 138/SC 8 |
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 3: Lining with close-fit pipes
|
90.92 | ISO/TC 138/SC 8 |
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 4: Lining with cured-in-place pipes
|
95.99 | ISO/TC 138/SC 8 |
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 4: Lining with cured-in-place pipes
|
90.92 | ISO/TC 138/SC 8 |
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 4: Lining with cured-in-place pipes — Amendment 1: Updated definitions, marking requirements and procedure for alternative expression of flexural test results
|
60.60 | ISO/TC 138/SC 8 |
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 7: Lining with spirally-wound pipes
|
95.99 | ISO/TC 138/SC 8 |
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 7: Lining with spirally-wound pipes
|
90.92 | ISO/TC 138/SC 8 |
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 9: Lining with a rigidly anchored plastics inner layer
|
90.92 | ISO/TC 138/SC 8 |
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part 1: General
|
95.99 | ISO/TC 138/SC 8 |
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part 1: General
|
90.92 | ISO/TC 138/SC 8 |
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part 2: Lining with continuous pipes
|
90.92 | ISO/TC 138/SC 8 |
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part 3: Lining with close-fit pipes
|
95.99 | ISO/TC 138/SC 8 |
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part 3: Lining with close-fit pipes
|
90.92 | ISO/TC 138/SC 8 |
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part 4: Lining with cured-in-place pipes
|
90.92 | ISO/TC 138/SC 8 |
Piping systems for rehabilitation of underground drains, sewers and water supply networks — Part 1: Polyethylene (PE) material
|
40.00 | ISO/TC 138/SC 8 |
Piping systems for rehabilitation of underground drains, sewers and water supply networks — Part 2: Thermoset composite materials
|
40.00 | ISO/TC 138/SC 8 |
Piping systems for rehabilitation of underground drains, sewers and water supply networks — Part 3: Unplasticized poly (vinyl chloride) (PVC-U) material
|
40.00 | ISO/TC 138/SC 8 |
Thermoplastics piping systems for non-pressure applications — Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings — Determination of the viscosity number and K-value
|
90.93 | ISO/TC 138/SC 1 |
Thermoplastics piping systems for non-pressure applications — Test method for watertightness
|
90.93 | ISO/TC 138/SC 1 |
Thermoplastics piping systems for soil and waste discharge inside buildings — Test method for airtightness of joints
|
90.93 | ISO/TC 138/SC 1 |
Thermoplastics piping systems for non-pressure applications — Test method for resistance to elevated temperature cycling
|
95.99 | ISO/TC 138/SC 1 |
Thermoplastics piping systems for non-pressure applications — Test method for resistance to elevated temperature cycling
|
90.93 | ISO/TC 138/SC 1 |
Thermoplastics piping systems for underground non-pressure applications — Test method for leaktightness of elastomeric sealing ring type joints
|
95.99 | ISO/TC 138/SC 1 |
Thermoplastics piping systems for underground non-pressure applications — Test method for leaktightness of elastomeric sealing ring type joints
|
95.99 | ISO/TC 138/SC 1 |
Thermoplastics piping systems for underground non-pressure applications — Test method for leaktightness of elastomeric sealing ring type joints
|
60.60 | ISO/TC 138/SC 1 |
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Test method for resistance to combined temperature cycling and external loading
|
90.93 | ISO/TC 138/SC 1 |
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Test method for resistance to combined temperature cycling and external loading — Amendment 1
|
60.60 | ISO/TC 138/SC 1 |
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics spirally-formed structured-wall pipes — Determination of the tensile strength of a seam
|
90.93 | ISO/TC 138/SC 1 |
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics fittings — Test method for impact strength
|
90.93 | ISO/TC 138/SC 1 |
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics fittings — Test method for mechanical strength or flexibility of fabricated fittings
|
90.93 | ISO/TC 138/SC 1 |
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Joints for buried non-pressure applications — Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure
|
95.99 | ISO/TC 138/SC 1 |
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Joints for buried non-pressure applications — Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure
|
60.60 | ISO/TC 138/SC 1 |
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics shafts or risers for inspection chambers and manholes — Determination of resistance against surface and traffic loading
|
95.99 | ISO/TC 138/SC 1 |
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics shafts or risers for inspection chambers and manholes — Determination of resistance against surface and traffic loading
