Filter :
Standard and/or project under the direct responsibility of ISO/TC 150/SC 4 Secretariat | Stage | ICS |
---|---|---|
Implants for surgery — Orthopaedic joint prostheses — Basic requirements
|
95.99 | |
Implants for surgery — Partial and total hip joint prostheses — Part 1: Classification, designation of dimensions and requirements
|
95.99 | |
Implants for surgery — Partial and total hip joint prostheses — Part 1: Classification and designation of dimensions
|
95.99 | |
Implants for surgery — Partial and total hip joint prostheses — Part 1: Classification and designation of dimensions
|
90.93 | |
Implants for surgery — Partial and total hip joint prostheses — Part 1: Classification and designation of dimensions
|
20.98 |
|
Implants for surgery — Partial and total hip joint prostheses — Part 2: Bearing surfaces made of metallic and plastics materials
|
95.99 | |
Implants for surgery — Partial and total hip joint prostheses — Part 2: Articulating surfaces made of metallic, ceramic and plastics materials
|
95.99 | |
Implants for surgery — Partial and total hip joint prostheses — Part 2: Articulating surfaces made of metallic, ceramic and plastics materials
|
90.92 | |
Implants for surgery — Partial and total hip joint prostheses — Part 2: Articulating surfaces made of metallic, ceramic and plastics materials — Amendment 1
|
60.60 | |
Implants for surgery — Partial and total hip joint prostheses — Part 2: Articulating surfaces made of metallic, ceramic and plastics materials
|
20.00 |
|
Implants for surgery — Partial and total hip joint prostheses — Part 3: Determination of endurance properties of stemmed femoral components without application of torsion
|
95.99 | |
Implants for surgery — Partial and total hip joint prostheses — Part 4: Determination of endurance properties of stemmed femoral components with application of torsion
|
95.99 | |
Implants for surgery — Partial and total hip joint prostheses — Part 4: Determination of endurance properties of stemmed femoral components
|
95.99 | |
Implants for surgery — Partial and total hip joint prostheses — Part 4: Determination of endurance properties and performance of stemmed femoral components
|
90.93 | |
Implants for surgery — Partial and total hip joint prostheses — Part 4: Determination of endurance properties and performance of stemmed femoral components — Amendment 1
|
60.60 | |
Implants for surgery — Partial and total hip joint prostheses — Part 5: Determination of resistance to static load of head and neck region of stemmed femoral components
|
95.99 | |
Implants for surgery — Partial and total hip joint prostheses — Part 6: Determination of endurance properties of head and neck region of stemmed femoral components
|
95.99 | |
Implants for surgery — Partial and total hip joint prostheses — Part 6: Endurance properties testing and performance requirements of neck region of stemmed femoral components
|
90.92 | |
Implants for surgery — Partial and total hip joint prostheses — Part 6: Endurance properties testing and performance requirements of neck region of stemmed femoral components
|
20.00 |
|
Implants for surgery — Partial and total hip joint prostheses — Part 7: Endurance performance of stemmed femoral components without application of torsion
|
95.99 | |
Implants for surgery — Partial and total hip joint prostheses — Part 8: Endurance performance of stemmed femoral components with application of torsion
|
95.99 | |
Implants for surgery — Partial and total hip joint prostheses — Part 9: Determination of resistance to torque of head fixation of stemmed femoral components
|
95.99 | |
Implants for surgery — Partial and total hip-joint prostheses — Part 10: Determination of resistance to static load of modular femoral heads
|
95.99 | |
Implants for surgery — Partial and total hip-joint prostheses — Part 10: Determination of resistance to static load of modular femoral heads
|
90.93 | |
Implants for surgery — Partial and total hip-joint prostheses — Part 10: Determination of resistance to static load of modular femoral heads — Amendment 1
|
60.60 | |
Implants for surgery — Partial and total hip joint prostheses — Part 12: Deformation test method for acetabular shells
|
90.92 | |
Implants for surgery — Partial and total hip joint prostheses — Part 12: Deformation test method for press-fit acetabular components
|
40.20 | |
Implants for surgery — Partial and total hip joint prostheses — Part 13: Determination of resistance to torque of head fixation of stemmed femoral components
|
90.93 | |
Implants for surgery — Partial and total hip joint prostheses — Part 13: Determination of resistance to torque of head fixation of stemmed femoral components — Amendment 1
