Фильтр :
Стандарт и/или проект находящийся в компетенции ISO/TC 61/SC 5 Секретариата | Этап | ICS |
---|---|---|
Measurement of thermal conductivity of thin films on silicon substrates
|
95.99 | |
Plastics — Determination of bulk factor of moulding materials
|
95.99 | |
Plastics — Determination of bulk factor of moulding materials
|
60.60 | |
Plastics — Determination of refractive index
|
95.99 | |
Plastics — Determination of refractive index
|
60.60 | |
Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics — Part 1: Standard method
|
95.99 | |
Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics — Part 1: Standard method
|
60.60 | |
Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics — Part 2: Method for materials sensitive to time-temperature history and/or moisture
|
90.93 | |
Plastics — Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
|
95.99 | |
Plastics — Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
|
95.99 | |
Plastics — Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
|
95.99 | |
Plastics — Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics — Technical Corrigendum 1
|
95.99 | |
Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pyknometer method and titration method
|
95.99 | |
Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pyknometer method and titration method
|
95.99 | |
Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pycnometer method and titration method
|
90.92 | |
Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pycnometer method and titration method
|
40.60 | |
Plastics — Methods for determining the density of non-cellular plastics — Part 2: Density gradient column method
|
95.99 | |
Plastics — Methods for determining the density of non-cellular plastics — Part 2: Density gradient column method
|
90.60 | |
Plastics — Methods for determining the density of non-cellular plastics — Part 3: Gas pyknometer method
|
90.93 | |
Plastics — Methods for determining the density and relative density of non-cellular plastics
|
95.99 | |
Plastics — Polyamides — Determination of "melting point"
|
95.99 | |
Plastics — Determination of electrical properties of thin sheet and film
|
95.99 | |
Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 1: General principles
|
95.99 | |
Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 1: General principles
|
95.99 | |
Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 1: General principles — Amendment 1
|
95.99 | |
Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 1: General principles
|
95.99 | |
Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 1: General principles
|
60.60 | |
Plastics — Liquid resins — Determination of density by the pyknometer method
|
95.99 | |
Plastics — Liquid resins — Determination of density by the pycnometer method
|
60.60 | |
Plastics — Resins in the liquid state or as emulsions or dispersions — Determination of apparent viscosity by the Brookfield Test method
|
95.99 | |
Plastics — Resins in the liquid state or as emulsions or dispersions — Determination of apparent viscosity using a single cylinder type rotational viscometer method
|
90.93 | |
Plastics — Determination of the gas transmission rate of films and thin sheets under atmospheric pressure — Manometric method
|
95.99 | |
Plastics — Determination of residual styrene monomer in polystyrene by gas chromatography
|
95.99 | |
Plastics — Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers
|
95.99 | |
Plastics — Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods
|
95.99 | |
Plastics — Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods — Technical Corrigendum 1
|
95.99 | |
Plastics — Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods
|
60.60 | |
Plastics — Determination of ash — Part 1: General methods
|
95.99 | |
Plastics — Determination of ash — Part 1: General methods
|
95.99 | |
Plastics — Determination of ash — Part 1: General methods
|
95.99 | |
Plastics — Determination of ash — Part 1: General methods
|
90.60 | |
Plastics — Determination of ash — Part 2: Polyalkylene terephthalates
|
95.99 | |
Plastics — Determination of ash — Part 2: Poly(alkylene terephthalate) materials
|
90.93 | |
Plastics — Determination of ash — Part 3: Unplasticized cellulose acetate
|
90.93 | |
Plastics — Determination of ash — Part 4: Polyamides
|
95.99 | |
Plastics — Determination of ash — Part 4: Polyamides
|
95.99 | |
Plastics — Determination of ash — Part 4: Polyamides
|
60.60 | |
Plastics — Determination of ash — Part 5: Poly(vinyl chloride)
|
95.99 | |
Plastics — Determination of ash — Part 5: Poly(vinyl chloride)
|
90.92 | |
Plastics — Determination of ash — Part 5: Poly(vinyl chloride)
|
40.60 | |
Plastics — Measurement of resistivity of conductive plastics
|
95.99 | |
Plastics — Measurement of resistivity of conductive plastics
|
60.60 | |
Plastics — Styrene/acrylonitrile copolymers — Determination of residual acrylonitrile monomer content — Gas chromatography method
|
95.99 | |
