Фильтр :
Стандарт и/или проект находящийся в компетенции ISO/TC 35/SC 9 Секретариата Этап ICS
Paints and varnishes — Sampling
95.99
Paints and varnishes — Sampling of products in liquid or paste form
95.99
Paints and varnishes — Examination and preparation of samples for testing
95.99
Paints and varnishes — Examination and preparation of samples for testing
95.99
Paints and varnishes — Examination and preparation of samples for testing — Technical Corrigendum 1
95.99
Paints and varnishes — Examination and preparation of test samples
90.93
Paints and varnishes — Standard panels for testing
95.99
Paints and varnishes — Standard panels for testing
95.99
Paints and varnishes — Standard panels for testing
95.99
Paints and varnishes — Standard panels for testing
90.92
Paints and varnishes — Standard panels for testing
50.00
Paints and varnishes — Determination of volatile and non-volatile matter
95.99
Paints and varnishes — Surface-drying test — Ballotini method
95.99
Paints and varnishes — Determination of scratch resistance — Part 1: Constant-loading method
95.99
Paints and varnishes — Determination of scratch resistance — Part 1: Constant-loading method
95.99
Paints and varnishes — Determination of scratch resistance — Part 1: Constant-loading method
60.60
Paints and varnishes — Determination of scratch resistance — Part 2: Variable-loading method
95.99
Paints and varnishes — Determination of scratch resistance — Part 2: Variable-loading method
60.60
Paints and varnishes — Scratch test
95.99
Paints and varnishes — Scratch test
95.99
Paints and varnishes — Bend test (cylindrical mandrel)
95.99
Paints and varnishes — Bend test (cylindrical mandrel)
95.99
Paints and varnishes — Bend test (cylindrical mandrel)
90.93
Paints and varnishes — Cupping test
95.99
Paints and varnishes — Cupping test
95.99
Paints and varnishes — Cupping test
90.93
Paints and varnishes — Determination of resistance to water — Water immersion method
95.99
Paints and varnishes — Pendulum damping test
95.99
Paints and varnishes — Pendulum damping test
95.99
Paints and varnishes — Pendulum damping test — Technical Corrigendum 1
95.99
Paints and varnishes — Pendulum damping test
95.99
Paints and varnishes — Pendulum damping test
60.60
Paints and varnishes — Determination of fineness of grind
95.99
Paints, varnishes and printing inks — Determination of fineness of grind
95.99
Paints, varnishes and printing inks — Determination of fineness of grind
95.99
Paints, varnishes and printing inks — Determination of fineness of grind
60.60
Paints and varnishes — Cross-cut test
95.99
Paints and varnishes — Cross-cut test
95.99
Paints and varnishes — Cross-cut test
95.99
Paints and varnishes — Cross-cut test
95.99
Paints and varnishes — Cross-cut test
60.60
Paints and varnishes — Determination of flow time by use of flow cups
95.99
Paints and varnishes — Determination of flow time by use of flow cups
95.99
Paints and varnishes — Determination of flow time by use of flow cups — Technical Corrigendum 1
95.99
Paints and varnishes — Determination of flow time by use of flow cups — Technical Corrigendum 2
95.99
Paints and varnishes — Determination of flow time by use of flow cups
95.99
Paints and varnishes — Determination of flow time by use of flow cups
60.60
Paints and varnishes — Determination of film thickness
95.99
Paints and varnishes — Determination of film thickness
95.99
Paints and varnishes — Determination of film thickness
95.99
Paints and varnishes — Determination of film thickness
95.99
Paints and varnishes — Determination of film thickness
60.60
Paints and varnishes — Determination of light fastness of paints for interior use
95.99
Paints and varnishes — Notes for guidance on the conduct of natural weathering tests
95.99
Paints and varnishes — Natural weathering of coatings — Exposure and assessment
95.99
Paints and varnishes — Natural weathering of coatings — Exposure and assessment
60.60
Paints and varnishes — Determination of density — Part 1: Pyknometer method
95.99
Paints and varnishes — Determination of density — Part 1: Pyknometer method
95.99
Paints and varnishes — Determination of density — Part 1: Pycnometer method
95.99
Paints and varnishes — Determination of density — Part 1: Pycnometer method
60.60
Paints and varnishes — Determination of density — Part 2: Immersed body (plummet) method
95.99
Paints and varnishes — Determination of density — Part 2: Immersed body (plummet) method
90.93
Paints and varnishes — Determination of density — Part 3: Oscillation method
95.99
Paints and varnishes — Determination of density — Part 3: Oscillation method
95.99
Paints and varnishes — Determination of density — Part 3: Oscillation method
60.60
Paints and varnishes — Determination of density — Part 4: Pressure cup method
95.99
Paints and varnishes — Determination of density — Part 4: Pressure cup method
90.93
Paints and varnishes — Determination of density
95.99
Paints and varnishes — Determination of resistance to liquids — Part 1: General methods
95.99
Paints and varnishes — Determination of resistance to liquids — Part 1: Immersion in liquids other than water
95.99
Paints and varnishes — Determination of resistance to liquids — Part 1: Immersion in liquids other than water
90.93
Paints and varnishes — Determination of resistance to liquids — Part 2: Water immersion method
95.99
Paints and varnishes — Determination of resistance to liquids — Part 2: Water immersion method
95.99
Paints and varnishes — Determination of resistance to liquids — Part 2: Water immersion method
90.60
Paints and varnishes — Determination of resistance to liquids — Part 3: Method using an absorbent medium
95.99
Paints and varnishes — Determination of resistance to liquids — Part 3: Method using an absorbent medium