|
60.60 | |
Implants for surgery — Partial and total knee joint prostheses — Part 1: Classification, definitions and designation of dimensions
|
95.99 | |
Implants for surgery — Components for partial and total knee joint prostheses — Part 1: Classification, definitions and designation of dimensions
|
95.99 | |
Implants for surgery — Components for partial and total knee joint prostheses — Part 1: Classification, definitions and designation of dimensions
|
90.93 | |
Implants for surgery — Components for partial and total knee joint prostheses — Part 2: Articulating surfaces made of metal, ceramic and plastics materials
|
95.99 | |
Implants for surgery — Components for partial and total knee joint prostheses — Part 2: Articulating surfaces made of metal, ceramic and plastics materials
|
90.92 | |
Implants for surgery — Components for partial and total knee joint prostheses — Part 2: Articulating surfaces made of metal, ceramic and plastics materials — Amendment 1
|
60.60 | |
Implants for surgery — Components for partial and total knee joint prostheses — Part 2: Articulating surfaces made of metal, ceramic and plastics materials — Amendment 2
|
60.60 | |
Implants for surgery — Components for partial and total knee joint prostheses — Part 2: Articulating surfaces made of metal, ceramic and plastics materials
|
40.60 | |
Implants for surgery — Partial and total hip joint prostheses — Recommendations for simulators for evaluation of hip joint prostheses
|
95.99 | |
Implants for surgery — Partial and total hip joint prostheses — Guidance for laboratory evaluation of change of form of bearing surfaces
|
95.99 | |
Implants for surgery — Determination of impact resistance of ceramic femoral heads for hip joint prostheses
|
90.93 | |
Implants for surgery — Wear of total hip-joint prostheses — Part 1: Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test
|
95.99 | |
Implants for surgery — Wear of total hip-joint prostheses — Part 1: Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test
|
95.99 | |
Implants for surgery — Wear of total hip-joint prostheses — Part 1: Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test
|
90.93 | |
Implants for surgery — Wear of total hip-joint prostheses — Part 1: Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test — Amendment 1
|
60.60 | |
Implants for surgery — Wear of total hip-joint prostheses — Part 1: Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test
|
20.98 |
|
Implants for surgery — Wear of total hip-joint prostheses — Part 2: Methods of measurement
|
95.99 | |
Implants for surgery — Wear of total hip-joint prostheses — Part 2: Methods of measurement
|
90.93 | |
Implants for surgery — Wear of total hip-joint prostheses — Part 3: Loading and displacement parameters for orbital bearing type wear testing machines and corresponding environmental conditions for test
|
90.93 | |
Implants for surgery — Wear of total hip-joint prostheses — Part 3: Loading and displacement parameters for orbital bearing type wear testing machines and corresponding environmental conditions for test — Amendment 1
|
60.60 | |
Implants for surgery — Wear of total hip-joint prostheses — Part 3: Loading and displacement parameters for orbital bearing type wear testing machines and corresponding environmental conditions for test
|
20.98 |
|
Implants for surgery — Wear of total hip-joint prostheses — Part 4: Testing hip prostheses under variations in component positioning which results in direct edge loading
|
90.93 | |
Implants for surgery — Wear of total knee-joint prostheses — Part 1: Loading and displacement parameters for wear-testing machines with load control and corresponding environmental conditions for test
|
95.99 | |
Implants for surgery — Wear of total knee-joint prostheses — Part 1: Loading and displacement parameters for wear-testing machines with load control and corresponding environmental conditions for test
|
90.92 | |
Implants for surgery — Wear of total knee-joint prostheses — Part 1: Loading and displacement parameters for wear-testing machines with load control and corresponding environmental conditions for test — Amendment 1
|
60.60 | |
Implants for surgery — Wear of total knee-joint prostheses — Part 1: Loading and displacement parameters for wear-testing machines with load control and corresponding environmental conditions for test
|
30.60 |
|
Implants for surgery — Wear of total knee-joint prostheses — Part 1: Methodology for simulator wear testing of tibio-femoral joints under force control
|
20.98 |
|
Implants for surgery — Wear of total knee-joint prostheses — Part 2: Methods of measurement
|
95.99 | |