Plastics — Ion exchange resin — Part 1: Determination of exchange capacity of acrylic anion exchange resins
|
60.60 | |
Plastics — Ion exchange resin — Part 2: Determination of water content of anion exchange resins in hydroxide form by centrifugation
|
60.60 | |
Plastics — Ion exchange resin — Part 3: Determination of exchange capacity of anion exchange resins in hydroxide form
|
60.60 | |
Plastics — Ion exchange resin — Part 4: Determination of particle size by laser diffraction method
|
40.60 | |
Plastics — Determination of pourability
|
95.99 | |
Plastics — Determination of pourability
|
60.60 | |
Plastics — Homopolymer and copolymer resins of vinyl chloride — Determination of residual vinyl chloride monomer — Gas chromatographic method
|
95.99 | |
Plastics — Poly(vinyl chloride) — Determination of residual vinyl chloride monomer — Gas-chromatographic method
|
95.99 | |
Plastics — Poly(vinyl chloride) — Determination of residual vinyl chloride monomer using gas-chromatographic method
|
60.60 | |
Plastics — Determination of matter extractable by organic solvents (conventional methods)
|
95.99 | |
Plastics — Determination of matter extractable by organic solvents (conventional methods)
|
95.99 | |
Plastics — Determination of matter extractable by organic solvents (conventional methods)
|
90.92 | |
Plastics — Determination of matter extractable by organic solvents (conventional methods)
|
40.60 | |
Plastics — Determination of dynamic mechanical properties — Part 1: General principles
|
95.99 | |
Plastics — Determination of dynamic mechanical properties — Part 1: General principles
|
90.93 | |
Plastics — Determination of dynamic mechanical properties — Part 2: Torsion-pendulum method
|
95.99 | |
Plastics — Determination of dynamic mechanical properties — Part 2: Torsion-pendulum method
|
90.93 | |
Plastics — Determination of dynamic mechanical properties — Part 3: Flexural vibration — Resonance-curve method
|
95.99 | |
Plastics — Determination of dynamic mechanical properties — Part 3: Flexural vibration — Resonance-curve method — Technical Corrigendum 1
|
95.99 | |
Plastics — Determination of dynamic mechanical properties — Part 3: Flexural vibration — Resonance-curve method
|
60.60 | |
Plastics — Determination of dynamic mechanical properties — Part 4: Tensile vibration — Non-resonance method
|
95.99 | |
Plastics — Determination of dynamic mechanical properties — Part 4: Tensile vibration — Non-resonance method
|
90.93 | |
Plastics — Determination of dynamic mechanical properties — Part 5: Flexural vibration — Non-resonance method
|
95.99 | |
Plastics — Determination of dynamic mechanical properties — Part 5: Flexural vibration — Non-resonance method
|
90.93 | |
Plastics — Determination of dynamic mechanical properties — Part 6: Shear vibration — Non-resonance method
|
95.99 | |
Plastics — Determination of dynamic mechanical properties — Part 6: Shear vibration — Non-resonance method
|
90.93 | |
Plastics — Determination of dynamic mechanical properties — Part 7: Torsional vibration — Non-resonance method
|
95.99 | |
Plastics — Determination of dynamic mechanical properties — Part 7: Torsional vibration — Non-resonance method
|
90.93 | |
Plastics — Determination of dynamic mechanical properties — Part 8: Longitudinal and shear vibration — Wave-propagation method
|
95.99 | |
Plastics — Determination of dynamic mechanical properties — Part 8: Longitudinal and shear vibration — Wave-propagation method
|
90.93 | |
Plastics — Determination of dynamic mechanical properties — Part 9: Tensile vibration — Sonic-pulse propagation method
|
95.99 | |
Plastics — Determination of dynamic mechanical properties — Part 9: Tensile vibration — Sonic-pulse propagation method
|
90.93 | |
Plastics — Determination of dynamic mechanical properties — Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer
|
90.92 | |
Plastics — Determination of dynamic mechanical properties — Part 10: Complex shear viscosity using a parallel-plate and a cone-and-plate oscillatory rheometer
|
40.60 | |
Plastics — Determination of dynamic mechanical properties — Part 11: Glass transition temperature
|
95.99 | |
Plastics — Determination of dynamic mechanical properties — Part 11: Glass transition temperature
|
90.93 | |
Plastics — Determination of dynamic mechanical properties — Part 12: Compressive vibration — Non-resonance method
|
95.99 | |
Plastics — Determination of dynamic mechanical properties — Part 12: Compressive vibration — Non-resonance method
|
60.60 | |
Plastics — Plastics identification using Raman spectrometric methods
|
60.60 | |
Caprolactam for industrial use — Determination of absorbance at a wavelength of 290 nm
|
95.99 | |
Caprolactam for industrial use — Determination of absorbance at a wavelength of 290 nm
|
60.60 | |
Caprolactam for industrial use — Determination of crystallizing point
|
95.99 | |
Plastics — Thermogravimetry of polymers — Temperature scanning method
|
95.99 | |
Caprolactam for industrial use — Determination of colour of 50 % aqueous caprolactam solution, expressed in Hazen units (platinum-cobalt scale) — Spectrometric method