95.99
Paints and varnishes — Determination of resistance to liquids — Part 3: Method using an absorbent medium
60.60
Paints and varnishes — Determination of resistance to liquids — Part 4: Spotting methods
95.99
Paints and varnishes — Determination of resistance to liquids — Part 4: Spotting methods
90.93
Paints and varnishes — Determination of resistance to liquids — Part 5: Temperature-gradient oven method
95.99
Paints and varnishes — Determination of resistance to liquids — Part 5: Temperature-gradient oven method
90.93
Paints and varnishes — Determination of resistance to liquids
95.99
Paints and varnishes — Measurement of specular gloss of non-metallic paint films at 20 degrees, 60 degrees and 85 degrees
95.99
Paints and varnishes — Determination of specular gloss of non-metallic paint films at 20 degrees, 60 degrees and 85 degrees
95.99
Paints and varnishes — Determination of specular gloss of non-metallic paint films at 20 degrees, 60 degrees and 85 degrees — Technical Corrigendum 1
95.99
Paints and varnishes — Determination of gloss value at 20°, 60° and 85°
90.93
Paints and varnishes — Comparison of contrast ratio (hiding power) of paints of the same type and colour
95.99
Paints and varnishes — Buchholz indentation test
95.99
Paints and varnishes — Buchholz indentation test
90.93
Paints and varnishes — Determination of viscosity using rotary viscometers — Part 1: Cone-and-plate viscometer operated at a high rate of shear
90.92
Paints and varnishes — Determination of viscosity using rotational viscometers — Part 1: Absolute viscosity measurement with cone-plate measuring geometry at high shear rates
40.99
Paints and varnishes — Determination of viscosity using rotary viscometers — Part 2: Disc or ball viscometer operated at a specified speed
90.92
Paints and varnishes — Determination of viscosity using rotational viscometers — Part 2: Relative measurement of viscosity using disc or ball spindles at specified speeds
40.99
Paints and varnishes — Determination of viscosity at a high rate of shear
95.99
Paints and varnishes — Large scale brushing test
95.99
Rheology — Part 1: Vocabulary and symbols for rotational and oscillatory rheometry
60.60
Rheology — Part 2: General principles of rotational and oscillatory rheometry
60.60
Plastics — Polymers/resins in the liquid state or as emulsions or dispersions — Determination of viscosity using a rotational viscometer with defined shear rate
95.99
Paints and varnishes — Determination of resistance to humid atmospheres containing sulphur dioxide
95.99
Paints and varnishes — Determination of quantity of material in a container
95.99
Paints and varnishes — Determination of the percentage volume of non-volatile matter — Part 1: Method using a coated test panel to determine non-volatile matter and to determine dry film density by the Archimedes principle
95.99
Paints and varnishes — Determination of percentage volume of non-volatile matter — Part 1: Method using a coated test panel to determine non-volatile matter and to determine dry-film density by the Archimedes' principle
60.60
Paints and varnishes — Determination of the percentage volume of non-volatile matter — Part 2: Method using the determination of non-volatile-matter content in accordance with ISO 3251 and determination of dry film density on coated test panels by the Archimedes principle
95.99
Paints and varnishes — Determination of the percentage volume of non-volatile matter — Part 2: Method using the determination of non-volatile-matter content in accordance with ISO 3251 and determination of dry film density on coated test panels by the Archimedes' principle
60.60
Paints and varnishes — Determination of the percentage volume of non-volatile matter — Part 3: Determination by calculation from the non-volatile-matter content determined in accordance with ISO 3251, the density of the coating material and the density of the solvent in the coating material
90.93
Paints and varnishes — Determination of volume of dry coating (non-volatile matter) obtained from a given volume of liquid coating
95.99
Paints and varnishes — Determination of percentage volume of non-volatile matter by measuring the density of a dried coating
95.99
Paints and varnishes — Determination of percentage volume of non-volatile matter by measuring the density of a dried coating — Technical Corrigendum 1
95.99
Paints and varnishes — Determination of the effect of heat
95.99
Paints and varnishes — Determination of the effect of heat
95.99
Paints and varnishes — Determination of the effect of heat
90.93
Paints, varnishes and plastics — Determination of non-volatile-matter content
60.60
Paints and varnishes and their raw materials — Temperatures and humidities for conditioning and testing
90.93
Paints and varnishes — Visual comparison of the colour of paints
95.99
Paints and varnishes — Visual comparison of the colour of paints
95.99
Paints and varnishes — Visual comparison of colour of paints
90.93
Paints and varnishes — Print-free test
95.99
Paints and varnishes — Determination of contrast ratio (opacity) of light coloured paints at a fixed spreading rate (using black and white charts)
95.99
Paints and varnishes — Determination of contrast ratio (opacity) of light coloured paints at a fixed spreading rate (using black and white charts) — Amendment 1
95.99
Paints and varnishes — Determination of contrast ratio (opacity) of light coloured paints at a fixed spreading rate (using polyester film)
95.99
Paints and varnishes — Determination of contrast ratio (opacity) of light coloured paints at a fixed spreading rate (using polyester film) — Amendment 1
95.99
Paints and varnishes — Pressure test for stackability
95.99
