Plastics — Determination of tensile properties — Part 3: Test conditions for films and sheets

Plastics — Determination of tensile properties — Part 3: Test conditions for films and sheets — Technical Corrigendum 2

Plastics — Determination of tensile properties — Part 3: Test conditions for films and sheets

Plastics — Determination of tensile properties of films

Plastics — Industrial laminated sheets based on thermosetting resins — Specification

Adhesives — Determination of peel resistance of high-strength adhesive bonds — Floating roller method

Adhesives — Determination of peel resistance of high-strength adhesive bonds — Floating-roller method

Plastics — Decorative laminated sheets based on thermosetting resins — Part 1: Specification

Decorative high-pressure laminates (HPL) — Sheets based on thermosetting resins — Part 1: Specification

High-pressure decorative laminates — Sheets made from thermosetting resins — Part 1: Classification and specifications

High-pressure decorative laminates — Sheets made from thermosetting resins — Part 1: Classification and specifications

High-pressure decorative laminates — Sheets made from thermosetting resins — Part 1: Classification and specifications — Amendment 3: Lightfastness

High-pressure decorative laminates — Sheets made from thermosetting resins — Part 1: Classification and specifications

High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (Usually called Laminates) — Part 1: Introduction and general information

High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (usually called laminates) — Part 1: Introduction and general information

Plastics — Decorative laminated sheets based on thermosetting resins — Part 2: Determination of properties

Decorative high-pressure laminates (HPL) — Sheets based on thermosetting resins — Part 2: Determination of properties

High-pressure decorative laminates — Sheets made from thermosetting resins — Part 2: Determination of properties

High-pressure decorative laminates — Sheets made from thermosetting resins — Part 2: Determination of properties

High-pressure decorative laminates — Sheets made from thermosetting resins — Part 2: Determination of properties — Amendment 3: Lightfastness

High-pressure decorative laminates — Sheets made from thermosetting resins — Part 2: Determination of properties — Amendment 4: Resistance to surface wear

High-pressure decorative laminates — Sheets made from thermosetting resins — Part 2: Determination of properties — Amendment 5: Resistance to scratching

High-pressure decorative laminates — Sheets made from thermosetting resins — Part 2: Determination of properties — Amendment 6: Resistance to wet heat

High-pressure decorative laminates — Sheets made from thermosetting resins — Part 2: Determination of properties — Amendment 7: Stain resistance and cleanability

High-pressure decorative laminates — Sheets made from thermosetting resins — Part 2: Determination of properties — Amendment 8: Dimensional stability

High-pressure decorative laminates — Sheets made from thermosetting resins — Part 2: Determination of properties

High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (Usually called Laminates) — Part 2: Determination of properties

High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (usually called laminates) — Part 2: Determination of properties

High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (Usually called Laminates) — Part 3: Classification and specifications for laminates less than 2 mm thick and intended for bonding to supporting substrates

High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (usually called laminates) — Part 3: Classification and specifications for laminates less than 2 mm thick and intended for bonding to supporting substrates

High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (Usually called Laminates) — Part 4: Classification and specifications for compact laminates of thickness 2 mm and greater

High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (usually called laminates) — Part 4: Classification and specifications for compact laminates of thickness 2 mm and greater

High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (Usually called Laminates) — Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates

High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (usually called laminates) — Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates

High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (Usually called Laminates) — Part 6: Classification and specifications for exterior-grade compact laminates of thickness 2 mm and greater

High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (usually called laminates) — Part 6: Classification and specifications for exterior-grade compact laminates of thickness 2 mm and greater

High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (Usually called Laminates) — Part 7: Classification and specifications for design laminates

High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (usually called laminates) — Part 7: Classification and specifications for design laminates

High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (Usually called Laminates) — Part 8: Classification and specifications for alternative core laminates

High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (usually called laminates) — Part 8: Classification and specifications for alternative core laminates

Adhesives — Determination of tensile lap-shear strength of high strength adhesive bonds

Adhesives — Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies

Adhesives — Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies

Adhesives — Preparation of metal surfaces for adhesive bonding

Adhesives — Guidelines for the surface preparation of metals

Plastics — Film and sheeting — Determination of average thickness of a sample and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness)

Plastics — Film and sheeting — Determination of average thickness of a sample, and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness)

Plastics — Film and sheeting — Determination of length and width

Plastics — Film and sheeting — Determination of length and width

Plastics — Film and sheeting — Determination of thickness by mechanical scanning

Plastics — Film and sheeting — Determination of thickness by mechanical scanning

Guide for the analysis of differences between various standards of fibre reinforced plastic-working towers made of prefabricated elements

