Фильтр :
Стандарт и/или проект находящийся в компетенции ISO/TC 17/SC 7 Секретариата Этап ICS
Steel — Hardenability test by end quenching (Jominy test)
95.99
Steel — Hardenability test by end quenching (Jominy test)
90.92
Steel — Hardenability test by end quenching (Jominy test)
10.99
Steels — Micrographic determination of the ferritic or austenitic grain size
95.99
Steels — Micrographic determination of the apparent grain size
95.99
Steels — Micrographic determination of the apparent grain size
95.99
Steels — Micrographic determination of the apparent grain size
90.92
Steels — Micrographic determination of the apparent grain size
30.20
Steel — Determination and verification of the effective depth of carburized and hardened cases
95.99
Steels — Determination and verification of the depth of carburized and hardened cases
95.99
Austenitic stainless steels — Determination of resistance to intergranular corrosion — Part 1: Corrosion test in nitric acid medium by measurement of loss in mass (Huey test)
95.99
Austenitic stainless steels — Determination of resistance to intergranular corrosion — Part 2: Corrosion test in a sulphuric acid/copper sulphate medium in the presence of copper turnings (Monypenny Strauss test)
95.99
Steel — Determination of effective depth of hardening after flame or induction hardening
95.99
Wrought steels — Macroscopic methods for assessing the content of non-metallic inclusions
90.60
Steel, non-alloy and low-alloy — Determination of depth of decarburization
95.99
Steels — Determination of depth of decarburization
95.99
Steels — Determination of the depth of decarburization
90.20
Steel — Determination of content of non-metallic inclusions — Micrographic method using standard diagrams
95.99
Steel — Determination of content of nonmetallic inclusions — Micrographic method using standard diagrams
95.99
Steel — Determination of content of non-metallic inclusions — Micrographic method using standard diagrams
90.93
Steel — Macrographic examination by sulfur print (Baumann method)
95.99
Steel — Macrographic examination by sulphur print (Baumann method)
60.60
Steel — Macroscopic examination by etching with strong mineral acids
95.99
Steel — Etching method for macroscopic examination
90.93
Steel — Determination of total or effective thickness of thin surface-hardened layers
95.99
Tool steels and bearing steels — Micrographic method for assessing the distribution of carbides using reference photomicrographs
90.93
Steels — Manual point counting method for statistically estimating the volume fraction of a constituent with a point grid
90.92
Steels — Manual point counting method for statistically estimating the volume fraction of a constituent with a point grid
30.00
Steel — Metallographic characterization of duplex grain size and distributions
90.93
Steel — Measurement method for the evaluation of hydrogen embrittlement resistance of high strength steels — Part 1: Constant load test
60.60
Steel — Measurement method for the evaluation of hydrogen embrittlement resistance of high-strength steels — Part 2: Slow strain rate test
60.60
Steel — Measurement method for the evaluation of hydrogen embrittlement resistance of high strength steels
95.99
Determination of percentage of resolvable pearlite in high carbon steel wire rod
90.93
Steel — Ultrasonic testing for steel flat products of thickness equal to or greater than 6 mm
95.99
Steel — Ultrasonic testing of steel flat products of thickness equal to or greater than 6 mm
90.93
Steel — Determination of the thickness of surface-hardened layers
90.93
Preparation of metallographic specimens
60.60

По запросу ничего не найдено. Пожалуйста, попробуйте изменить настройки фильтра.