Filter :
Standard and/or project under the direct responsibility of ISO/TC 172/SC 1 Secretariat | Stage | ICS |
---|---|---|
Photography — Apertures and related properties pertaining to photographic lenses — Designations and measurements
|
95.99 | |
Photography — Apertures and related properties pertaining to photographic lenses — Designations and measurements — Technical Corrigendum 1
|
95.99 | |
Photography — Apertures and related properties pertaining to photographic lenses — Designations and measurements
|
90.93 | |
Photography — Camera lenses — Measurement of ISO spectral transmittance
|
95.99 | |
Optics and photonics — Camera lenses — Measurement of ISO spectral transmittance
|
90.93 | |
Optics and optical instruments — Environmental test methods — Part 1: Definitions, extent of testing
|
95.99 | |
Optics and photonics — Environmental test methods — Part 1: Definitions, extent of testing
|
95.99 | |
Optics and photonics — Environmental test methods — Part 1: Definitions, extent of testing
|
90.93 | |
Optics and optical instruments — Environmental test methods — Part 2: Cold, heat, humidity
|
95.99 | |
Optics and optical instruments — Environmental test methods — Part 2: Cold, heat and humidity
|
95.99 | |
Optics and photonics — Environmental test methods — Part 2: Cold, heat and humidity
|
90.93 | |
Optics and photonics — Environmental test methods — Part 2: Cold, heat and humidity — Amendment 1
|
60.60 | |
Optics and optical instruments — Environmental test methods — Part 3: Mechanical stress
|
95.99 | |
Optics and optical instruments — Environmental test methods — Part 3: Mechanical stress
|
95.99 | |
Optics and photonics — Environmental test methods — Part 3: Mechanical stress
|
95.99 | |
Optics and photonics — Environmental test methods — Part 3: Mechanical stress — Amendment 1
|
95.99 | |
Optics and photonics — Environmental test methods — Part 3: Mechanical stress
|
60.60 | |
Optics and optical instruments — Environmental test methods — Part 4: Salt mist
|
95.99 | |
Optics and optical instruments — Environmental test methods — Part 4: Salt mist
|
95.99 | |
Optics and photonics — Environmental test methods — Part 4: Salt mist
|
90.60 | |
Optics and photonics — Environmental test methods — Part 4: Salt mist — Amendment 1
|
60.60 | |
Optics and optical instruments — Environmental test methods — Part 5: Combined cold, low air pressure
|
95.99 | |
Optics and optical instruments — Environmental test methods — Part 6: Dust
|
95.99 | |
Optics and photonics — Environmental test methods — Part 6: Dust
|
90.93 | |
Optics and optical instruments — Environmental test methods — Part 7: Drip, rain
|
95.99 | |
Optics and optical instruments — Environmental test methods — Part 7: Drip, rain — Technical Corrigendum 1
|
95.99 | |
Optics and photonics — Environmental test methods — Part 7: Resistance to drip or rain
|
95.99 | |
Optics and photonics — Environmental test methods — Part 7: Resistance to drip or rain
|
90.93 | |
Optics and optical instruments — Environmental test methods — Part 8: High pressure, low pressure, immersion
|
95.99 | |
Optics and photonics — Environmental test methods — Part 8: High internal pressure, low internal pressure, immersion
|
90.93 | |
Optics and optical instruments — Environmental test methods — Part 9: Solar radiation
|
95.99 | |
Optics and photonics — Environmental test methods — Part 9: Solar radiation and weathering
|
90.93 | |
Optics and optical instruments — Environmental test methods — Part 10: Combined sinusoidal vibration, dry heat or cold
|
95.99 | |
Optics and optical instruments — Environmental test methods — Part 10: Combined sinusoidal vibration and dry heat or cold
|
95.99 | |
Optics and optical instruments — Environmental test methods — Part 11: Mould growth
|
95.99 | |
Optics and photonics — Environmental test methods — Part 11: Mould growth
|
90.93 | |
Optics and optical instruments — Environmental test methods — Part 12: Contamination
|
95.99 | |
Optics and photonics — Environmental test methods — Part 12: Contamination
|
90.93 | |
Optics and optical instruments — Environmental test methods — Part 13: Combined shock, bump or free fall, dry heat or cold
|
95.99 | |
Optics and optical instruments — Environmental test methods — Part 13: Combined shock, bump or free fall and dry heat or cold
|
95.99 | |
Optics and optical instruments — Environmental test methods — Part 14: Dew, hoarfrost, ice
|
95.99 | |
Optics and photonics — Environmental test methods — Part 14: Dew, hoarfrost, ice
|
90.93 | |
Optics and optical instruments — Environmental test methods — Part 15: Combined random vibration wide band: reproducibility medium, in dry heat or cold