Plastics — Joining of thermoplastic moulded components — Specification for quality levels for imperfections

Adhesives — Floor covering adhesives and products for flooring installation — Assessment and classification of low volatile organic compound (VOC) products

Adhesives — Floor covering adhesives and products for flooring installation — Assessment and classification of low volatile organic compound (VOC) products

Adhesives — Installation of floor coverings, wood flooring, levelling compounds and tiles — Specification of trowel notch sizes

Adhesives — Wood-to-wood adhesive bonds — Determination of shear strength by tensile loading

Adhesives — Wood-to-wood adhesive bonds — Determination of shear strength by tensile loading

Adhesives — Wood-to-wood adhesive bonds — Determination of shear strength by tensile loading

Adhesives — Wood-to-wood adhesive bonds — Determination of shear strength by compression loading

Adhesives — Wood-to-wood adhesive bonds — Determination of shear strength by compressive loading

Adhesives — Wood-to-wood adhesive bonds — Determination of shear strength by compressive loading

Plastics — Film and sheeting — Determination of tear resistance — Part 1: Trouser tear method

Plastics — Film and sheeting — Determination of tear resistance — Part 1: Trouser tear method

Plastics — Film and sheeting — Determination of tear resistance — Part 2: Elmendorf method

Adhesives — Determination of tensile strength of butt joints

Plastics film and sheeting — Determination of impact resistance by the free-falling dart method — Part 1: Staircase methods

Plastics film and sheeting — Determination of impact resistance by the free-falling dart method — Part 2: Instrumented puncture test

Plastics film and sheeting — Determination of impact resistance by the free-falling dart method — Part 2: Instrumented puncture test

Plastics film and sheeting — Determination of impact resistance by the free-falling dart method — Part 2: Instrumented puncture test

Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 1: Cast sheets

Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 1: Cast sheets

Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 1: Cast sheets

Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 1: Cast sheets

Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 2: Melt-calendered extruded sheets

Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 2: Melt-calendered extruded sheets — Technical Corrigendum 1

Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 2: Melt-calendered extruded sheets

Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 2: Extruded sheets

Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 3: Continuous cast sheets

Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 3: Continuous cast sheets

Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 3: Continuous cast sheets

Adhesives — Absorption of water into an adhesive layer using an open-faced specimen and determination of shear strength by secondary bonding

Plastics — Film and sheeting — Determination of the coefficients of friction

Plastics — Film and sheeting — Determination of the coefficients of friction

Plastics — Film and sheeting — Determination of wetting tension

Plastics — Film and sheeting — Determination of wetting tension — Technical Corrigendum 1

Plastics — Film and sheeting — Determination of wetting tension

Adhesives — Peel test for a flexible-bonded-to-rigid test specimen assembly — Part 1: 90 degree peel

Adhesives — Peel test for a flexible-bonded-to-rigid test specimen assembly — Part 2: 180 degree peel

Adhesives — Peel test for a flexible-bonded-to-rigid test specimen assembly — Part 2: 180° peel

Plastics — Film and sheeting - Determination of cold-crack temperature

Adhesives — Guide to the selection of standard laboratory ageing conditions for testing bonded joints

Adhesives — Guide to the selection of standard laboratory ageing conditions for testing bonded joints — Technical Corrigendum 1

Adhesives — Guide to the selection of standard laboratory ageing conditions for testing bonded joints

Adhesives — Test method for shear impact strength of adhesive bonds

Adhesives — Test method for shear impact strength of adhesive bonds

Adhesives — Test methods for fatigue properties of structural adhesives in tensile shear

Adhesives — Animal glues — Methods for sampling and testing

Adhesives — Animal glues — Methods of sampling and testing

Adhesives — Determination of shear strength of anaerobic adhesives using pin-and-collar specimens

Adhesives — Determination of shear strength of anaerobic adhesives using pin-and-collar specimens

Adhesives — Characterization of durability of structural-adhesive-bonded assemblies — Wedge rupture test

Hot-melt adhesives — Determination of thermal stability

Adhesives — Determination of working life (pot life) of multi-component adhesives

Structural adhesives — Determination of the pot life (working life) of multi-component adhesives

Structural adhesives — Determination of the pot life (working life) of multi-component adhesives

Structural adhesives — Determination of the pot life (working life) of multi-component adhesives

Adhesives — Designation of main failure patterns

Adhesives — Designation of main failure patterns

Adhesives — Determination of torque strength of anaerobic adhesives on threaded fasteners