|
95.99 | |
Caprolactam for industrial use — Determination of colour of 50 % aqueous caprolactam solution, expressed in Hazen units (platinum-cobalt scale) — Spectrometric method
|
60.60 | |
Caprolactam for industrial use — Determination of permanganate index — Spectrometric method
|
95.99 | |
Plastics — Determination of permanganate absorption number of caprolactam — Spectrometric method
|
90.93 | |
Caprolactam for industrial use — Determination of volatile bases content — Titrimetric method after distillation
|
95.99 | |
Plastics — Determination of residual peroxide — Gas chromatography method
|
20.60 |
|
Plastics — Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
|
95.99 | |
Plastics — Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
|
90.93 | |
Plastics — Polyamides — Determination of e-caprolactam and w-laurolactam by gas chromatography
|
95.99 | |
Plastics — Polyamides — Determination of e-caprolactam and w-laurolactam by gas chromatography — Technical Corrigendum 1
|
95.99 | |
Plastics — Differential scanning calorimetry (DSC) — Part 1: General principles
|
95.99 | |
Plastics — Differential scanning calorimetry (DSC) — Part 1: General principles
|
95.99 | |
Plastics — Differential scanning calorimetry (DSC) — Part 1: General principles
|
95.99 | |
Plastics — Differential scanning calorimetry (DSC) — Part 1: General principles
|
60.60 | |
Plastics — Differential scanning calorimetry (DSC) — Part 2: Determination of glass transition temperature
|
95.99 | |
Plastics — Differential scanning calorimetry (DSC) — Part 2: Determination of glass transition temperature and glass transition step height
|
95.99 | |
Plastics — Differential scanning calorimetry (DSC) — Part 2: Determination of glass transition temperature and step height
|
60.60 | |
Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization
|
95.99 | |
Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization — Amendment 1
|
95.99 | |
Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization
|
95.99 | |
Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization
|
90.92 | |
Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization
|
40.60 | |
Plastics — Differential scanning calorimetry (DSC) — Part 4: Determination of specific heat capacity
|
95.99 | |
Plastics — Differential scanning calorimetry (DSC) — Part 4: Determination of specific heat capacity
|
95.99 | |
Plastics — Differential scanning calorimetry (DSC) — Part 4: Determination of specific heat capacity
|
60.60 | |
Plastics — Differential scanning calorimetry (DSC) — Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
|
95.99 | |
Plastics — Differential scanning calorimetry (DSC) — Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
|
90.92 | |
Plastics — Differential scanning calorimetry (DSC) — Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
|
40.60 | |
Plastics — Differential scanning calorimetry (DSC) — Part 6: Determination of oxidation induction time
|
95.99 | |
Plastics — Differential scanning calorimetry (DSC) — Part 6: Determination of oxidation induction time — Amendment 1
|
95.99 | |
Plastics — Differential scanning calorimetry (DSC) — Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
|
95.99 | |
Plastics — Differential scanning calorimetry (DSC) — Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
|
90.92 | |
Plastics — Differential scanning calorimetry (DSC) — Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
|
40.60 | |
Plastics — Differential scanning calorimetry (DSC) — Part 7: Determination of crystallization kinetics
|
95.99 | |
Plastics — Differential scanning calorimetry (DSC) — Part 7: Determination of crystallization kinetics
|
95.99 | |
Plastics — Differential scanning calorimetry (DSC) — Part 7: Determination of crystallization kinetics
|
60.60 | |
Plastics — Differential scanning calorimetry (DSC) — Part 8: Determination of thermal conductivity
|
60.60 | |
Plastics — Thermogravimetry (TG) of polymers — Part 1: General principles
|
95.99 | |
Plastics — Thermogravimetry (TG) of polymers — Part 1: General principles
|
60.60 | |
Plastics — Thermogravimetry (TG) of polymers — Part 2: Determination of activation energy
|
95.99 | |
Plastics — Thermogravimetry (TG) of polymers — Part 2: Determination of activation energy
|
95.99 | |
Plastics — Thermogravimetry (TG) of polymers — Part 2: Determination of activation energy
|
60.60 | |
Plastics — Thermogravimetry (TG) of polymers — Part 3: Determination of the activation energy using the Ozawa-Friedman plot and analysis of the reaction kinetics
|
95.99 | |
Plastics — Thermogravimetry (TG) of polymers — Part 3: Determination of the activation energy using the Ozawa-Friedman plot and analysis of the reaction kinetics
|
60.60 | |
Plastics — Thermogravimetry (TG) of polymers — General principles
|
95.99 | |
Plastics — Thermomechanical analysis (TMA) — Part 1: General principles
|
95.99 | |
Plastics — Thermomechanical analysis (TMA) — Part 1: General principles