Paints and varnishes — Pressure test for stackability
95.99
Paints and varnishes — Determination of resistance to filiform corrosion — Part 1: Steel substrates
95.99
Paints and varnishes — Determination of resistance to filiform corrosion — Part 1: Steel substrates
90.60
Paints and varnishes — Determination of resistance to filiform corrosion — Part 2: Aluminium substrates
95.99
Paints and varnishes — Determination of resistance to filiform corrosion — Part 2: Aluminium substrates — Technical Corrigendum 1
95.99
Paints and varnishes — Determination of resistance to filiform corrosion — Part 2: Aluminium substrates
90.93
Paints and varnishes — Filiform corrosion test on steel
95.99
Paints and varnishes — Pull-off test for adhesion
95.99
Paints and varnishes — Pull-off test for adhesion
95.99
Paints and varnishes — Pull-off test for adhesion
95.99
Paints and varnishes — Pull-off test for adhesion
60.60
Paints and varnishes — Evaluation of the compatibility of a product with a surface to be painted — Methods of test
95.99
Paints and varnishes — Evaluation of degradation of paint coatings — Designation of quantity and size of common types of defect — Part 1: General principles and pictorial scales for blistering and rusting
95.99
Paints and varnishes — Evaluation of degradation of paint coatings — Designation of intensity, quantity and size of common types of defect — Part 1: General principles and rating schemes
95.99
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 1: General introduction and designation system
95.99
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 1: General introduction and designation system
90.93
Paints and varnishes — Evaluation of degradation of paint coatings — Designation of intensity, quantity and size of common types of defect — Part 2: Designation of degree of blistering
95.99
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 2: Assessment of degree of blistering
95.99
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 2: Assessment of degree of blistering
90.93
Paints and varnishes — Evaluation of degradation of paint coatings — Designation of intensity, quantity and size of common types of defect — Part 3: Designation of degree of rusting
95.99
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 3: Assessment of degree of rusting
95.99
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 3: Assessment of degree of rusting
90.92
Paints and varnishes — Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 3: Assessment of degree of rusting
40.99
Paints and varnishes — Evaluation of degradation of paint coatings — Designation of intensity, quantity and size of common types of defect — Part 4: Designation of degree of cracking
95.99
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 4: Assessment of degree of cracking
95.99
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 4: Assessment of degree of cracking
90.93
Paints and varnishes — Evaluation of degradation of paint coatings — Designation of intensity, quantity and size of common types of defect — Part 5: Designation of degree of flaking
95.99
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 5: Assessment of degree of flaking
95.99
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 5: Assessment of degree of flaking
95.99
Paints and varnishes — Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 5: Assessment of degree of flaking
60.60
Paints and varnishes — Evaluation of degradation of paint coatings — Designation of intensity, quantity and size of common types of defect — Part 6: Rating of degree of chalking by tape method
95.99
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 6: Assessment of degree of chalking by tape method
95.99
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 6: Assessment of degree of chalking by tape method
95.99
Paints and varnishes — Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 6: Assessment of degree of chalking by tape method
60.60
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 7: Assessment of degree of chalking by velvet method
95.99
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 7: Assessment of degree of chalking by velvet method
90.93
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 8: Assessment of degree of delamination and corrosion around a scribe
95.99
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 8: Assessment of degree of delamination and corrosion around a scribe or other artificial defect
90.93
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 10: Assessment of degree of filiform corrosion
95.99
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 10: Assessment of degree of filiform corrosion
95.99
Paints and varnishes — Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 10: Assessment of degree of filiform corrosion
60.60
Sources of error in the use of electrochemical impedance spectroscopy for the investigation of coatings and other materials
60.60
Electrochemical noise measurement for assessing the protection of metal afforded by organic coatings
60.60
Paints and varnishes — Determination of resistance to humidity — Part 1: Continuous condensation
95.99
Paints and varnishes — Determination of resistance to humidity — Part 1: Condensation (single-sided exposure)
90.93
Paints and varnishes — Determination of resistance to humidity — Part 2: Procedure for exposing test specimens in condensation-water atmospheres
95.99
Paints and varnishes — Determination of resistance to humidity — Part 2: Condensation (in-cabinet exposure with heated water reservoir)
90.92
Paints and varnishes — Determination of resistance to humidity — Part 2: Condensation (in-cabinet exposure with heated water reservoir)
30.60