Adhesives — Determination of shear behaviour of structural bonds — Part 1: Torsion test method using butt-bonded hollow cylinders

Adhesives — Determination of shear behaviour of structural adhesives — Part 1: Torsion test method using butt-bonded hollow cylinders

Adhesives — Determination of shear behaviour of structural adhesives — Part 1: Torsion test method using butt-bonded hollow cylinders

Adhesives — Determination of shear behaviour of structural bonds — Part 2: Thick-adherend tensile-test method

Adhesives — Determination of shear behaviour of structural adhesives — Part 2: Tensile test method using thick adherends

Adhesives — Determination of shear behaviour of structural adhesives — Part 2: Tensile test method using thick adherends

Adhesives — 180 degree peel test for flexible-to-flexible bonded assemblies (T-peel test)

Adhesives — T-peel test for flexible-to-flexible bonded assemblies

Adhesives — T-peel test for flexible-to-flexible bonded assemblies

Adhesives — T-peel test for flexible-to-flexible bonded assemblies

Adhesives — Determination of dynamic resistance to cleavage of high strength adhesive bonds under impact conditions — Wedge impact method

Adhesives — Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions — Wedge impact method

Adhesives — Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact wedge conditions — Wedge impact method

Plastics — Film and sheeting — Determination of dimensional change on heating

Plastics — Film and sheeting — Determination of blocking resistance

Plastics — Film and sheeting — Determination of blocking resistance

Fibre reinforced plastics — Telescopic ladder — Requirements and test methods

Plastics — Unplasticized poly(vinyl chloride) sheets — Types, dimensions and characteristics — Part 1: Sheets of thickness not less than 1 mm

Plastics — Unplasticized poly(vinyl chloride) sheets — Types, dimensions and characteristics — Part 1: Sheets of thickness not less than 1 mm

Plastics — Unplasticized poly(vinyl chloride) sheets — Types, dimensions and characteristics — Part 1: Sheets of thickness not less than 1 mm

Plastics — Unplasticized poly(vinyl chloride) sheets — Part 1: Types, dimensions and characteristics for sheets of thickness not less than 1 mm

Plastics — Unplasticized poly(vinyl chloride) sheets — Types, dimensions and characteristics — Part 2: Sheets of thickness less than 1 mm

Plastics — Polycarbonate sheets — Types, dimensions and characteristics

Plastics — Polycarbonate sheets — Types, dimensions and characteristics

Plastics — Polycarbonate sheets — Types, dimensions and characteristics

Plastics — Poly(methyl methacrylate) double- and triple-skin sheets — Test methods

Plastics — Poly(methyl methacrylate) double- and triple-skin sheets — Test methods

Plastics — Blow-moulded polypropylene containers for packaging of liquid foodstuffs

Adhesives — Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method

Adhesives — Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method

Plastics — Film and sheeting — Non-oriented poly(ethylene terephthalate) (PET) sheets

High-pressure decorative laminates — Composite elements — Part 1: Test methods

High-pressure decorative laminates — Composite elements — Part 2: Specifications for composite elements with wood-based substrates for interior use

Adhesives — Guidelines for the surface preparation of plastics

Adhesives — Durability of structural adhesive joints — Exposure to humidity and temperature under load

Plastics — Heatshrinkable films of polyethylene, ethylene copolymers and their mixtures — Determination of shrinkage stress and contraction stress

Extruded sheets of impact-modified polystyrene (PS-I) — Requirements and test methods

Extruded sheets of impact-modified polystyrene (PS-I) — Requirements and test methods

Extruded sheets of polyethylene (PE-HD) — Requirements and test methods

Extruded sheets of polyethylene (PE-HD) — Requirements and test methods

Adhesives — Evaluation of the effectiveness of surface treatment techniques for aluminium — Wet-peel test by floating-roller method

Adhesives — Determination of resistance to flow (sagging)

Adhesives — Measurement of adhesion characteristics by a three-point bending method

Extruded sheets of polypropylene (PP) — Requirements and test methods

Plastics — Extruded sheets of polypropylene (PP) — Requirements and test methods

Plastics — Extruded sheets of polypropylene (PP) — Requirements and test methods

Plastics — Extruded sheets of poly(vinylidene fluoride) (PVDF) — Requirements and test methods

Plastics — Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA) — Requirements and test methods

Plastics — Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA) — Requirements and test methods

Plastics — Film and sheeting — Determination of gas-transmission rate — Part 1: Differential-pressure method

Plastics — Film and sheeting — Determination of gas-transmission rate — Part 1: Differential-pressure methods

Plastics — Film and sheeting — Determination of gas-transmission rate — Part 2: Equal-pressure method

