Filter :
Standard and/or project under the direct responsibility of ISO/TC 164/SC 1 Secretariat Stage ICS
Tensile tests for discontinuously reinforced metal matrix composites at ambient temperatures
95.99
Code of practice for creep/fatigue testing of cracked components
90.93
Steel — Tensile testing
95.99
Steel — Tensile testing of sheet and strip less than 3 mm and not less than 0,5 mm thick
95.99
Steel — Tensile testing of wire
95.99
Load calibration of testing machines for tensile testing of steel
95.99
Tensile testing of light metals and their alloys
95.99
Interrupted creep testing of steel at elevated temperatures (load and temperature interrupted)
95.99
Metallic materials — Uninterrupted uniaxial creep testing in tension — Method of test
95.99
Non-interrupted creep testing of steel at elevated temperatures
95.99
Metallic materials — Uniaxial creep testing in tension — Method of test
95.99
Metallic materials — Uniaxial creep testing in tension — Method of test
90.92
Metallic materials — Uniaxial creep testing in tension — Method of test
40.20
Creep stress rupture testing of steel at elevated temperatures
95.99
Steel — Tensile testing of tubes
95.99
Metallic materials — Calibration of force-proving instruments used for the verification of uniaxial testing machines
95.99
Calibration of elastic proving devices
95.99
Metallic materials — Calibration of force-proving instruments used for the verification of uniaxial testing machines
95.99
Metallic materials — Calibration of force-proving instruments used for the verification of uniaxial testing machines
95.99
Metallic materials — Calibration of force-proving instruments used for the verification of uniaxial testing machines
90.93
Tensile testing of copper and copper alloys
95.99
Tensile testing of copper and copper alloy tubes of circular section
95.99
Tensile testing of copper and copper alloy wire
95.99
Metallic materials — Tensile testing at elevated temperature
95.99
Mechanical testing of steel at elevated temperatures — Determination of lower yield stress and proof stress and proving test
95.99
Metallic materials — Tensile testing at elevated temperature
95.99
Tensile testing of light metal and light metal alloy tubes
95.99
Tensile test for light metal and light metal alloy wires
95.99
Copper and copper alloy rolled flat products (thickness less than 2,5 mm (0.1 in)) — Tensile test
95.99
Tensile testing systems — Determination of K-value
95.99
Metallic materials — Tensile testing — Part 1: Method of test at room temperature
95.99
Metallic materials — Tensile testing — Part 1: Method of test at room temperature
95.99
Metallic materials — Tensile testing — Part 1: Method of test at room temperature
60.60
Metallic materials — Tensile testing — Part 2: Method of test at elevated temperature
95.99
Metallic materials — Tensile testing — Part 2: Method of test at elevated temperature
60.60
Metallic materials — Tensile testing — Part 3: Method of test at low temperature
90.93
Metallic materials — Tensile testing — Part 4: Method of test in liquid helium
90.93
Metallic materials — Tensile testing — Part 5: Guideline for testing miniaturised test pieces
30.98
Metallic materials — Tensile testing
95.99
Metallic materials — Tensile testing at ambient temperature
95.99
Metallic materials — Tensile testing — Hollow test piece for internal pressurized test and slow-strain rate tensile test (SSRT) method in high-pressure hydrogen environment
20.00
Metallic materials — Verification of static uniaxial testing machines — Part 1: Tensile testing machines
95.99
Metallic materials — Verification of static uniaxial testing machines — Part 1: Tension/compression testing machines — Verification and calibration of the force-measuring system
95.99
Metallic materials — Verification of static uniaxial testing machines — Part 1: Tension/compression testing machines — Verification and calibration of the force-measuring system
95.99
Metallic materials — Verification of static uniaxial testing machines — Part 1: Tension/compression testing machines — Verification and calibration of the force-measuring system — Technical Corrigendum 1
95.99
Metallic materials — Calibration and verification of static uniaxial testing machines — Part 1: Tension/compression testing machines — Calibration and verification of the force-measuring system
95.99
Metallic materials — Calibration and verification of static uniaxial testing machines — Part 1: Tension/compression testing machines — Calibration and verification of the force-measuring system
60.60
Metallic materials — Verification of static uniaxial testing machines — Part 2: Tension creep testing machines — Verification of the applied load
95.99
Metallic materials — Verification of static uniaxial testing machines — Part 2: Tension creep testing machines — Verification of the applied force
90.93
Metallic materials — Verification of extensometers used in uniaxial testing
95.99
Metallic materials — Calibration of extensometers used in uniaxial testing
95.99
Metallic materials — Calibration of extensometers used in uniaxial testing — Technical Corrigendum 1
95.99
Metallic materials — Calibration of extensometer systems used in uniaxial testing
90.93
Metallic materials — Calibration of extensometer systems used in uniaxial testing — Technical Corrigendum 1
60.60
Measurement uncertainties in mechanical tests on metallic materials — The evaluation of uncertainties in tensile testing
30.99
Mechanical tests on metallic materials - Evaluation of uncertainties in creep testing
20.00
Metallic materials — Tensile testing at low temperature
95.99
Metallic materials — Tensile testing in liquid helium
95.99
Metallic materials — Tensile testing at high strain rates — Part 1: Elastic-bar-type systems
95.99
Metallic materials — Tensile testing at high strain rates — Part 1: Elastic-bar-type systems
60.60
Metallic materials — Tensile testing at high strain rates — Part 2: Servo-hydraulic and other test systems
90.93

No matching records found. Please try changing the filter settings.