|
95.99 | |
Plastics — Thermomechanical analysis (TMA) — Part 1: General principles
|
60.60 | |
Plastics — Thermomechanical analysis (TMA) — Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature
|
95.99 | |
Plastics — Thermomechanical analysis (TMA) — Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature
|
60.60 | |
Plastics — Thermomechanical analysis (TMA) — Part 3: Determination of penetration temperature
|
95.99 | |
Plastics — Thermomechanical analysis (TMA) — Part 3: Determination of penetration temperature
|
90.60 | |
Plastics — Determination of the fluidity of plastics using capillary and slit-die rheometers
|
95.99 | |
Plastics — Determination of the fluidity of plastics using capillary and slit-die rheometers
|
95.99 | |
Plastics — Determination of the fluidity of plastics using capillary and slit-die rheometers
|
95.99 | |
Plastics — Determination of the fluidity of plastics using capillary and slit-die rheometers
|
60.60 | |
Plastics — Determination of viscosity using a falling-ball viscometer — Part 1: Inclined-tube method
|
95.99 | |
Plastics — Determination of viscosity using a falling-ball viscometer — Part 1: Inclined-tube method
|
90.93 | |
Plastics — Determination of the total luminous transmittance of transparent materials — Part 1: Single-beam instrument
|
95.99 | |
Plastics — Determination of the total luminous transmittance of transparent materials — Part 1: Single-beam instrument
|
90.93 | |
Plastics — Determination of the total luminous transmittance of transparent materials — Part 2: Double-beam instrument
|
95.99 | |
Plastics — Determination of the total luminous transmittance of transparent materials — Part 2: Double-beam instrument
|
60.60 | |
Plastics — Determination of haze for transparent materials
|
95.99 | |
Plastics — Determination of haze for transparent materials — Technical Corrigendum 1
|
60.60 | |
Plastics — Determination of haze for transparent materials
|
60.60 | |
Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium — Method by measuring the oxygen demand in a closed respirometer — Technical Corrigendum 1
|
95.99 | |
Plastics — Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system — Method by measurement of biogas production
|
95.99 | |
Plastics — Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system — Method by measurement of biogas production — Technical Corrigendum 1
|
95.99 | |
Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions — Method by analysis of evolved carbon dioxide — Part 1: General method
|
95.99 | |
Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions — Method by analysis of evolved carbon dioxide — Part 1: General method — Technical Corrigendum 1
|
95.99 | |
Determination of the ultimate aerobic biodegradability and disintegration of plastic materials under controlled composting conditions — Method by analysis of evolved carbon dioxide
|
95.99 | |
Determination of the ultimate aerobic biodegradability and disintegration of plastic materials under controlled composting conditions — Method by analysis of evolved carbon dioxide — Amendment 1: Use of activated vermiculite instead of mature compost
|
95.99 | |
Plastics — Determination of caprolactam and its cyclic and linear oligomers by HPLC
|
95.99 | |
Plastics — Determination of caprolactam and its cyclic and linear oligomers by HPLC
|
95.99 | |
Plastics — Determination of caprolactam and its cyclic and linear oligomers by HPLC
|
90.93 | |
Plastics — Determination of water content
|
95.99 | |
Plastics — Determination of water content
|
95.99 | |
Plastics — Determination of water content
|
95.99 | |
Plastics — Determination of water content
|
95.99 | |
Plastics — Determination of water content
|
90.60 | |
Plastics — Determination of the ultimate anaerobic biodegradation and disintegration under high-solids anaerobic-digestion conditions — Method by analysis of released biogas
|
95.99 | |
Plastics — Determination of the ultimate anaerobic biodegradation and disintegration under high-solids anaerobic-digestion conditions — Method by analysis of released biogas — Technical Corrigendum 1
|
95.99 | |
Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 1: General principles
|
95.99 | |
Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 1: General principles — Technical Corrigendum 1
|
95.99 | |
Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 1: General principles
|
95.99 | |
Plastics — Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography — Part 1: General principles
|
90.93 | |
Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 2: Universal calibration method
|
95.99 | |
Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 2: Universal calibration method
|
95.99 | |
Plastics — Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography — Part 2: Universal calibration method
|
90.93 | |
Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 3: Low-temperature method
|
95.99 | |
Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 3: Low-temperature method
