ISO 13000-1:2005
Plastics — Polytetrafluoroethylene (PTFE) semi-finished products — Part 1: Requirements and designation
Reference number
ISO 13000-1:2005
Версия 2
2005-11
В время отменен
ISO 13000-1:2005
37664
Отозвано (Версия 2, 2005)

Тезис

ISO 13000-1:2005 specifies the requirements for processed unfilled polytetrafluoroethylene (PTFE) products which may occur in several forms. The PTFE used to make the semi-finished product is described in ISO 12086-1 and, as provided in ISO 12086-1, may contain up to 1 % of a comonomer. The PTFE used to make the semi-finished product may be virgin, reprocessed or recycled resin. The addition of up to 1,5 % by mass of pigment or colorant is permitted. This part of ISO 13000 allows for four grades based on tensile strength and elongation at break. The semi-finished products can be as-processed (type P) or dimensionally stabilized (type S) and may also have specified electrical properties or other properties when they are required for an application.

Общая информация

  •  : Отозвано
     : 2005-11
     : 2006-03
     : 2006-03
    : Отмена международного стандарта [95.99]
  •  : 2
  • ISO/TC 61/SC 9
    83.140.01 
  • RSS обновления

Жизненный цикл

Появились вопросы?

Ознакомьтесь с FAQ