Paints and varnishes — Determination of resistance to humidity — Part 3: Condensation (in-cabinet exposure with heated, bubbling water reservoir)
90.93
Paints and varnishes — Determination of resistance to humidity (continuous condensation)
95.99
Paints and varnishes — Rapid-deformation (impact resistance) tests — Part 1: Falling-weight test, large-area indenter
95.99
Paints and varnishes — Rapid-deformation (impact resistance) tests — Part 1: Falling-weight test, large-area indenter
90.93
Paints and varnishes — Rapid-deformation (impact resistance) tests — Part 2: Falling-weight test, small-area indenter
95.99
Paints and varnishes — Rapid-deformation (impact resistance) tests — Part 2: Falling-weight test, small-area indenter
90.93
Paints and varnishes — Falling-weight test
95.99
Paints and varnishes — Falling weight test
95.99
Paints and varnishes — Determination of micro-indentation hardness — Part 1: Knoop hardness by measurement of indentation length
95.99
Paints and varnishes — Determination of micro-indentation hardness — Part 2: Knoop hardness by measurement of indentation depth under load
95.99
Paints and varnishes — Indentation test (spherical or pyramidal)
95.99
Paints and varnishes — Determination of hiding power — Part 1: Kubelka-Munk method for white and light-coloured paints
95.99
Paints and varnishes — Determination of hiding power — Part 1: Kubelka-Munk method for white and light-coloured paints
60.60
Paints and varnishes — Determination of hiding power — Part 3: Determination of contrast ratio (opacity) of light-coloured paints at a fixed spreading rate
95.99
Paints and varnishes — Determination of hiding power — Part 3: Determination of contrast ratio of light-coloured paints at a fixed spreading rate
95.99
Paints and varnishes — Determination of hiding power — Part 3: Determination of hiding power of paints for masonry, concrete and interior use
60.60
Paints and varnishes — Preparation of acid extracts from dried paint films
95.99
Paints and varnishes — Bend test (conical mandrel)
95.99
Paints and varnishes — Bend test (conical mandrel)
90.93
Paints and varnishes — Determination of resistance to neutral salt spray
95.99
Paints and varnishes — Determination of resistance to neutral salt spray (fog)
95.99
Paints and varnishes — Assessment of natural spreading rate — Brush application
95.99
Paints and varnishes — Colorimetry — Part 1: Principles
95.99
Paints and varnishes — Colorimetry — Part 2: Colour measurement
95.99
Paints and varnishes — Colorimetry — Part 3: Calculation of colour differences
95.99
Paints and varnishes — Determination of water-vapour transmission rate — Part 1: Dish method for free films
95.99
Paints and varnishes — Determination of water-vapour transmission rate — Part 1: Dish method for free films — Technical Corrigendum 1
95.99
Paints and varnishes — Coating materials and coating systems for exterior masonry and concrete — Part 2: Determination and classification of water-vapour transmission rate (permeability)
95.99
Paints and varnishes — Determination of water-vapour transmission properties — Cup method
95.99
Paints and varnishes — Determination of water-vapour transmission properties — Cup method
90.93
Paints and varnishes — Determination of resistance to abrasion — Part 1: Rotating abrasive-paper-covered wheel method
95.99
Paints and varnishes — Determination of resistance to abrasion — Part 1: Method with abrasive-paper covered wheels and rotating test specimen
95.99
Paints and varnishes — Determination of resistance to abrasion — Part 1: Method with abrasive-paper covered wheels and rotating test specimen
60.60
Paints and varnishes — Determination of resistance to abrasion — Part 2: Rotating abrasive rubber wheel method
95.99
Paints and varnishes — Determination of resistance to abrasion — Part 2: Method with abrasive rubber wheels and rotating test specimen
95.99
Paints and varnishes — Determination of resistance to abrasion — Part 2: Method with abrasive rubber wheels and rotating test specimen
60.60
Paints and varnishes — Determination of resistance to abrasion — Part 3: Reciprocating test panel method
95.99
Paints and varnishes — Determination of resistance to abrasion — Part 3: Method with abrasive-paper covered wheel and linearly reciprocating test specimen
95.99
Paints and varnishes — Determination of resistance to abrasion — Part 3: Method with abrasive-paper covered wheel and linearly reciprocating test specimen
60.60
Paints and varnishes — Coating of test panels at a specified spreading rate — Brush application
95.99
Coating powders — Part 1: Determination of particle size distribution by sieving
95.99
Coating powders — Part 1: Determination of particle size distribution by sieving
60.60
Coating powders — Part 2: Determination of density by gas comparison pyknometer (referee method)
95.99
Coating powders — Part 2: Determination of density by gas comparison pycnometer (referee method)
60.60
Coating powders — Part 3: Determination of density by liquid displacement pyknometer
95.99
Coating powders — Part 3: Determination of density by liquid displacement pycnometer
60.60
Coating powders — Part 4: Calculation of lower explosion limit
95.99
Coating powders — Part 4: Calculation of lower explosion limit — Technical Corrigendum 1
60.60
Coating powders — Part 4: Calculation of lower explosion limit
60.60
Coating powders — Part 5: Determination of flow properties of a powder/air mixture
95.99
Coating powders — Part 5: Determination of flow properties of a powder/air mixture
60.60
Coating powders — Part 6: Determination of gel time of thermosetting coating powders at a given temperature
95.99
Coating powders — Part 6: Determination of gel time of thermosetting coating powders at a given temperature — Amendment 1
