International Standard
ISO 974:2000
Plastics — Determination of the brittleness temperature by impact
Reference number
ISO 974:2000
Версия 2
2000-01
International Standard
Предпросмотр
p
ISO 974:2000
28169
недоступно на русском языке
Опубликовано (Версия 2, 2000)
Последний раз этот стандарт был пересмотрен в  2020. Поэтому данная версия остается актуальной.

ISO 974:2000

ISO 974:2000
28169
Формат
Язык
CHF 63
Пересчитать швейцарские франки (CHF) в ваша валюта

Тезис

This International Standard specifies a method for the determination of the temperature at which plastics that are not rigid at normal ambient temperature exhibit brittle failure under specified impact conditions. A supplementary technique using notched specimens develops brittleness values at a much higher temperature than are observed for unnotched specimens of the same plastic material. The method utilizes a statistical technique to quantify the brittleness failure temperature. Provisions are made for the testing of sufficient specimens to permit the calculation of the brittleness temperature on a statistical basis. Statistical techniques have been developed to quantify the brittleness temperature as is defined in 3.1.

The method establishes the temperature at which there is a 50 % chance of failure in either unnotched or notched specimens. This method has been found useful for specification purposes, although it does not necessarily measure the lowest temperature at which the material may be used. In the measurement of the brittleness temperature, the precision of the measurement should preferably be _ 5 °C at the worst when establishing values used in material specifications.

Общая информация

  •  : Опубликовано
     : 2000-01
    : Подтверждение действия между-народного стандарта [90.93]
  •  : 2
  • ISO/TC 61/SC 2
    83.080.01 
  • RSS обновления

Жизненный цикл

Появились вопросы?

Ознакомьтесь с FAQ

Работа с клиентами
+41 22 749 08 88

Часы работы:
Понедельник – пятница: 09:00-12:00, 14:00-17:00 (UTC+1)