|
95.99 | |
Optics and optical instruments — Environmental test methods — Part 15: Combined digitally controlled broad-band random vibration and dry heat or cold
|
95.99 | |
Optics and optical instruments — Environmental test methods — Part 16: Combined bounce or steady-state acceleration, in dry heat or cold
|
95.99 | |
Optics and optical instruments — Environmental test methods — Part 16: Combined bounce or steady-state acceleration and dry heat or cold
|
95.99 | |
Optics and optical instruments — Environmental test methods — Part 17: Combined contamination, solar radiation
|
95.99 | |
Optics and photonics — Environmental test methods — Part 17: Combined contamination, solar radiation
|
90.93 | |
Optics and optical instruments — Environmental test methods — Part 18: Combined damp heat and low internal pressure
|
95.99 | |
Optics and optical instruments — Environmental test methods — Part 19: Temperature cycles combined with sinusoidal or random vibration
|
95.99 | |
Optics and optical instruments — Environmental test methods — Part 20: Humid atmosphere containing sulfur dioxide or hydrogen sulfide
|
95.99 | |
Optics and photonics — Environmental test methods — Part 20: Humid atmosphere containing sulfur dioxide or hydrogen sulfide
|
90.93 | |
Optics and optical instruments — Environmental test methods — Part 21: Combined low pressure and ambient temperature or dry heat
|
95.99 | |
Optics and photonics — Environmental test methods — Part 22: Combined cold, dry heat or temperature change with bump or random vibration
|
90.93 | |
Optics and photonics — Environmental test methods — Part 23: Low pressure combined with cold, ambient temperature and dry and damp heat
|
95.99 | |
Optics and photonics — Environmental test methods — Part 23: Low pressure combined with cold, ambient temperature and dry or damp heat
|
95.99 | |
Optics and photonics — Environmental test methods — Part 23: Low pressure combined with cold, ambient temperature and dry or damp heat
|
60.60 | |
Optics and optical instruments — Quality evaluation of optical systems — Determination of distortion
|
95.99 | |
Optics and optical instruments — Quality evaluation of optical systems — Determination of distortion — Technical Corrigendum 1
|
95.99 | |
Optics and photonics — Quality evaluation of optical systems — Determination of distortion
|
90.93 | |
Optics and optical instruments — Optical transfer function — Definitions and mathematical relationships
|
95.99 | |
Optics and photonics — Optical transfer function — Definitions and mathematical relationships
|
95.99 | |
Optics and photonics — Optical transfer function — Definitions and mathematical relationships
|
90.93 | |
Optics and photonics — Optical transfer function — Principles and procedures of measurement
|
95.99 | |
Optics and photonics — Optical transfer function — Principles and procedures of measurement — Technical Corrigendum 1
|
95.99 | |
Optics and photonics — Optical transfer function — Principles and procedures of measurement
|
90.92 | |
Optics and photonics — Optical transfer function — Principles and procedures of measurement
|
50.00 | |
Optics and optical instruments — Optical transfer function — Application — Part 1: Interchangeable lenses for 35 mm still cameras
|
95.99 | |
Optics and photonics — Optical transfer function — Application — Part 1: Interchangeable lenses for 35 mm still cameras
|
90.93 | |
Optics and optical instruments — Optical transfer function — Application — Part 2: Lenses for office copiers
|
95.99 | |
Optics and optical instruments — Veiling glare of image forming systems — Definitions and methods of measurement
|
90.60 | |
Optics and optical instruments — Environmental requirements — Part 1: General information, definitions, climatic zones and their parameters
|
95.99 | |
Optics and photonics — Environmental requirements — Part 1: General overview, terms and definitions, climatic zones and their parameters
|
95.99 | |
Optics and optical instruments — Environmental requirements — Part 6: Test requirements for medical optical devices
|
95.99 | |
Optics and photonics — Environmental requirements — Part 6: Test requirements for medical optical instruments
|
95.99 | |
Optics and optical instruments — Environmental requirements — Part 7: Test requirements for optical measuring instruments
|
95.99 | |
Optics and optical instruments — Environmental requirements — Part 8: Test requirements for extreme conditions of use
|
95.99 | |
Optics and photonics — Environmental requirements — Part 8: Test requirements for extreme conditions of use
|
95.99 | |
Optics and optical instruments — Environmental requirements — Part 11: Optical instruments for outdoor conditions of use