|
95.99 | |
Plastics — Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography — Part 3: Low-temperature method
|
90.93 | |
Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 4: High-temperature method
|
95.99 | |
Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 4: High-temperature method
|
95.99 | |
Plastics — Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography — Part 4: High-temperature method
|
90.93 | |
Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 5: Method using light-scattering detection
|
95.99 | |
Plastics — Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography — Part 5: Light-scattering method
|
90.93 | |
Plastics — Determination of drawing characteristics of thermoplastics in the molten state
|
95.99 | |
Plastics — Determination of drawing characteristics of thermoplastics in the molten state
|
60.60 | |
Plastics — Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test
|
95.99 | |
Specifications for compostable plastics
|
95.99 | |
Plastics — Determination of image clarity (degree of sharpness of reflected or transmitted image)
|
90.93 | |
Plastics — Determination of yellowness index and change in yellowness index
|
90.60 | |
Plastics — Determination of the ultimate aerobic biodegradability in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved
|
95.99 | |
Plastics — Determination of specific volume as a function of temperature and pressure (pvT diagram) — Piston apparatus method
|
90.92 | |
Plastics — Determination of specific volume as a function of temperature and pressure, pvT diagram — Piston apparatus method
|
40.60 | |
Plastics — Model-free kinetics based on the non-linear incremental isoconversional method
|
30.60 |
|
Plastics — Determination of average molecular mass and mixture ratio of poly(ethylene glycol) and its derivatives by MALDI-TOF-MS
|
90.93 | |
Plastics — Temperature modulated DSC — Part 1: General principles
|
90.93 | |
Plastics — Temperature modulated DSC — Part 2: Measurement of specific heat capacity cp
|
60.60 | |
Plastics — Temperature modulated DSC — Part 3: Separation of overlapping thermal transitions
|
60.60 | |
Plastics — Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test
|
95.99 | |
Plastics — Determination of the transient extensional viscosity of polymer melts
|
95.99 | |
Plastics — Determination of the transient extensional viscosity of polymer melts
|
60.60 | |
Plastics — Determination of thermal conductivity and thermal diffusivity — Part 1: General principles
|
95.99 | |
Plastics — Determination of thermal conductivity and thermal diffusivity — Part 1: General principles
|
95.99 | |
Plastics — Determination of thermal conductivity and thermal diffusivity — Part 1: General principles
|
60.60 | |
Plastics — Determination of thermal conductivity and thermal diffusivity — Part 2: Transient plane heat source (hot disc) method
|
95.99 | |
Plastics — Determination of thermal conductivity and thermal diffusivity — Part 2: Transient plane heat source (hot disc) method
|
95.99 | |
Plastics — Determination of thermal conductivity and thermal diffusivity — Part 2: Transient plane heat source (hot disc) method
|
60.60 | |
Plastics — Determination of thermal conductivity and thermal diffusivity — Part 3: Temperature wave analysis method
|
90.93 | |
Plastics — Determination of thermal conductivity and thermal diffusivity — Part 4: Laser flash method
|
95.99 | |
Plastics — Determination of thermal conductivity and thermal diffusivity — Part 4: Laser flash method
|
95.99 | |
Plastics — Determination of thermal conductivity and thermal diffusivity — Part 4: Light flash method
|
60.60 | |
Plastics — Determination of thermal conductivity and thermal diffusivity — Part 5: Results of interlaboratory testing of poly(methyl methacrylate) samples
|
60.60 | |
Plastics — Determination of thermal conductivity and thermal diffusivity — Part 6: Comparative method for low thermal conductivities using a temperature-modulation technique
|
90.93 | |
Plastics — Determination of thermal conductivity and thermal diffusivity — Part 7: Transient measurement of thermal effusivity using a plane heat source
|
60.60 | |
Plastics — Elasticity index — Determination of elastic property of melts
|
60.60 | |
Plastics — Fast differential scanning calorimetry (FSC) — Chip calorimetry
|
60.60 | |
Plastics — Homopolymer and copolymer resins of vinyl chloride — Determination of residual vinyl chloride monomer by gas-chromatographic analysis of dry powder
|
90.93 | |
Plastics — Production quality control — Statistical method for using single measurements
|
90.93 | |
Plastics — Determination of total luminous transmittance and reflectance
|
60.60 | |
Determination of certain substances in electrotechnical products — Part 11: Tris (2-chloroethyl) phosphate (TCEP) in plastics by gas chromatography-mass spectrometry (GC-MS) and liquid chromatography-mass spectrometry (LC-MS)
|
60.60 |
По запросу ничего не найдено. Пожалуйста, попробуйте изменить настройки фильтра.