Implants for surgery — Wear of total knee-joint prostheses — Part 2: Methods of measurement
|
95.99 | |
Implants for surgery — Wear of total knee-joint prostheses — Part 2: Methods of measurement
|
90.93 | |
Implants for surgery — Wear of total knee-joint prostheses — Part 3: Loading and displacement parameters for wear-testing machines with displacement control and corresponding environmental conditions for test
|
95.99 | |
Implants for surgery — Wear of total knee-joint prostheses — Part 3: Loading and displacement parameters for wear-testing machines with displacement control and corresponding environmental conditions for test — Technical Corrigendum 1
|
95.99 | |
Implants for surgery — Wear of total knee-joint prostheses — Part 3: Loading and displacement parameters for wear-testing machines with displacement control and corresponding environmental conditions for test
|
90.92 | |
Implants for surgery — Wear of total knee-joint prostheses — Part 3: Loading and displacement parameters for wear-testing machines with displacement control and corresponding environmental conditions for test — Amendment 1
|
60.60 | |
Implants for surgery — Wear of total knee-joint prostheses — Part 3: Loading and displacement parameters for wear-testing machines with displacement control and corresponding environmental conditions for test
|
30.60 |
|
Implants for surgery — Wear of total knee-joint prostheses — Part 3: Methodology for simulator wear testing of tibio-femoral joints under displacement control
|
20.98 |
|
Implants for surgery — Wear of total knee prostheses — Part 5: Durability performance of the patellofemoral joint
|
90.60 | |
Implants for surgery — Total knee-joint prostheses — Part 1: Determination of endurance properties of knee tibial trays
|
95.99 | |
Implants for surgery — Total knee-joint prostheses — Part 1: Determination of endurance properties of knee tibial trays
|
60.60 | |
Implants for surgery — Roentgen stereophotogrammetric analysis for the assessment of migration of orthopaedic implants
|
90.60 | |
Implants for surgery — Wear of total shoulder-joint prostheses — Part 1: Force and displacement parameters for wear-testing machines and corresponding environmental conditions for test of anatomic total shoulder-joint prostheses
|
40.60 | |
Implants for surgery — Wear of total shoulder-joint prostheses — Part 2: Force and displacement parameters for wear-testing machines and corresponding environmental conditions for test of reverse total shoulder-joint prostheses
|
20.98 |
|
Wear of implant materials — Polymer and metal wear particles — Isolation, characterization and quantification
|
95.99 | |
Wear of implant materials — Polymer and metal wear particles — Isolation, characterization and quantification — Technical Corrigendum 1
|
95.99 | |
Wear of implant materials — Polymer and metal wear particles — Isolation and characterization
|
95.99 | |
Wear of implant materials — Polymer and metal wear particles — Isolation and characterization
|
90.93 | |
Implants for surgery — Orthopaedic joint prosthesis — Part 1: Procedure for producing parametric 3D bone models from CT data of the knee
|
90.93 | |
Non-active surgical implants — Joint replacement implants — Particular requirements
|
95.99 | |
Non-active surgical implants — Joint replacement implants — Particular requirements
|
90.93 | |
Non-active surgical implants — Joint replacement implants — Specific requirements for hip-joint replacement implants
|
95.99 | |
Non-active surgical implants — Joint replacement implants — Specific requirements for hip-joint replacement implants
|
95.99 | |
Non-active surgical implants — Joint replacement implants — Specific requirements for hip-joint replacement implants — Amendment 1
|
95.99 | |
Non-active surgical implants — Joint replacement implants — Specific requirements for hip-joint replacement implants
|
60.60 | |
Non-active surgical implants — Joint replacement implants — Specific requirements for knee-joint replacement implants
|
95.99 | |
Non-active surgical implants — Joint replacement implants — Specific requirements for knee-joint replacement implants
|
95.99 | |
Non-active surgical implants — Joint replacement implants — Specific requirements for knee-joint replacement implants — Amendment 1
|
95.99 | |
Non-active surgical implants — Joint replacement implants — Specific requirements for knee-joint replacement implants
|
60.60 | |
Implants for surgery — Wear of total ankle-joint prostheses — Loading and displacement parameters for wear-testing machines with load or displacement control and corresponding environmental conditions for test
|
90.60 |
No matching records found. Please try changing the filter settings.