|
95.99 | |
Optics and optical instruments — Environmental requirements — Part 12: Conditions of transport for optical instruments
|
95.99 | |
Optics and photonics — Guidance for the selection of environmental tests
|
95.99 | |
Optics and photonics — Guidance for the selection of environmental tests
|
95.99 | |
Optics and photonics — Guidance for the selection of environmental tests
|
60.60 | |
Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 1: General
|
95.99 | |
Optics and photonics — Preparation of drawings for optical elements and systems — Part 1: General
|
95.99 | |
Optics and photonics — Preparation of drawings for optical elements and systems — Part 1: General
|
90.60 | |
Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 2: Material imperfections — Stress birefringence
|
95.99 | |
Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 3: Material imperfections — Bubbles and inclusions
|
95.99 | |
Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 4: Material imperfections — Inhomogeneity and striae
|
95.99 | |
Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 5: Surface form tolerances
|
95.99 | |
Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 5: Surface form tolerances — Technical Corrigendum 1
|
95.99 | |
Optics and photonics — Preparation of drawings for optical elements and systems — Part 5: Surface form tolerances
|
95.99 | |
Optics and photonics — Preparation of drawings for optical elements and systems — Part 5: Surface form tolerances
|
90.92 | |
Optics and photonics — Preparation of drawings for optical elements and systems — Part 5: Surface form tolerances
|
30.99 |
|
Optics and photonics — Preparation of drawings for optical elements and systems — Part 6: Centring and tilt tolerances
|
40.60 | |
Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 6: Centring tolerances
|
95.99 | |
Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 6: Centring tolerances — Technical Corrigendum 1
|
95.99 | |
Optics and photonics — Preparation of drawings for optical elements and systems — Part 6: Centring tolerances
|
90.92 | |
Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 7: Surface imperfection tolerances
|
95.99 | |
Optics and photonics — Preparation of drawings for optical elements and systems — Part 7: Surface imperfection tolerances
|
95.99 | |
Optics and photonics — Preparation of drawings for optical elements and systems — Part 7: Surface imperfections
|
90.93 | |
Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 8: Surface texture
|
95.99 | |
Optics and photonics — Preparation of drawings for optical elements and systems — Part 8: Surface texture; roughness and waviness
|
95.99 | |
Optics and photonics — Preparation of drawings for optical elements and systems — Part 8: Surface texture
|
90.60 | |
Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 9: Surface treatment and coating
|
95.99 | |
Optics and photonics — Preparation of drawings for optical elements and systems — Part 9: Surface treatment and coating
|
90.93 | |
Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 10: Table representing data of a lens element
|
95.99 | |
Optics and photonics — Preparation of drawings for optical elements and systems — Part 10: Table representing data of optical elements and cemented assemblies
|
95.99 | |
Optics and photonics — Preparation of drawings for optical elements and systems — Part 11: Non-toleranced data
|
95.99 | |
Optics and photonics — Preparation of drawings for optical elements and systems — Part 11: Non-toleranced data — Technical Corrigendum 1
|
95.99 | |
Optics and photonics — Preparation of drawings for optical elements and systems — Part 11: Non-toleranced data
|
90.92 | |
Optics and photonics — Preparation of drawings for optical elements and systems — Part 11: Non-toleranced data
|
40.60 | |
Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 12: Aspheric surfaces
|
95.99 | |
Optics and photonics — Preparation of drawings for optical elements and systems — Part 12: Aspheric surfaces
|
95.99 | |
Optics and photonics — Preparation of drawings for optical elements and systems — Part 12: Aspheric surfaces — Amendment 1
|
95.99 | |
Optics and photonics — Preparation of drawings for optical elements and systems — Part 12: Aspheric surfaces
|
90.60 | |
Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 13: Laser irradiation damage threshold
|
95.99 | |
Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 14: Wavefront deformation tolerance
|
95.99 | |
Optics and photonics — Preparation of drawings for optical elements and systems — Part 14: Wavefront deformation tolerance
|
95.99 | |