Plastics — Film and sheeting — Determination of water vapour transmission rate — Part 1: Humidity detection sensor method

Plastics — Film and sheeting — Determination of water vapour transmission rate — Part 2: Infrared detection sensor method

Plastics — Film and sheeting — Determination of water vapour transmission rate — Part 3: Electrolytic detection sensor method

Plastics — Film and sheeting — Determination of water vapour transmission rate — Part 4: Gas-chromatographic detection sensor method

Plastics — Film and sheeting — Determination of water vapour transmission rate — Part 5: Pressure sensor method

Plastics — Film and sheeting — Determination of water vapour transmission rate — Part 6: Atmospheric pressure ionization mass spectrometer method

Plastics — Film and sheeting — Determination of water vapour transmission rate — Part 7: Calcium corrosion method

Adhesives — Determination of cleavage strength of bonded joints

Adhesives — Determination of strength of bonded joints using a bending-shear method

Adhesives — Determination of the time to rupture of bonded joints under static load

Adhesives — Methods of preparing bulk specimens — Part 1: Two-part systems

Adhesives — Methods of preparing bulk specimens — Part 2: Elevated-temperature-curing one-part systems

Adhesives — Determination of the bond strength of engineering-plastic joints

Adhesives — Determination of the bond strength of engineering-plastic joints

Plastics — Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) — Requirements and test methods

Plastics — Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) — Requirements and test methods

Plastics — Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) — Requirements and test methods

Plastics — Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) — Requirements and test methods

Adhesives — Sampling

Plastics — Film and sheeting — Biaxially oriented polyamide (nylon) films

Plastics — Film and sheeting — Biaxially oriented poly(ethylene terephthalate) (PET) films

Plastics — Film and sheeting — Measurement of water-contact angle of corona-treated films

Plastics — Film and sheeting — Measurement of water-contact angle of corona-treated films — Technical Corrigendum 1

Adhesives — Test methods for isotropic electrically conductive adhesives — Part 1: General test methods

Adhesives — Test methods for isotropic electrically conductive adhesives — Part 2: Determination of electrical characteristics for use in electronic assemblies

Adhesives — Test methods for isotropic electrically conductive adhesives — Part 3: Determination of heat-transfer properties

Adhesives — Test methods for isotropic electrically conductive adhesives — Part 4: Determination of shear strength and electrical resistance using rigid-to-rigid bonded assemblies

Adhesives — Test methods for isotropic electrically conductive adhesives — Part 5: Determination of shear fatigue

Adhesives — Test methods for isotropic electrically conductive adhesives — Part 6: Determination of pendulum-type shear impact

Adhesives — Test methods for isotropic electrically conductive adhesives — Part 7: Environmental test methods

Adhesives — Test methods for isotropic electrically conductive adhesives — Part 8: Electrochemical-migration test methods

Adhesives — Test methods for isotropic electrically conductive adhesives — Part 9: Determination of high-speed signal-transmission characteristics

Test methods for natural fibre-reinforced plastic composite (NFC) deck boards

Specifications for adhesives used for finger joints in non-structural lumber products

Adhesives — Adhesives for bonding parquet to subfloor — Test methods and minimum requirements

Structural adhesives — A standard database of properties

Structural adhesives — Standard database of properties

Structural adhesives — Guidelines for the surface preparation of metals and plastics prior to adhesive bonding

Structural adhesives — Guidelines for the surface preparation of metals and plastics prior to adhesive bonding

Plastics — Film and sheeting — Biaxially oriented polypropylene (PP) films

Plastics — Film and sheeting — Biaxially oriented polypropylene (PP) films

Plastics — Film and sheeting — Cast polypropylene (PP) films

Specification of polypropylene drinking straws

Specification for Thermoplastic Water Meter Cabinet

Plastic Scaffold Planks Performance and General Design Requirements

Plastics — Evaluation of the adhesion interface performance in plastic-metal assemblies — Part 1: Guidelines for the approach

Plastics — Evaluation of the adhesion interface performance in plastic-metal assemblies — Part 2: Test specimens

Plastics — Evaluation of the adhesion interface performance in plastic-metal assemblies — Part 3: Test methods

Plastics — Evaluation of the adhesion interface performance in plastic-metal assemblies — Part 4: Environmental conditions for durability

Plastics — Evaluation of the adhesion interface performance in plastic-metal assemblies — Part 5: Fracture energy

Plastics — Evaluation of the adhesion interface performance in plastic-metal assemblies — Part 6: Accelerated degradation test