95.99
Coating powders — Part 6: Determination of gel time of thermosetting coating powders at a given temperature
60.60
Coating powders — Part 7: Determination of loss of mass on stoving
95.99
Coating powders — Part 7: Determination of loss of mass on stoving
60.60
Coating powders — Part 8: Assessment of the storage stability of thermosetting powders
95.99
Coating powders — Part 8: Assessment of the storage stability of thermosetting powders
60.60
Coating powders — Part 9: Sampling
95.99
Coating powders — Part 10: Determination of deposition efficiency
95.99
Coating powders — Part 10: Determination of deposition efficiency
60.60
Coating powders — Part 11: Inclined-plane flow test
95.99
Coating powders — Part 11: Inclined-plane flow test
60.60
Coating powders — Part 12: Determination of compatibility
95.99
Coating powders — Part 12: Determination of compatibility
60.60
Coating powders — Part 13: Particle size analysis by laser diffraction
95.99
Coating powders — Part 13: Particle size analysis by laser diffraction
60.60
Coating powders — Part 14: Terminology
95.99
Coating powders — Part 14: Vocabulary
60.60
Coating powders — Part 15: Rheology
60.60
Coating powders — Part 16: Determination of density by liquid displacement in a measuring cylinder
60.60
Test for sustained combustibility of liquids
95.99
Paints and varnishes — Determination of the ability of liquid paints to sustain combustion
95.99
Paints and varnishes — Drying tests — Part 1: Determination of through-dry state and through-dry time
90.93
Paints and varnishes — Drying tests — Part 2: Pressure test for stackability
90.93
Paints and varnishes — Drying tests — Part 3: Surface-drying test using ballotini
90.93
Paints and varnishes — Drying tests — Part 4: Test using a mechanical recorder
90.93
Paints and varnishes — Drying tests — Part 5: Modified Bandow-Wolff test
90.93
Paints and varnishes — Drying tests — Part 6: Print-free test
90.93
Paints and varnishes — Determination of through-dry state and through-dry time — Method of test
95.99
Paints and varnishes — Thermal performance of paint films — Determination of solar irradiation penetration ratio with heat flow meter
30.98
Paints and varnishes — Determination of the pot-life of liquid systems — Preparation and conditioning of samples and guidelines for testing
95.99
Paints and varnishes — Determination of the pot life of multicomponent coating systems — Preparation and conditioning of samples and guidelines for testing
95.99
Paints and varnishes — Determination of the pot life of multicomponent coating systems — Preparation and conditioning of samples and guidelines for testing
60.60
Paints and varnishes — Modelling of biocide release rate from antifouling paints by mass-balance calculation
90.93
Paints and varnishes — Artificial weathering and exposure to artificial radiation — Exposure to filtered xenon-arc radiation
95.99
Paints and varnishes — Artificial weathering and exposure to artificial radiation — Exposure to filtered xenon-arc radiation
95.99
Paints and varnishes — Determination of resistance to humidity (intermittent condensation)
90.93
Paints and varnishes — Exposure of coatings to artificial weathering — Exposure to fluorescent UV and water
95.99
Paints and varnishes — Exposure of coatings to artificial weathering — Exposure to fluorescent UV lamps and water
95.99
Best practices for the creation/evaluation of fingerprint analysis in accordance with the ISO 28199 series
60.60
Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 1: Wet (salt fog)/dry/humidity
95.99
Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 1: Wet (salt fog)/dry/humidity — Technical Corrigendum 1
95.99
Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 1: Wet (salt fog)/dry/humidity
95.99
Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 1: Wet (salt fog)/dry/humid
90.92
Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 1: Wet (salt fog)/dry/humid
30.00
Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 2: Wet (salt fog)/dry/humidity/UV light
95.99
Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 2: Wet (salt fog)/dry/humidity/UV light
90.92
Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 2: Wet (salt fog)/dry/humidity/UV light
30.00
Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 3: Testing of coating systems on materials and components in automotive construction
60.60
Paints and varnishes — Determination of wet-scrub resistance and cleanability of coatings
95.99
Paints and varnishes — Determination of wet-scrub resistance and cleanability of coatings
90.93
Paints and varnishes — Determination of wet-scrub resistance of coatings
30.98
Paints and varnishes — Determination of curing characteristics using a free damped oscillation method — Part 1: Start temperature of the curing reaction
90.93
Paints and varnishes — Determination of curing characteristics using a free damped oscillation method — Part 2: Glass transition temperature
90.93
Paints and varnishes — Determination of mar resistance — Part 1: Method using a curved stylus
95.99
Paints and varnishes — Determination of mar resistance — Part 1: Method using a curved stylus — Technical Corrigendum 1
95.99
Paints and varnishes — Determination of mar resistance — Part 2: Method using a pointed stylus
95.99
Paints and varnishes — Determination of mar resistance
90.93
Paints and varnishes — Lighting and procedure for visual assessments of coatings
95.99
Paints and varnishes — Lighting and procedure for visual assessments of coatings
60.60
Paints and varnishes — Electrochemical measurement of the protection provided to steel by paint coatings — Current interrupter (CI) technique, relaxation voltammetry (RV) technique and DC transient (DCT) measurements