Optics and photonics — Preparation of drawings for optical elements and systems — Part 14: Wavefront deformation tolerance
|
90.93 | |
Optics and photonics — Preparation of drawings for optical elements and systems — Part 16: Diffractive surfaces
|
60.60 | |
Optics and photonics — Preparation of drawings for optical elements and systems — Part 17: Laser irradiation damage threshold
|
90.93 | |
Optics and photonics — Preparation of drawings for optical elements and systems — Part 18: Stress birefringence, bubbles and inclusions, homogeneity, and striae
|
90.93 | |
Optics and photonics — Preparation of drawings for optical elements and systems — Part 19: General description of surfaces and components
|
90.93 | |
Optics and optical instruments — Accuracy of optical transfer function (OTF) measurement
|
90.92 | |
Optics and photonics — Uncertainty of optical transfer function (OTF) measurement
|
40.00 | |
Optics and optical instruments — General optical test methods — Measurement of relative irradiance in the image field
|
95.99 | |
Optics and photonics — General optical test methods — Measurement of relative irradiance in the image field
|
90.60 | |
Optics and photonics — Test methods for surface imperfections of optical elements — Part 2: Machine vision
|
60.60 | |
Optics and optical instruments — Test methods for surface imperfections of optical elements
|
95.99 | |
Optics and photonics — Test methods for surface imperfections of optical elements
|
95.99 | |
Optics and photonics — Test methods for surface imperfections of optical elements
|
90.93 | |
Optics and photonics — Interferometric measurement of optical elements and optical systems — Part 1: Terms, definitions and fundamental relationships
|
60.60 | |
Optics and photonics — Interferometric measurement of optical elements and optical systems — Part 2: Measurement and evaluation techniques
|
95.99 | |
Optics and photonics — Interferometric measurement of optical elements and optical systems — Part 2: Measurement and evaluation techniques
|
60.60 | |
Optics and photonics — Interferometric measurement of optical elements and optical systems — Part 3: Calibration and validation of interferometric test equipment and measurements
|
60.60 | |
Optics and photonics — Interferometric measurement of optical elements and optical systems — Part 4: Interpretation and evaluation of tolerances specified in ISO 10110
|
95.99 | |
Optics and photonics — Interferometric measurement of optical elements and optical systems — Part 4: Interpretation and evaluation of tolerances specified in ISO 10110
|
90.92 | |
Optics and photonics — Measurement of optical elements and optical systems — Part 4: Interpretation and evaluation of surface form and wavefront deformation tolerances specified in ISO 10110
|
30.99 |
|
Optics and optical instruments — Measurement of reflectance of plane surfaces and transmittance of plane parallel elements
|
95.99 | |
Optics and photonics — Measurement of reflectance of plane surfaces and transmittance of plane parallel elements
|
60.60 | |
Optics and optical instruments — Optical transfer function — Principles of measurement of modulation transfer function (MTF) of sampled imaging systems
|
95.99 | |
Optics and photonics — Optical transfer function — Principles of measurement of modulation transfer function (MTF) of sampled imaging systems
|
95.99 | |
Optics and photonics — Optical transfer function — Principles of measurement of modulation transfer function (MTF) of sampled imaging systems
|
90.93 | |
Optics and optical instruments — Quality evaluation of optical systems — Assessing the image quality degradation due to chromatic aberrations
|
90.93 | |
Optics and optical instruments — Quality evaluation of optical systems — Assessing the image quality degradation due to chromatic aberrations — Technical Corrigendum 1
|
60.60 | |
Optics and photonics — Wavefront sensors for characterising optical systems and optical components
|
60.60 | |
Optics and photonics — Spectroscopic measurement methods for integrated scattering by plane parallel optical elements
|
90.60 | |
Optics and photonics — Preparation of drawings for optical elements and systems — Surface imperfection specification and measurement systems
|
60.60 | |
Optics and photonics — Electronic exchange of optical data — Part 1: NODIF information model
|
95.99 | |
Optics and photonics — Electronic exchange of optical data — Part 1: NODIF information model
|
90.93 | |
Optics and photonics — Electronic exchange of optical data — Part 2: Mapping to the classes and properties defined in ISO 23584
|
90.93 |
No matching records found. Please try changing the filter settings.