Adhesives — Classification of thermoplastic wood adhesives for non-structural applications

Adhesives — Wood adhesives for non-structural applications — Determination of tensile shear strength of lap joints

Adhesives — Determination of temperature dependence of shear strength

Superabsorbent polymer — Sodium polyacrylate resin for absorbing blood — Part 1: Test methods

Superabsorbent polymer — Sodium polyacrylate resin for absorbing blood — Part 2: Specifications

Plastics — Decorative solid surfacing materials — Part 1: Classification and specifications

Plastics — Decorative solid surfacing materials — Part 2: Determination of properties — Sheet goods

Plastics — Decorative solid surfacing materials — Part 3: Determination of properties — Solid surface shapes

Plastics — Decorative solid surfacing materials — Part 3: Determination of properties — Solid surface shapes

Determination of span rating for natural fibre-reinforced plastic composite (NFC) deck boards

Plastics moulded parts — Tolerances and acceptance conditions

Plastics moulded parts — Tolerances and acceptance conditions

Plastics — Wood-plastic recycled composites (WPRC) — Part 1: Specification

Plastics — Wood-plastic recycled composites (WPRC) — Part 2: Test methods

Plastics — Wood-plastic recycled composites (WPRC) — Specification

Adhesives — Guideline for separating adhesively bonded joints enabling repair and improving recycling

Elastic adhesives — Testing of adhesively bonded joints — Bead peel test

Adhesives — Guidelines for the fabrication of adhesively bonded structures and reporting procedures suitable for the risk evaluation of such structures

Adhesives — Guidelines for the fabrication of adhesively bonded structures and reporting procedures suitable for the risk evaluation of such structures

Adhesives for organic electronic devices — Determination of water vapour transmission rate — Part 1: Adhesive film preparation methods

Adhesives for organic electronic devices — Determination of water vapour transmission rate — Part 2: Edge seal methods

Adhesives — Test methods for adhesives for floor and wall coverings — Peel test

Adhesives — Test methods for adhesives for floor and wall coverings — Shear test

Adhesives — Test methods for adhesives for floor coverings and wall coverings — Determination of the dimensional changes of a linoleum floor covering in contact with an adhesive

Adhesives — Test methods for adhesives for plastic or rubber floor coverings or wall coverings — Determination of dimensional changes after accelerated ageing

Adhesives — Adhesives for floor coverings — Requirements for mechanical and electrical performance

Adhesives — Test of adhesive for floor covering — Determination of the electrical resistance of adhesive films and composites

Plastics — Joining of thermoplastic moulded components — Specification of variables for thermal joining processes

Plastics — Film and sheeting — Guidance on the testing of thermoplastic films

Plastics — Film and sheeting — Guidance on the testing of thermoplastic films

Woven polypropylene sacks for bulk packaging of foodstuffs

Woven polypropylene sacks for bulk packaging of foodstuffs

Fiber reinforced plastics - cambered triangular thin wall rod - three point bending test

Rotational molded Polyethylene Water Storage Tanks

Adhesives — Determination of the solubility of water-soluble or alkali-soluble pressure-sensitive adhesives

Adhesives — Determination of the solubility of water-soluble or alkali-soluble pressure-sensitive adhesives

Adhesives — Test methods for the evaluation and selection of adhesives for indoor wood products — Part 1: Resistance to delamination in non-severe environments

Adhesives — Test methods for the evaluation and selection of adhesives for indoor wood products — Part 1: Resistance to delamination in non-severe environments

Adhesives — Test methods for the evaluation and selection of adhesives for indoor wood products — Part 1: Resistance to delamination in non-severe environments

Adhesives — Test methods for the evaluation and selection of adhesives for indoor wood products — Part 2: Resistance to delamination in severe environments

Adhesives — Test methods for the evaluation and selection of adhesives for indoor wood products — Part 2: Resistance to delamination in severe environments

Adhesives — Test methods for the evaluation and selection of adhesives for indoor wood products — Part 2: Resistance to delamination in severe environments

Self adhesive tapes — Determination of peel adhesion properties

Self adhesive tapes — Determination of peel adhesion properties

Self adhesive tapes — Determination of peel adhesion properties

Self adhesive tapes — Measurement of static shear adhesion

Self adhesive tapes — Measurement of static shear adhesion

Self adhesive tapes — Measurement of breaking strength and elongation at break

Self adhesive tapes — Measurement of breaking strength and elongation at break

Adhesives for non-structural wood applications — Test method and requirements for resistance to static load

Adhesives — Wood adhesives — Determination of tensile strength of lap joints at elevated temperature (WATT '91)