90.93
Paints and varnishes — Determination of reflection haze on paint films at 20 degrees
95.99
Paints and varnishes — Determination of haze on paint films at 20°
90.93
Paints and varnishes — Determination of pigment content — Part 1: Centrifuge method
90.93
Paints and varnishes — Determination of pigment content — Part 2: Ashing method
90.93
Paints and varnishes — Determination of pigment content — Part 3: Filtration method
90.93
Paints and varnishes — Determination of electrical conductivity and resistance
95.99
Paints and varnishes — Determination of electrical conductivity and resistance
60.60
Paints and varnishes — Artificial weathering including acidic deposition
95.99
Paints and varnishes — Artificial weathering including acidic deposition
90.93
Paints and varnishes — Determination of release rate of biocides from antifouling paints — Part 1: General method for extraction of biocides
95.99
Paints and varnishes — Determination of release rate of biocides from antifouling paints — Part 1: General method for extraction of biocides
90.93
Paints and varnishes — Determination of release rate of biocides from antifouling paints — Part 2: Determination of copper-ion concentration in the extract and calculation of the release rate
95.99
Paints and varnishes — Determination of release rate of biocides from antifouling paints — Part 2: Determination of copper-ion concentration in the extract and calculation of the release rate
90.93
Paints and varnishes — Determination of release rate of biocides from antifouling paints — Part 3: Calculation of the zinc ethylene-bis(dithiocarbamate) (zineb) release rate by determination of the concentration of ethylenethiourea in the extract
90.93
Paints and varnishes — Determination of release rate of biocides from antifouling paints — Part 4: Determination of pyridine-triphenylborane (PTPB) concentration in the extract and calculation of the release rate
90.93
Paints and varnishes — Determination of release rate of biocides from antifouling paints — Part 5: Calculation of the tolylfluanid and dichlofluanid release rate by determination of the concentration of dimethyltolylsulfamide (DMST) and dimethylphenylsulfamide (DMSA) in the extract
90.93
Paints and varnishes — Determination of release rate of biocides from antifouling paints — Part 6: Determination of tralopyril release rate by quantitation of its degradation product in the extract
90.93
Paints and varnishes — Determination of film hardness by pencil test
95.99
Paints and varnishes — Determination of film hardness by pencil test
95.99
Paints and varnishes — Determination of film hardness by pencil test
60.60
Paints and varnishes — Testing of formaldehyde-emitting coatings and melamine foams — Determination of the steady-state concentration of formaldehyde in a small test chamber
90.93
Paints, varnishes and raw materials for paints and varnishes — Sampling
95.99
Paints, varnishes and raw materials for paints and varnishes — Sampling
95.99
Paints, varnishes and raw materials for paints and varnishes — Sampling
60.60
Paints and varnishes — Corrosion testing by alternate immersion in and removal from a buffered sodium chloride solution
90.93
Paints and varnishes — Determination of resistance to cathodic disbonding of coatings exposed to sea water
90.93
Paints and varnishes — Coating materials and coating systems for exterior wood — Part 2: Exposure of wood coatings to artificial weathering using fluorescent UV lamps and water
60.60
Paints and varnishes — Coating materials and coating systems for exterior wood — Natural weathering test
95.99
Paints and varnishes — Coating materials and coating systems for exterior wood — Natural weathering test
95.99
Paints and varnishes — Coating materials and coating systems for exterior wood — Natural weathering test
95.99
Paints and varnishes — Coating materials and coating systems for exterior wood — Natural weathering test
60.60
Paints and varnishes — Methods of exposure to laboratory light sources — Part 1: General guidance
90.93
Paints and varnishes — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps
90.93
Paints and varnishes — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps — Amendment 1: Classification of daylight filters
60.60
Paints and varnishes — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps
95.99
Paints and varnishes — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps
60.60
Paints and varnishes — Methods of exposure to laboratory light sources — Part 4: Open-flame carbon-arc lamps
90.93
Paints and varnishes — Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens — Part 1: Terms and definitions
95.99
Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens — Part 1: Terms and definitions
90.93
Paints and varnishes — Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens — Part 2: Collection of data
95.99
Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens — Part 2: Collection of data
90.93
Paints and varnishes — Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens — Part 3: Processing and analysis of data from dummy cells
95.99
Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens — Part 3: Processing and analysis of data from dummy cells
90.93
Paints and varnishes — Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens — Part 4: Examples of spectra of polymer-coated specimens
95.99
Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens — Part 4: Examples of spectra of polymer-coated and uncoated specimens
90.93
Paints and varnishes — Evaluation of sag resistance
90.93
Paints and varnishes — Determination of the resistance of coatings to pressure water-jetting
95.99
Paints and varnishes — Determination of the resistance of coatings to pressure water-jetting