|
60.60 | ISO/TC 138/SC 1 |
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics inspection chamber and manhole bases — Test methods for buckling resistance
|
95.99 | ISO/TC 138/SC 1 |
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics inspection chamber and manhole bases — Test methods for buckling resistance
|
60.60 | ISO/TC 138/SC 1 |
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics shafts or risers for inspection chambers and manholes — Determination of ring stiffness
|
95.99 | ISO/TC 138/SC 1 |
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics shafts or risers for inspection chambers and manholes — Determination of ring stiffness
|
60.60 | ISO/TC 138/SC 1 |
Plastics piping systems for non-pressure underground drainage and sewerage — Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP), polypropylene with mineral modifiers (PP-MD) and polyethylene (PE) — Specifications for manholes and inspection chambers in traffic areas and underground installations
|
90.92 | ISO/TC 138/SC 1 |
Plastics piping systems for non-pressure underground drainage and sewerage — Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP), polypropylene with mineral modifiers (PP-MD) and polyethylene (PE) — Specifications for manholes and inspection chambers in traffic areas and underground installations
|
30.92 | ISO/TC 138/SC 1 |
Plastics piping systems for drainage and sewerage without pressure — Non-circular pipes and joints made of glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resins (UP) — Dimensions, requirements and tests
|
90.92 | ISO/TC 138/SC 6 |
Plastics piping systems for drainage and sewerage without pressure — Non-circular pipes and joints made of glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resins (UP) — Dimensions, requirements and tests
|
40.20 | ISO/TC 138/SC 6 |
Plastics piping systems for non-pressure drainage and sewerage — Polyester resin concrete (PRC) — Part 1: Pipes and fittings with flexible joints
|
90.93 | ISO/TC 138/SC 6 |
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings — Styrene copolymer blends (SAN + PVC)
|
95.99 | ISO/TC 138/SC 1 |
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings — Styrene copolymer blends (SAN + PVC)
|
60.60 | ISO/TC 138/SC 1 |
Plastics piping systems for non-pressure underground drainage and sewerage — Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) — Part 1: Material specifications and performance criteria for pipes, fittings and system
|
95.99 | ISO/TC 138/SC 1 |
Plastics piping systems for non-pressure underground drainage and sewerage — Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) — Part 1: Material specification and performance criteria for pipes, fittings and systems
|
60.60 | ISO/TC 138/SC 1 |
Plastics piping systems for non-pressure underground drainage and sewerage — Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) — Part 2: Pipes and fittings with smooth external surface, Type A
|
95.99 | ISO/TC 138/SC 1 |
Plastics piping systems for non-pressure underground drainage and sewerage — Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) — Part 2: Pipes and fittings with smooth external surface, Type A
|
60.60 | ISO/TC 138/SC 1 |
Plastics piping systems for non-pressure underground drainage and sewerage — Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) — Part 3: Pipes and fittings with non-smooth external surface, Type B
|
95.99 | ISO/TC 138/SC 1 |
Plastics piping systems for non-pressure underground drainage and sewerage — Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) — Part 3: Pipes and fittings with non-smooth external surface, Type B
|
60.60 | ISO/TC 138/SC 1 |
Plastics piping systems for the trenchless replacement of underground pipeline networks — Part 1: Replacement on the line by pipe bursting and pipe extraction
|
90.92 | ISO/TC 138/SC 8 |
Plastics piping systems for the trenchless replacement of underground pipeline networks — Part 2: Replacement off the line by horizontal directional drilling and impact moling
|
90.92 | ISO/TC 138/SC 8 |
Fibre-reinforced cement pipe, joints and fittings for gravity systems
|
95.99 | ISO/TC 77 |
Elastomeric seals — Requirements for materials for pipe joint seals used in water and drainage applications — Thermoplastic elastomers
|
95.99 | ISO/TC 45/SC 4 |
Elastomeric seals — Requirements for materials for pipe joint seals used in water and drainage applications — Thermoplastic elastomers
|
60.60 | ISO/TC 45/SC 4 |
Plastics piping systems for pressure and non-pressure water supply, drainage or sewerage — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
|
60.60 | ISO/TC 138/SC 6 |
Plastics piping systems for pressure and non-pressure water supply, irrigation, drainage or sewerage — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin — Pipes with flexible joints intended to be installed using jacking techniques
|
90.92 | ISO/TC 138/SC 6 |
No matching records found. Please try changing the filter settings.