60.60
Paints and varnishes — Determination of the overcoatability and recoatability of a coating
90.93
Paints and varnishes — T-bend test
90.93
Paints and varnishes — Guidelines for the determination of anticorrosive properties of organic coatings by accelerated cyclic electrochemical technique
95.99
Paints and varnishes — Guidelines for the determination of anticorrosive properties of organic coatings by accelerated cyclic electrochemical technique
60.60
Paints and varnishes — Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing
95.99
Paints and varnishes — Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing
60.60
Paints and varnishes — Coating systems for wind-turbine rotor blades — Part 1: Minimum requirements and weathering
90.93
Paints and varnishes — Coating systems for wind-turbine rotor blades — Part 2: Determination and evaluation of resistance to rain erosion using rotating arm
90.93
Paints and varnishes — Coating systems for wind-turbine rotor blades — Part 3: Determination and evaluation of resistance to rain erosion using water jet
90.93
Paints and varnishes — Coating systems for wind-turbine rotor blades — Part 5: Measurement of transmittance properties of UV protective coatings
60.60
Paints and varnishes — Coating systems for wind-turbine rotor blades — Part 6: Determination and evaluation of ice adhesion using centrifuge
60.60
Paints and varnishes — Determination of pH value — Part 1: pH electrodes with glass membrane
90.92
Paints and varnishes — Determination of pH value — Part 1: pH electrodes with glass membrane
30.60
Paints and varnishes — Determination of pH value — Part 2: pH electrodes with ISFET technology
90.92
Paints and varnishes — Determination of pH value — Part 2: pH electrodes with ISFET technology
30.60
Paints and varnishes — Determination of the film thickness of coatings using an ultrasonic gauge
40.60
Determination of the film thickness of coatings using an ultrasonic gage
90.92
Paints and varnishes — Wedge-cut method for determination of film thickness (scribe and drill method)
90.93
Paints and varnishes — Adhesion of coatings
60.60
Paints and varnishes — Wettability — Part 1: Terminology and general principles
95.99
Paints and varnishes — Wettability — Part 1: Vocabulary and general principles
60.60
Paints and varnishes — Wettability — Part 2: Determination of the surface free energy of solid surfaces by measuring the contact angle
90.92
Paints and varnishes — Wettability — Part 2: Determination of the surface free energy of solid surfaces by measuring the contact angle
40.99
Paints and varnishes — Wettability — Part 3: Determination of the surface tension of liquids using the pendant drop method
90.92
Paints and varnishes — Wettability — Part 3: Determination of the surface tension of liquids using the pendant drop method
40.99
Paints and varnishes — Wettability — Part 4: Determination of the polar and dispersive fractions of the surface tension of liquids from an interfacial tension
90.92
Paints and varnishes — Wettability — Part 4: Determination of the polar and dispersive fractions of the surface tension of liquids from an interfacial tension
40.99
Paints and varnishes — Wettability — Part 5: Determination of the polar and dispersive fractions of the surface tension of liquids from contact angles measurements on a solid with only a disperse contribution to its surface energy
90.92
Paints and varnishes — Wettability — Part 5: Determination of the polar and dispersive fractions of the surface tension of liquids from contact angles measurements on a solid with only a disperse contribution to its surface energy
40.99
Paints and varnishes — Wettability — Part 6: Measurement of dynamic contact angle
90.92
Paints and varnishes — Wettability — Part 6: Measurement of dynamic contact angle
40.99
Paints and varnishes — Wettability — Part 7: Measurement of the contact angle on a tilt stage (roll-off angle)
90.92
Paints and varnishes — Wettability — Part 7: Measurement of the dynamic contact angles and the roll-off angle on a tilt stage
40.99
Paints and varnishes — Determination of image clarity (degree of sharpness of reflected or transmitted image)
90.93
Paints and varnishes — Determination of the scratch resistance of a coating system using a laboratory car-wash
95.99
Paints and varnishes — Determination of the scratch resistance of a coating system using a laboratory-scale car-wash
95.99
Paints and varnishes — Determination of the scratch resistance of a coating system using a laboratory-scale car-wash
60.60
Paints and varnishes — Determination of stone-chip resistance of coatings — Part 1: Multi-impact testing
95.99
Paints and varnishes — Determination of stone-chip resistance of coatings — Part 1: Multi-impact testing
90.93
Paints and varnishes — Determination of stone-chip resistance of coatings — Part 2: Single-impact test with a guided impact body
95.99
Paints and varnishes — Determination of stone-chip resistance of coatings — Part 2: Single-impact test with a guided impact body
95.99
Paints and varnishes — Determination of stone-chip resistance of coatings — Part 2: Single-impact test with a guided impact body
60.60
Paints and varnishes — Determination of stone-chip resistance of coatings — Part 3: Single-impact test with a free-flying impact body
90.93
Paints and varnishes — Determination of stone-chip resistance of coatings — Part 4: Mobile multi-impact testing on a small testing area
60.60
Rheological test methods — Fundamentals and interlaboratory comparisons — Part 1: Determination of the yield point
60.60
Rheological test methods — Fundamentals and interlaboratory comparisons — Part 2: Determination of the time-dependent structural change (thixotropy)
60.60
Paints and varnishes — Evaluation of defects on coated surfaces using optical imaging — Part 1: General guidance
90.92
Paints and varnishes — Evaluation of defects on coated surfaces using optical imaging — Part 1: General guidance
20.00
Paints and varnishes — Evaluation of defects on coated surfaces using optical imaging — Part 2: Evaluation procedure for multi-impact stone-chipping test
90.93
Paints and varnishes — Evaluation of defects on coated surfaces using optical imaging — Part 3: Evaluation of delamination and corrosion around a scribe
90.93
Paints and varnishes — Evaluation of defects on coated surfaces using optical imaging — Part 4: Evaluation of filiform corrosion
90.92
Paints and varnishes — Evaluation of defects on coated surfaces using optical imaging — Part 4: Evaluation of filiform corrosion
20.00
Paints and varnishes — Determination of settling
90.60
Paints and varnishes — Determination of the resistance to rubbing using a linear abrasion tester (crockmeter)
90.20
Paints and varnishes - Overview of test methods on hardness and wear resistance of coatings
60.60
Paints and varnishes — Practical determination of non-volatile and volatile matter content during application
60.60
Paints and varnishes — Electro-deposition coatings — Part 1: Vocabulary
60.60
Paints and varnishes — Electro-deposition coatings — Part 2: Throwing power
60.60
Paints and varnishes — Electro-deposition coatings — Part 3: Compatibility of electro-deposition coating materials with a reference oil
60.60
Paints and varnishes — Electro-deposition coatings — Part 4: Compatibility of electro-deposition coating materials with liquid, paste-like and solid foreign materials
60.60
Paints and varnishes — Electro-deposition coatings — Part 5: Determination of sieve residue
60.60
Paints and varnishes — Electro-deposition coatings — Part 6: Entry marks
60.60
Paints and varnishes — Electro-deposition coatings — Part 7: Electrical wet-film resistance
60.60
Paints and varnishes — Electro-deposition coatings — Part 8: Electric charge density
60.60
Paints and varnishes — Electro-deposition coatings — Part 9: Stoving loss
60.60
Paints and varnishes — Electro-deposition coatings — Part 10: Edge protection
60.60
Paints and varnishes — Electro-deposition coatings — Part 11: Bath stability
60.60
Paints and varnishes — Electro-deposition coatings — Part 12: Sedimentation on horizontal areas
60.60
Paints and varnishes — Electro-deposition coatings — Part 13: Determination of re-solving behaviour
60.60
Paints and varnishes — Electro-deposition coatings — Part 14: Deposition behaviour
60.60
Paints and varnishes — Electro-deposition coatings — Part 15: Permeate residues
60.60
Paints and varnishes — Electro-deposition coatings — Part 16: Pigment-binder ratio
60.60
Paints and varnishes — Scratch test using a spring-loaded pen
60.60
Coatings on plastics and composites — Part 1: General introduction
30.99
Coatings on plastics and composites — Part 2: Weathering
30.99
Coatings on plastics and composites — Part 3: Constant climate and alternating climate tests
30.99
Coatings on plastics and composites — Part 4: Abrasion
30.99
Coatings on plastics and composites — Part 5: Chemical resistance
30.99
Coatings on plastics and composites — Part 6: Stone chip resistance
30.99
Paints and varnishes — Determination of solar reflectance
60.60
Paints and varnishes — Test method for evaluation of adhesion of elastic adhesives on coatings by peel test, peel strength test and tensile lap-shear strength test with additional stress by condensation test or cataplasm storage
60.60
Paints and varnishes — On-site test methods on quality assessment for interior wall coatings
60.60
Solvents for paints and varnishes — Demineralized water for industrial applications — Specification and test methods
60.60
Determination of pH value — Reference buffer solutions for the calibration of pH measuring equipment
60.60
Determination of pH value — Technical buffer solutions for the calibration of technical measuring installations
60.60
Paints and varnishes — Determination of percentage volume of non-volatile matter by measuring the non-volatile matter content and the density of the coating material, and calculation of the theoretical spreading rate
95.99
Paints and varnishes — Evaluation of properties of coating systems related to the application process — Part 1: Relevant vocabulary and preparation of test panels
95.99
Paints and varnishes — Evaluation of properties of coating systems related to the application process — Part 1: Relevant vocabulary and preparation of test panels — Technical Corrigendum 1
95.99
Paints and varnishes — Evaluation of properties of coating systems related to the spray application process — Part 1: Vocabulary and preparation of test panels
60.60
Paints and varnishes — Evaluation of properties of coating systems related to the application process — Part 2: Colour stability, process hiding power, re-dissolving, overspray absorption, wetting, surface texture and mottling
95.99
Paints and varnishes — Evaluation of properties of coating systems related to the spray application process — Part 2: Colour stability, process hiding power, re-dissolving, overspray absorption, wetting, surface texture and mottling
60.60
Paints and varnishes — Evaluation of properties of coating systems related to the application process — Part 3: Visual assessment of sagging, formation of bubbles, pinholing and hiding power
95.99
Paints and varnishes — Evaluation of properties of coating systems related to the spray application process — Part 3: Assessment of sagging, formation of bubbles, pinholing and hiding power
60.60

По запросу ничего не найдено. Пожалуйста, попробуйте изменить настройки фильтра.